Menu
Home
Profile
Sell Machines
Hot Deals
Services
Contact
Leaders in forging solutions
Subscribe
Category : Sheet Metal
Sub-Category : Press Sheet Stamping Mechanical
Total Machines Found :
115
Select
| Machine Details
1
ID
NA30950
Make
Fukui
Model
MDL-500
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Link Motion Press
Capacity : 500 tons,
Stroke : 788 mm,
Stroke per minutes : 20,
Die Height : 1100 mm,
Slide : 2700 x 1700 mm,
Bed : 2700 x 1700 mm,
Die Cushion : 150 ton,
Cushion Stroke : 300 mm,
Cushion Pad : 2300 x 1250 mm.
2
ID
NA30949
Make
Rovetta,Italy
Model
S2-400-1600-1220
YOM
Condition
Good working condition
Photo
See Photo
Type Mechanical press
Capacity : 400 ton,
Slider stroke : 300 mm,
Slider adjustment : 200 mm,
Table working dimensions : 1600 x 1220 mm,
Daylight : 505 mm,
Cushion pressure : 40 ton,
Maximum cushion stroke : 150 mm,
Dimensions (l x w x h) : 3400 x 3400 x 10000 mm,
Weight : 58900 kg.
3
ID
NA30933
Make
WMW Erfurt,Germany
Model
PKnVTVI800.1TS
YOM
1989
Condition
Good Condition
Photo
See Photo
Capacity : 800 tons,
No. of strokes : 16 per min.,
Table size : 1700 x 2500 mm,
Slider size : 2800 x 1700 mm,
Aperture in table : 2400 x 1250 mm,
Maximal effort of pillow in table : 100 tf,
Size of pillow in table : 2380 x 1230 tf,
Width between supports : 2800 mm,
Slider stroke length : 500 mm,
Closer height : 1100 mm,
Height of movable table : 500 mm,
Weight of part table (under floor) without movable parts : 14 tons,
Weight of moving table with reductors part : 6 ton,
Weight pillow in table : 10 tons,
Total weight of table : 30 tons,
Weight of slider : 15 tons,
Weight of cheek (each) : 6.5 tons,
Weight of cross-arm without parts : 16 tons,
Weight of cross-arm without roller of flywheel, roller of muff, muff, brake : 25 tons,
Weight of roller of flywheel 3.5 ton,
Weight of roller of muff + muff + brake 16 ton,
Total weight of cross arm : 44.5 tons,
Total weight of press : 120 tons.
4
ID
NA30932
Make
Muller Weingarten
Model
YOM
1997
Condition
Good Condition
Photo
See Photo
Capacity : 2000 tons,
5
ID
NA30853
Make
WMW Erfurt,Germany
Model
PKZV800
YOM
1980
Condition
Good working condition
Photo
See Photo
Capacity : 800 tons,
Nominal Force : 8000 kN,
Ram stroke : 500 mm,
Adjustability of slide : 500 mm,
Shut height : 1700 mm,
Width between columns : 4000 mm,
Slide area (width x depth) : 3950 x 2500 mm,
Bed area (width x depth) : 4000 x 2500 mm,
Opening in bed (width x depth) : 3520 x 1520 mm,
Main motor power : 90 kW,
Idle stroke rate : 17 / MIN,
Counter pressure of cushion (in bed) : 1600 kN,
Height above ground, from : 8400 mm,
Machine Weight. : 170 tons.
Front moving bed.
6
ID
NA30852
Make
WMW Erfurt,Germany
Model
PKZV800
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Capacity : 800 tons,
Nominal Force : 8000 kN,
Ram stroke : 500 mm,
Number of ram strokes : 14 / min.–1,
Bed-to bolster plate adjustment : 500 mm,
Shut height : 1700 mm,
Size of bed : 4000 x 2500 mm,
Size of ram : 3950 x 2500 mm,
Gap size of table : 3520 x 1520 mm,
Cushions‘ power on table : 1600 kN
Tables‘ ejector (cushion) : 200 mm,
Main drive motor power : 90 kW,
Height above floor level, approx. : 8400 mm,
Weight, approx. : 230 tons.
7
ID
NA30851
Make
WMW Erfurt,Germany
Model
PKZZ1250
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Capacity : 1250 tons,
Ram stroke: 630 mm,
Ram stroke per minute:11,
Shut height: 1165 mm,
Ram adjustment : 630 mm,
Bed: 4000 x 1800 mm,
Ram: 3950 x 1800 mm,
Cushion in bed:
- Stroke: 250 mm,
- Capacity: 2500 kN,
Air pressure: 0,5-0,7 Mpa.
Main motor: 125 kW,
Press overall dimensions: 7000 x 4300 mm,
Height above floor level:9500 mm,
Press weight: approx. 245000 kg.
8
ID
NA30850
Make
OKK
Model
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Capacity : 300 tons,
Stroke : 450 mm,
Stroke per minutes : 16,
Die Height : 700 mm,
Adjust : 200 mm,
Bolster : 2150 x 1350 mm,
Slide : 1950 x 1200 mm,
Die Cushion : 50 ton,
Cushion Stroke : 225 mm,
Cushion Pad : 1500 x 860 mm.
9
ID
NA30835
Make
Schuler German
Model
YOM
retrofitting in 2009
Condition
Good Condition
Photo
See Photo
Capacity : 800 tons,
With 4000 x 2500 mm moving table
10
ID
NA30821
Make
Clearing
Model
F42000-180
YOM
Condition
Under power
Photo
See Photo
4-Point Mechanical Straight Side Press
w/ Rolling Bolster 4572 x 3048 mm,
Specifications
Max Pressing Force : 2000 tons
Bed / Rolling Bolster : 4572 x 3048 x 304 mm,
Ram Size : 4419 x 3048 mm,
Shut Height SDAU 1752 mm,
Stroke of Ram : 4016 mm,
Ram Adjustment : 762mm,
Bed Cushion: 600-Ton / 3886 x 2057 mm,
Cushion Stroke : 406 mm,
Distance between Upright Gibs : 4445 mm,
Load & Brake Monitor,
Air Clutch and Counterbalance
Pit Mounted
NO WINDOWS
11
ID
NA30799
Make
AIDA,Japan
Model
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Link Drive Mechanical Press :
Capacity : 500 tons,
Stroke : 605 mm,
Stroke per Min : 20,
Die Height : 1200 mm,
Adjust : 600 mm,
Bolster : 3050 x 1700 mm,
Slide : 3050 x 1700 mm,
Moving Bolster Stroke : 2750 mm,
Die Cushion : 1 pad, 2 cylinders,
Cushion Capacity : 150 tons,
Cushion Stroke : 250 mm,
Cushion Pad : 2450 x 1250 mm,
Main Motor : 110 Kw x 6p.
Press has a side moving bolster and die cushions.
12
ID
NA30789
Make
WMW Erfurt,Germany
Model
PKZZ315FS
YOM
1989
Condition
Good Condition
Photo
See Photo
apacity : 315 tons,
Stroke : 400 mm,
Bed dimensions : 2500 x 1400 mm,
Ram dimensions : 2450 x 1400 mm,
Distance between stands : 2530 mm,
Nr. of points : 2,
Ram adjustment : 400 mm,
Speed : 18 min,
Shut height : 750 mm,
Bed cushion power : 63 tons,
Bed cushion stroke : 160 mm,
Main motor : 45 kW,
Floor space required : 4300 x 2500 mm,
Height over floor : 6000 mm,
Machine Weight : 60 tons.
13
ID
NA30788
Make
WMW Erfurt,Germany
Model
PKZZIV500.1FS
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Stroke : 500 mm,
Table surface : 2800 x 1800 mm,
Ram surface : 2800 x 1700 mm,
Slide adjustment : 500 mm,
Shut height ca. : 1100 mm,
Main motor : 75 kW,
Number of strokes : 20 s.p.m.
Cushion in bed : 100 t,
Cushion stroke : 200 mm,
Height over floor ca. : 7600 mm,
Weight of the press ca. : 145 tons.
14
ID
NA30773
Make
Komatsu
Model
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Stroke : 600 mm,
SPM : 20,
Die Height : 1500 mm,
Adjust : 650 mm,
Bolster : 2750 x 1700 mm,
Slide : 2750 x 1700 mm,
Die Cushion : 120 tons,
Cushion Stroke : 300 mm,
Cushion Pad : 2300 x 1300 mm,
Qty : 2 Nos.
The presses have 2 left to right moving bolsters each, and die cushions.
15
ID
NA30765
Make
TMP Voronezh Russia
Model
K2542
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 1600 tons,
Work Table : 1600 x 1600 mm,
Slider Stroke : 400 mm,
Distance between table and the slider : 870 mm,
Number of moves per minute : 16,
16
ID
NA30754
Make
AIDA,Japan
Model
YOM
Condition
Very good condition
Photo
See Photo
Transfer Press :
Capacity : 700 tons,
Stroke : 500 mm,
Stages : 6,
Stage Capacity : 250 tons,
Stroke per Min : 10 -25,
Die Height : 1040 mm,
Adjust : 80 mm,
Bolster : 3600 x 1600 mm,
Drawing depth : 180 mm,
Feed Stroke : 600 mm,
Crank Stroke : 200 mm,
Feed Bar Gap : 700, 900, 1100 mm,
Die Cushion : 30 tons,
Cushion Stroke : 190 mm,
Knockout Capacity : 5 tons,
Knockout Stroke : 190 mm,
Main Motor : 150 Kw.
17
ID
NA30736
Make
WMW Erfurt,Germany
Model
PKZZI500FS
YOM
1982
Condition
Disassembled
Photo
See Photo
Capacity : 500 tons,
Stroke : 500 mm,
Table : 2800 x 1800 mm,
Ram : 2800 x 1700 mm,
Mould height : 1220 mm.
18
ID
NA30725
Make
Minster
Model
E2-500-72-42
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Bed area : 1800 X 1050 mm,
Stroke length : 150 mm,
Shut height (sdau) : 775 mm,
Slide adjustment (powered) : 150 mm,
Strokes per minute : 30-80,
Windows (W x H) : 825 X 500 mm.
Wintriss SmartPac Press Control
Hydraulic Overload Protection
7" Bolster
19
ID
NA30721
Make
Verson
Model
S2-800-84-72T
YOM
Condition
Good Condition
Photo
See Photo
|
See Video
Capacity : 800 tons
Bed area : 2100 X 1800 mm,
Stroke length : 300 mm,
Shut height : 1000 mm,
Slide adjustment (powered) : 250 mm,
Strokes per minute : 30
Window size : 1400 mm,
Air Clutch and Brake
Air Counterbalances
75 hp Main Motor
10.5" T-Slotted Bolster
Overall Weight : 95.2 tons.
20
ID
NA30718
Make
Komatsu
Model
E2W-250
YOM
2006
Condition
Good working condition
Photo
See Photo
Capacity : 250 tons,
Stroke : 300 mm,
Stroke per min : 22 - 44,
Die Height : 550 mm,
Adjust : 120 mm,
Bolster : 2400 x 950 mm,
Slide : 2100 x 700 mm,
Qty : 2 nos,
Press has a die cushion.
21
ID
NA30708
Make
WMW Erfurt,Germany
Model
PKZZI1250
YOM
Condition
Good Condition
Photo
See Photo
Straight side Sheet Stamping Press :
Max. slider force at the distance of 12,5 mm in the lower dead point : 1250 tons,
Slider force at the distance of 250 mm in the lower dead point : 350 tons,
Number of single strokes per minute : 11,
Slider stroke : 630 mm,
Slider adjustment : 630 mm,
The closed height : 1165 mm,
Table pillow :
-Max. stroke : 250 mm,
-Stroke adjustment : 250 mm,
-Max. holding force : 250 tons,
-Max. ejection force : 40 tons,
Table dimensions : 4000 x 1800 mm,
Bolster dimensions : 3950 x 1800 mm,
Table gap : 3750 x 1300 mm,
Main motor power : 132 kW,
Stay spacing : 4000 mm,
Press weight : 215 tons,
Weight of a table in assembly with an exhaust pillow and a plate of a pusher : 42.6 tons,
Weight of a table (without built in details) : 27.4 tons,
Weight of an exhaust pillow : 3000 kg,
Weight of a plate of a pusher : 5400 kg,
Weight of a lateral rack in assembling : 8000 kg,
Weight of a cross-arm in assembling : 44000 kg,
Weight of a cross-arm without built in details : 24.8 tons,
Weight of the top part of a cross-arm : 7800 kg,
Weight of a shaft of a flywheel with a pine forest with a muff and brakes : 16.9 tons,
Weight of a slider in assembling : 33.6 tons,
Weight of coupling bolts : 3400 kg.
22
ID
NA30706
Make
Schuler German
Model
YOM
2005
Condition
Good Condition
Photo
See Photo
H-Frame Knuckle Joint Press
Capacity : 1500 tons,
Stroke : 80 mm,
Bed L-R : 2500 mm,
Bed F-B : 1600 mm,
Max Operating Pressure : 400 Bar,
Strokes per minute : 20 to 70,
Max. Rotational speed of fly wheel : 362 rpm,
Tool Holder adjustment : 10 mm,
Feeder - strip width : 440 - 1850 mm,
Max. Tool dimensions : 2000 x 1600 x 800 mm,
Max. Tool weight : 15000 kg (33,000 lbs),
Operational pressure min/max for compressed air : 6.0 bar,
Clutch/brake : 5.5-6.0 bar,
Approx. Weight of machine :110,000 Kg,
Approx. Shipping weight : 120,000 Kg,
Electrical books are available.
23
ID
NA30701
Make
Komatsu
Model
L1B500
YOM
Condition
Good working condition
Photo
See Photo
Link Motion, Heavy Stamping Press :
Capacity : 500 tons,
Stroke : 300 mm,
Stroke per Min. : 15 - 40,
Die Height : 650 mm,
Adjust : 150 mm,
Bolster : 1200 x 1200 mm,
Slide : 1200 x 1100 mm,
Side Opening : 800 x 700 mm,
Main Motor : VS45 Kw.
24
ID
NA30700
Make
Schuler German
Model
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Capacity : 800 tons,
Table : 2800 x 2000 mm,
Stroke : 850 mm,
Slide adjustment : 500 mm.
Quantity no. : 2.
25
ID
NA30665
Make
Hiro
Model
YOM
Condition
Good Condition
Photo
See Photo
|
See Video
Capacity : 1000 tons,
Stroke : 600 mm,
Die Height : 1440 mm,
Stroke per minutes : 12,
Adjust : 300 mm,
Bolster : 3710 x 2200 mm,
Slide : 3200 x 2100 mm,
Cushion : 240 ton,
Cushion Stroke : 300 mm.
26
ID
NA30652
Make
AIDA,Japan
Model
NC2-250(2)
YOM
1994
Condition
Good Condition
Photo
See Photo
C frame press
Capacity : 250 tons,
Stroke : 280 mm,
Stroke per minutes : 20 - 35,
Die Height : 550 mm,
Adjust : 120 mm,
Bolster : 2700 x 920 mm,
Slide :2100 x 700 mm.
Complete with uncoiler leveler feeder unit
Make : Orii,
Material Width : 500 mm,
Material Thickness : 0.6 - 6.0 mm.
27
ID
NA30651
Make
Kobelco(Kobe Steel)
Model
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 500 ton,
Stroke : 500 mm,
Stroke per minutes : 20,
Die Height :1200 mm,
Adjust : 200 mm,
Table : 2140 x 1070 mm,
Ram : 2140 x 1070 mm,
Cushion Capacity : 60 ton,
Cushion Stroke : 200 mm
Die Cushion Type : 1 Pad, 2 Cylinders
Cushion Pad : 1390 x 680 mm.
28
ID
NA30630
Make
TMP Voronezh Russia
Model
K3540
YOM
1975
Condition
Good working condition
Photo
See Photo
Capacity : 1000 tons,
Ram stroke :400 mm,
Stroke per minutes : 20,
Shut height : 1060 mm,
Adjustment : 320 mm,
Ram dimensions :3150 x 1700 mm,
Moving table (left - right) dimensions : 3150 x 1800 mm,
Bolster plate thickness : 260 mm,
Height above floor level : 7830 mm,
Main motor power : 132 kW,
Dimensions : 5150 x 4700 mm,
Weight : 193 tons.
29
ID
NA30629
Make
Rovetta,Italy
Model
S2-400-2740-1520
YOM
Condition
Good Condition
Photo
See Photo
Mechanical Double Column Press :
Capacity : 400 tons,
Strokes per minute : 20,
Slide stroke : 508 mm,
Light uprights : 2790 mm,
Slide adjustment : 305 mm,
Dimension table : 2740 x 1520 mm,
Table height from floor : 530 mm,
Vertical light (stroke down – adjustment up) : 1080 mm,
Cushion capacity at 6,5 atm : 75 tons,
Cushion stroke adjustable : 104+254 mm,
Main motor power : 50/1500 HP/n.
30
ID
NA30607
Make
Komatsu
Model
OBS110-K2
YOM
1979
Condition
Good Condition
Photo
See Photo
110 ton single crank press,
Capacity : 110 ton,
Stroke : 150 mm,
Stroke per minutes : 50,
Die Height : 380 mm,
Slide Adjustment : 100 mm,
Slide Area : 600 x 450 mm,
Bolster Area : 1100 x 700 x 100 mm.
31
ID
NA30596
Make
Shimomura
Model
YOM
Condition
Good working condition
Photo
See Photo
Capacity : 1000 tons,
Stroke : 600 mm,
Stroke per minutes : 12,
Adjust : 400 mm,
Bolster : 4000 x 2000 mm,
Slide : 3700 x 1800 mm,
Die Height : 1100 mm,
Open Height : 1700 mm,
Die Cushion : 50 tons x 2 = 100 tons,
Cushion Stroke : 300 mm,
Cushion Pad : 1500 x 1450 mm x 2.
The press has a moving bolster and a die cushion.
32
ID
NA30563
Make
TMP Voronezh Russia
Model
K4537
YOM
Condition
Good working condition
Photo
See Photo
Capacity : 500 tons,
Table size : 3200 x 1700 mm,
Ram stroke : 630 mm,
Shut height : 1850 mm,
Stroke per minute : 18 SPM,
Main motor : 100 kW,
Dimensions : 6305 x 5010 x 8380 mm,
Weight : 192.
With pull-out tables.
33
ID
NA30556
Make
Weingarten
Model
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Stroke : 762 mm,
Reg. : 610 mm,
Daylight : 1450 mm,
Number stroke/min. : 12 – 25,
Distance between the columns : 3.360 mm,
Slide : 3040 mm x 1670 mm,
Moving bolster : 3040 mm x 1670 mm,
Lateral passage : 1900 mm,
Main Motor force : 80 Kw,
Height from the floor : 9200 mm,
Complete of nr. 2 ( two ) lateral ( side ) Moving bolsters.
34
ID
NA30547
Make
WMW Erfurt,Germany
Model
PE 4-H-500/2800x1800 TS
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Capacity : 500 tons,
Ram stroke : 500 mm,
Number of strokes per minutes : 25,
Adjustable ram : 400 mm,
Min. built-in tool height : 720 mm,
Max. built-in tool height : 1120 mm,
Table cushion:
- Stroke : 200 mm,
- Stroke adjustment : 200 mm,
- Retention force max. : 1000 kN,
Ejection force : 1000 kN,
Main motor power :90 kW,
Approach power : 37 kW,
Table area : 2800 x 1800 mm,
Machine weight : 145 tons.
With Lateral Moving Bolster.
35
ID
NA30545
Make
TMP Voronezh Russia
Model
KA3540
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Capacity : 1000 tons,
Ram stroke :400 mm,
Stroke per minutes : 20,
Shut height : 1060 mm,
Adjustment : 320 mm,
Ram dimensions :3150 x 1700 mm,
Moving table (left - right) dimensions : 3150 x 1800 mm,
Bolster plate thickness : 260 mm,
Height above floor level : 7830 mm,
Main motor power : 132 kW,
Dimensions : 5150 x 4700 mm,
Weight : 193 tons,
With Lateral Moving Bolster.
36
ID
NA30534
Make
Fukui
Model
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 300 tons,
Stroke : 500 mm,
Die Height : 850 mm,
Stroke per minutes : 10 - 20,
Adjust : 250 mm,
Bolster :2500 x 1300 mm,
Slide : 2500 x 1300 mm,
Die Cushion Capacity : 52 ton,
Cushion Stroke : 1 - 200 mm,
Pad Size : 2050 x 850 mm.
37
ID
NA30533
Make
Fukui
Model
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Stroke : 500 mm,
Die Height : 1100 mm,
Stroke per minutes : 10 - 20,
Adjust : 350 mm,
Bolster : 2500 x 1500 mm,
Slide : 2500 x 1500 mm,
Die Cushion Capacity : 80 ton,
Cushion Stroke : 1 - 250 mm,
Pad Size : 2050 x 1100 mm.
38
ID
NA30526
Make
Komatsu
Model
YOM
Condition
Good Condition
Photo
See Photo
Tandem line of two 300 ton Komatsu presses
Capacity : 300 tons,
Stroke : 450 mm,
Die Height : 650 mm,
Die Height : 840 mm,
Stroke per minutes : 15 - 25,
Adjust :200 mm,
Adjust : 350 mm,
Bolster : 2500 x 1300 mm,
Slide : 2500 x 1200 mm,
Die Cushion : 1 pad, 2 cylinders,
Die Cushion Capacity : 40 ton,
Cushion Stroke : 220 mm,
Pad Size : 2000 x 650 mm.
Quantity No. : 2
One press has a die cushion, but the other one has had the cushion removed
The cushion holes are in the bolster.
39
ID
NA30506
Make
TMP Voronezh Russia
Model
KB3537
YOM
Condition
Excellent
Photo
See Photo
Capacity : 500 tons,
Slide stroke : 250 mm,
No. of strokes/min 25
Shut height 750 mm
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2380 x 1200 mm,
Main motor power 47 kW
Overall dimensions : 4350 x 2470 x 5660 mm,
Height above floor : 5660 mm,
Press weight : 70 tons,
Full complete, electric cabinet and die cushion is also included.
40
ID
NA30468
Make
AIDA,Japan
Model
YOM
Condition
Excellent
Photo
See Photo
Capacity : 350 ton,
Stroke : 450 mm,
Stroke per Min : 16,
Adjust : 250 mm,
Dei height : 800 mm,
Bolster : 2500 x 1520 mm,
Slide : 2500 x 1520 mm,
Die Cushion : 80 tons,
Die Cushion Stroke : 250 mm.
41
ID
NA30463
Make
WMW Erfurt,Germany
Model
PKZZ250
YOM
1972
Condition
Good Condition
Photo
See Photo
Capacity : 250 tons,
Centres of pressure : 2,
Stroke of slide : 400 mm,
Adjustability of slide : 120 mm,
Max. daylight between bolster and slide, SDAU, : 580 mm,
Width between columns : 2500 mm,
Slide area (W x D) : 2320 x 1250 mm,
Bed area (W x D): 2500 x 1400 mm,
Opening in bed (W x D) : 2300 x 850 mm,
Main motor power :32 kW,
Idle stroke rate, per min : 12,
Counterpressure of cushion in bed : 50 ton,
Stroke of cushion plate : 160 mm,
Height above ground : 5000 mm.
42
ID
NA30430
Make
Verson
Model
SE4-600-132-86
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 600 tons,
Bed area : 3300 X 2150 mm,
Stroke length : 550 mm,
Shut height (sdau over bed) : 1600 mm,
Adjustment : 600 mm,
Opening in side columns (windows) : 1500 mm,
Strokes per minute : 14
Equipped With :
3 cushions : 35.3 tons @100 psi,
Stroke :275 mm ,
Hydraulic Tie Rod Nuts,
Qty No : 3.
43
ID
NA30411
Make
Yodogawa
Model
-
YOM
Condition
Good Condition
Photo
See Photo
Type H Frame Press
Capacity : 200 tons,
Die Height : 400 mm,
Stroke : 100 mm,
SPM : 40,
Adjust : 100 mm,
Bolster :1600 x 1400 mm.
44
ID
NA30404
Make
Fukui
Model
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 350 tons,
Stroke : 450 mm,
Die Height : 700 mm,
Stroke per min : 16,
Adjust : 250 mm,
Bolster : 2130 x 1370 mm,
Slide : 2130 x 1370 mm,
With Die Cushion.
45
ID
NA30399
Make
Komatsu
Model
L2G300-BM
YOM
Condition
Good Condition
Photo
See Photo
Link Motion Press :
Capacity : 300 tons,
Stroke : 450 mm,
Stroke per Min : 15 - 30,
Die Height : 650 mm,
Adjust : 200 mm,
Bolster : 2100 x 1350 mm,
Ram : 1900 x 1200 mm.
46
ID
NA30396
Make
AIDA,Japan
Model
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Transfer Press :
Capacity : 300 tons,
Stroke : 300 mm
Stroke per min : 25 - 40,
Bolster : 2500 x 1300 mm,
Slide : 2450 x 1000 mm,
Die Height : 725 mm,
Adjust : 100 mm,
Machine Type : Blank Feeder
Feed Stroke : 250 mm,
Clamp Stroke : 80 mm,
SPM : 40,
Finger Bar Width : 360 mm,
Stages : 9.
with Moving bolster and die cushions as well as a blank feeder.
47
ID
NA30381
Make
Fukui
Model
MTE1100
YOM
1983
Condition
Good Condition
Photo
See Photo
Transfer Press
Press Driving : Top drive / crankless
No of point : 2 Points
Transfer device : 2 Dimensional working
Capacity : 1100 tons,
Power ability Location / lower point : 13 mm,
Length of Stroke : 300 mm,
Die height from the top surface of bolster to the bottom surface of slide : 710 mm,
Slide adjust : 50 mm,
No of stroke : In case of 2 Dimensional working , 20-30 spm,
Effective working volume : No. of stroke : 20. 25. 30,
Effective working Volume : 20. 20.7 21.0
No of station : 13
Interval of station : 300 mm,
Slide size / Left to Right x Front to Back : 3900 x 1100 mm,
Bolster size : 4000 x 1100 mm / thickness 280 mm,
Permisible loading weight : 200 Ton ( Blanking station 35 ton )
Maximum part of height : 80 mm
Balancer capacity : In case of air pressure 8 kgf/sq.cm, Adapter' plate weight+Top side w't : 7 ton.
-Blanking Station :
Pressing capacity : 250 tons
Power ability Location / lower point : 13 mm,
Length of stroke : 100 mm,
Die height from the top surface of bolster to the bottom surface of slide : 320 mm,
Adjustment of slide : 25 mm,
No of stroke : 25~30 spm,
Size of slide : 600 x 1600 mm,
Size of bolster : 600 x 1600 mm,
Blanking Size : Dia 85 ~ 170,
Balancer capacity : In case of air pressure 8 kgf/sq.cm, Adapter' plate weight+Top side w't : 7 ton.
13 stages for production automobile's motor case.
Technical manuals are Available.
48
ID
NI6571
Make
Impact
Model
P&U-W
YOM
2016
Condition
Good Condition
Photo
See Photo
Machine Type : H Type
Capacity : 250 tons,
Slide Stroke : 300 mm,
Die Height : 500 mm,
Slide Adjustment : 150 mm,
Bolster Size : 1000 X 950 mm,
Slide Area : 850 X 950 mm,
Die Cushion : Yes,
Cushion Capacity : 140 KN,
No of Machines : 2.
49
ID
NI6570
Make
Impact
Model
PUX
YOM
2016
Condition
Good Condition
Photo
See Photo
Machine Type : C Type
Capacity : 110 tons,
Slide Stroke : 180 mm,
Die Height : 360 mm,
Slide Adjustment : 90 mm,
Bolster Size : 1160 X 680 mm,
Slide Area : 650 X 520 mm,
No of Machines : 2.
50
ID
NI6569
Make
Impact
Model
PUX-W
YOM
2016
Condition
Good Condition
Photo
See Photo
Machine Type : C Type
Capacity : 80 tons,
Slide Stroke : 150 mm,
Die Height : 390 mm,
Slide Adjustment : 80 mm,
Bolster Size : 1050 X 630 mm,
Slide Area : 550 X 450 mm,
No of Machines : 2.
51
ID
NI6567
Make
AIDA,Japan
Model
NC1-2500
YOM
2017
Condition
Good Condition
Photo
See Photo
Machine Type : C Type
Capacity : 250 tons,
Slide Stroke : 300 mm,
Die Height : 540 mm,
Slide Adjustment : 120 mm,
Bolster Size : 1750 X 900 mm,
Slide Area : 1100 X 730 mm,
Die Cushion : Yes,
Cushion Capacity : 140 KN,
No of Machines : 2.
52
ID
NI6566
Make
AIDA,Japan
Model
NC1-1100
YOM
2017
Condition
Good Condition
Photo
See Photo
Machine Type : C Type
Capacity : 110 tons,
Slide Stroke : 180 mm,
Die Height : 350 mm,
Slide Adjustment : 90 mm,
Bolster Size : 1070 X 680 mm,
Slide Area : 630 X 520 mm,
Die Cushion : No.
53
ID
NI6565
Make
AIDA,Japan
Model
NC1-1500
YOM
2017
Condition
Good Condition
Photo
See Photo
Machine Type : C Type
Capacity : 150 tons,
Slide Stroke : 200 mm,
Die Height : 400 mm,
Slide Adjustment : 100 mm,
Bolster Size : 1170 X 760 mm,
Slide Area : 700 X 580 mm,
Die Cushion : No.
54
ID
NA30338
Make
TMP Voronezh Russia
Model
K4537
YOM
1979
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Ram stroke : 630 mm,
Stroke per minutes : 18 SPM,
Table size : 3200 x 1700 mm,
Shut height : 1850 mm,
Main motor : 100 kW,
Dimensions : 6305 x 5010 x 8380 mm,
Weight : 192 tons,
Quantity No. : 3.
55
ID
NA30266
Make
TMP Voronezh Russia
Model
KA3732
YOM
Reconditioned 2004
Condition
Good Condition
Photo
See Photo
Capacity : 160 tons,
Table 2000 x 1250
Slider stroke : 200 mm
Closed height : 630 mm
Number of ram strokes (1/min) : 45,30,22,
Output of main motor :23 kW,
Height of the machine : 4490 mm,
Width of the machine : 3125 mm,
Length of the machine : 2035 mm,
Weight of the machine : 30 tons.
56
ID
NA30249
Make
WMW Erfurt,Germany
Model
PKZV5001FS
YOM
1988
Condition
Good Condition
Photo
See Photo
|
See Video
Capacity : 500 tons,
Ram stroke : 500 mm,
Stroke per minutes : 20 SPM,
Adjustment of ram : 500 mm,
Shut height : 1000 mm,
Distance between columns : 2800 mm,
Ram size : 2800 x 1800 mm,
table size : 2800 x 1800 mm,
Bore in table : 2400 x 1250 mm ,
Main motor power : 75 KW,
Capacity of die cushion : 100 tons,
Travel of plate of cushion 200 mm ,
Height over floor : 7350 mm.
With Moving Bolster
57
ID
NA30246
Make
TMP Voronezh Russia
Model
KA3540
YOM
1991
Condition
Good Condition
Photo
See Photo
Capacity : 1000 tons,
Ram stroke :400 mm,
Stroke per minutes : 20,
Shut height : 1060 mm,
Adjustment : 320 mm,
Ram dimensions :3150 x 1700 mm,
Moving table (left - right) dimensions : 3150 x 1800 mm,
Bolster plate thickness : 260 mm,
Height above floor level : 7830 mm,
Main motor power : 132 kW,
Dimensions : 5150 x 4700 mm,
Weight : 193 tons,
With Moving bolster.
58
ID
NA30240
Make
TMP Voronezh Russia
Model
KB3537
YOM
Condition
Good working condition
Photo
See Photo
Capacity : 500 tons,
Slide stroke : 250 mm,
No. of strokes/min 25
Shut height 750 mm
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2380 x 1200 mm,
Main motor power 47 kW
Overall dimensions : 4350 x 2470 x 5660 mm,
Height above floor : 5660 mm,
Press weight : 70 tons.
59
ID
NA30228
Make
WMW Erfurt,Germany
Model
PKZZIV500.1FS
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Stroke : 500 mm,
Table surface : 2800 x 1800 mm,
Ram surface : 2800 x 1700 mm,
Slide adjustment : 500 mm,
Shut height ca. : 1100 mm,
Main motor : 75 kW,
Number of strokes : 20 s.p.m.
Cushion in bed : 100 t,
Cushion stroke : 200 mm,
Height over floor ca. : 7600 mm,
Weight of the press ca. : 145 tons.
Quantity No. : 2
60
ID
NA30220
Make
TMP Voronezh Russia
Model
K4039A
YOM
1994
Condition
Good Condition
Photo
See Photo
Capacity : 800 ton,
Ram Stroke : 800 mm,
Number of ram stroke : 20 spm,
Shut height : 1400 mm,
Bolster plate to ram adjustment : 500 mm,
Bed dimensions : 4000 x 2240 mm,
Ram dimensions : 4000 x 2240 mm,
Bolster plate thickness : 250 mm,
Main power drive : 132 kW,
Press dimensions : 6360 x 5250 x 8950 mm,
Press Weight : 260 ton.
61
ID
NA30158
Make
TMP Voronezh Russia
Model
KA3539A
YOM
1979
Condition
Good Condition
Photo
See Photo
H - Frame
Capacity : 800 tons,
Ram stroke : 320 mm,
Number of ram strokes : 20 min.–1,
Bed-to bolster plate adjustment : 320 mm,
Shut height : 900 mm,
Size of bed : 2500 x 1600 mm,
Size of ram : 1400 mm,
ZThickness of stamping plate : 250 mm,
Capacity of upper ejector : 40 tons,
All capacity of all pneum. cushions : 80 tons,
Works stroke of all cushions : 100 tons,
Press dimensions :
- from left to right : 4600 mm,
- from front to back : 3280 mm,
Height of press above floor level : 6325 mm,
Main drive motor power : 76.8 kW
Weight, approx. : 86 tons.
62
ID
NA30133
Make
Shimomura
Model
YOM
1985
Condition
Good Condition
Photo
See Photo
4 Column Mechanical Press
Capacity : 500 tons,
Stroke : 450 mm,
Stroke per min. : 15,
Die Height : 800- 1100 mm,
Adjust : 300 mm,
Bolster : 2500 x 1500 mm,
Slide : 2500 x 1500 mm,
Die Cushion : 50 ton x 2,
Cushion Stroke : 2225 mm.
Cushion Pad : 1100 x 920 mm x 2.
Technical manuals available
63
ID
NA30085
Make
Seyi,Taiwan
Model
SE4-800
YOM
2013
Condition
Good working condition
Photo
See Photo
Tandem Press :
Capacity : 800 tons,
Stroke : 300 mm,
Strokes : 13-23 spm,
Die Height : 1300 mm,
Slide Adjustment : 600 mm,
Slide Area : 3000 X 2200 mm,
Bolster Area : 3000 X 2200 mm,
Cushion Capacity : 120 tf,
Cushion Area : 2400 X 1500 mm,
Air Pressure : 6 kg/m2,
Main Motor : 150 X 4 HP x P,
Power Source : 380 V, 50 Hz, 225 KVA,
Braking Time : 355.5 ms.
64
ID
NA30084
Make
Seyi,Taiwan
Model
SE4-600
YOM
2013
Condition
Good working condition
Photo
See Photo
Tandem Press :
Capacity : 600 tons,
Stroke : 300 mm,
Strokes : 13-23 spm,
Die Height : 1400 mm,
Slide Adjustment : 600 mm,
Slide Area : 3000 X 2200 mm,
Bolster Area : 3000 X 2200 mm,
Cushion Capacity : 100 tf,
Cushion Area : 2400 X 1500 mm,
Air Pressure : 6 kg/m2,
Main Motor : 100x4 HPxP,
Power Source : 380 V, 50 Hz, 157 KVA,
Braking Time : 310 ms.
65
ID
NI6527
Make
Erfurt
Model
-
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 400 tons,
Plunger guided press
66
ID
NI6526
Make
Erfurt
Model
-
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 315 tons,
67
ID
NI6525
Make
Clearing
Model
-
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 315 tons,
With plunger guided.
68
ID
NI6524
Make
Clearing
Model
S2-250-84-54
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 250 tons,
69
ID
NI6523
Make
Erfurt
Model
PEEI400/400
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 400 tons,
Ram stroke : 40-140 mm,
Ram adjustment : 125 mm,
SPM : 32 SPM,
Cushion ejector capacity : 25 tons,
Cushion ejector stroke : 88 mm,
Table size : 1250 x 750 mm,
Ram size : 800 x 630 mm.
70
ID
NI6518
Make
Schuler German
Model
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Capacity : 3000 tons,
Shut height : 1200 mm,
Bed : 1800 * 1000 mm,
Appx. weight : 600 tons.
With cushion.
71
ID
NA29922
Make
Verson
Model
L4-500-108-72T
YOM
New in 1995
Condition
Good working condition
Photo
See Photo
|
See Video
Link Drive Mechanical Press :
Manufactured new in 1995
Capacity : 500 tons,
Stroke : 600 mm,
Speed : 6 - 20 SPM,
Bed & Slide Area : 2700 x 1800 mm,
Shut Height : 1900 mm SDAU to bed (1300 mm to bolster),
Adjustment : 675 mm.
Combined cushion capacity : 90.8 tons
Cushion stroke : 212 mm,
Weight of the press : 141 tons,
The press has (2) side-moving bolsters.
Dismantled and stored in our warehouse.
Quantity No. : 2.
72
ID
NA29919
Make
Verson
Model
LE4-800-120-60t
YOM
1994
Condition
Good working condition
Photo
See Photo
Link Drive Mechanical Press :
Capacity : 800 tons,
Bed Area : 3000 x 1500 mm,
Slide Area : 3000 x 1500 mm,
Stroke : 750 mm,
Adjustment : 50 mm,
Shut Height :1975 mm over bed SDAU,
Shut Height (Over Rolling Bolster) : 1550 mm over bolster,
Strokes per Minute : 7-18,
Windows : 1650 mm wide,
Overall Weight : 328 tons,
Overall Height : 26’ floor to top of air tanks,
Note: Air Tanks could be relocated, which could reduce the overall height by 30” approx..
Equipped With :
Link Drive Motion
Air Clutch and Brake
Air Counterbalances
Recirculating Lube System
Motorized Adjustment
Eaton IDT Panelmate Control
Shut Height Indicators
T-Slotted Ram and Bolster
10" Thick Bolster Plate
66" Wide Windows
Hydraulic Tie Rod Nuts
Hydraulic Overloads
Helm Loadguard Trend Series 4 Load Monitor
Die Clamping
Palm Button Stand
(2) Sets of Sick Light Curtains
Dual Rolling Bolster Thru The Windows- 17” thick
Motors and Controls
It has Allen Bradley controls.
73
ID
NA29859
Make
TMP Voronezh Russia
Model
KB3537
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Slide stroke : 250 mm,
No. of strokes/min 25
Shut height 750 mm
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2380 x 1200 mm,
Main motor power 47 kW
Overall dimensions : 4350 x 2470 x 5660 mm,
Height above floor : 5660 mm,
Press weight : 70 tons.
74
ID
NA29784
Make
WMW Erfurt,Germany
Model
PKZZ800
YOM
Condition
Good working condition
Photo
See Photo
Capacity : 800 tons,
Max ram force at a distance before the bottom dead center : 12.5 mm,
Ram force at a distance before the bottom dead center 200 mm,
Max . work at 10 strokes per min . : 30 kJ,
Max . Work at 1-4 strokes per min . : 50 kJ,
Ram stroke : 500 mm,
Adjustability of slide : 500 mm,
Cushion in the table :
- 200 mm,
- Adjustability 200 mm stroke,
- Protipřidržovací force 1600 kN,
- Ejection force of 250 kN,
Number of strokes: 1-10 / min,
Number of strokes 14/min running on empty,
Shut height : 1050 mm,
Table dimensions: 3150 x 1600 mm,
Slide dimensions : 3100 x 1600 mm,
The passage between columns : 3150 mm,
The height from the floor to the top edge of table : 600 mm,
Number of ejector rails in the ram : 5 pcs,
The track bouncers : 50 mm,
Total power bouncers : 245 Kn,
Main motor output : 100 kW,
Press height above floor : 8430 mm,
Weight: 145 tons.
75
ID
NA29723
Make
TMP Voronezh Russia
Model
KB3537
YOM
1978
Condition
Good working condition
Photo
See Photo
|
See Video
Capacity : 500 tons,
Slide stroke : 250 mm,
No. of strokes/min 25
Shut height 750 mm
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2380 x 1200 mm,
Main motor power 47 kW
Overall dimensions : 4350 x 2470 x 5660 mm,
Height above floor : 5660 mm,
Press weight : 70 tons.
76
ID
NA29696
Make
WMW Erfurt,Germany
Model
PKZZIII250.1FS
YOM
1990
Condition
Good working condition
Photo
See Photo
Capacity : 250 tons,
No.of strokes : 20-25 per min.,
Moving (front -back) table : 2500 x 1250 mm,
Slide stroke : 400 mm,
Ram Size : 2500 x 1250 mm,
Table opening : 2100 x 850 mm,
Slide adjustment : 250 mm,
Shut height : 800 mm,
Cushion stroke : 160 mm,
Cushion capacity : 50 tons,
Distance between columns : 2500 mm,
Main motor power : 45 kW,
Length : 4650 mm, Width : 3600 mm, Height : 11250 mm,
Weight : 62 tons.
With Hydraulic Pneumatic Cushion,
With HOS.
77
ID
NA29687
Make
TMP Voronezh Russia
Model
K4542A
YOM
1969
Condition
Good Condition
Photo
See Photo
Four crank single action close frame press
Capacity : 1600 tons,
Stroke : 710 mm,
Stroke per min. : 16,
Shut height : 1220 mm,
Bolster plate-to-ram adjustment stroke : 500 mm,
Bed dimension : 4000 x 2240 mm,
Ram dimension : Bolster plate thickness : 4000 x 2240 mm,
Main drive motor power : 350 kW,
Overall dimension :
Floor space : 6310 x 7375 mm,
Height above floor level: 9100 mm,
Weight : 300 tons.
78
ID
NA29614
Make
WMW Erfurt,Germany
Model
PKZZIII250.1FS
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 250 tons,
No.of strokes : 20-25 per min.,
Moving (front -back) table : 2500 x 1250 mm,
Slide stroke : 400 mm,
Ram Size : 2500 x 1250 mm,
Table opening : 2100 x 850 mm,
Slide adjustment : 250 mm,
Shut height : 800 mm,
Cushion stroke : 160 mm,
Cushion capacity : 50 tons,
Distance between columns : 2500 mm,
Main motor power : 45 kW,
Length : 4650 mm, Width : 3600 mm, Height : 11250 mm,
Weight : 62 tons.
79
ID
NA29601
Make
WMW Erfurt,Germany
Model
PKZZ250/2500
YOM
1975
Condition
Good Condition
Photo
See Photo
Capacity : 250 tons,
Ram stroke : 400 mm,
No. of strokes : 25/min.,
Ram adjustment : 120 mm,
Shut height : 720 mm,
Bed 2500 x 1400 mm,
Windows in bed : 2300 x 850 mm,
Ram : 2320 x 1250 mm,
Main drive motor : 32 kW.
80
ID
NA29599
Make
Russian
Model
K3033B
YOM
1992
Condition
Good Condition
Photo
See Photo
Capacity : 200 tons,
Number of ram strokes per minute : 32,
Ram stroke : 320 mm,
Stroke path till its position where it develops nominal capacity : 8 mm,
Shut height : 500 mm,
Table size : 1250 x 2000 mm,
Bolster plate-to-ram adjustment stroke : 200 mm,
Bolster plate thickness : 160 mm,
Upper ejector capacity : 20 ton,
Upper ejector stroke : 100 mm,
Cushion capacity : 20 ton,
Cushion stroke : 90 mm,
Motor power : 18 kW,
Press dimensions : 3380 x 2400 x 5000 mm,
Press Weight : 22.5 tons.
81
ID
NA29589
Make
Niagara
Model
SE2-1000-108-60
YOM
1989
Condition
Good Condition
Photo
See Photo
Capacity : 1000 tons,
Stroke : 500 mm,
Bed area : 2700 x 1500 mm
Shut height : 1050 mm SDAU,
Slide Adjustment : 300 mm,
Window size (W x H ) : 1850 x 1900 mm,
Speed : 20 SPM.
Equipped With:
Air Clutch & Brake,
Air Counterbalances,
Air Cushions 123 Tons / 250 Stroke,
2-Point Eccentric Geared Drive,
Recirculating Oil Lube.
82
ID
NA29571
Make
WMW Erfurt,Germany
Model
PKZZ800
YOM
1980
Condition
Disassembled
Photo
See Photo
|
See Video
Capacity : 800 tons,
Max ram force at a distance before the bottom dead center : 12.5 mm 8000 kN,
Ram force at a distance before the bottom dead center 200 mm 2500 kN,
Max . work at 10 strokes per min . : 30 kJ,
Max . Work at 1-4 strokes per min . : 50 kJ,
Ram stroke : 500 mm,
Adjustability of slide : 500 mm,
Cushion in the table :
- 200 mm,
- Adjustability 200 mm stroke,
- Protipřidržovací force 1600 kN,
- Ejection force of 250 kN,
Number of strokes: 1-10 / min,
Number of strokes 14/min running on empty,
Shut height : 1050 mm,
Table dimensions: 3150 x 1600 mm,
Slide dimensions : 3100 x 1600 mm,
The passage between columns : 3150 mm,
The height from the floor to the top edge of table : 600 mm,
Number of ejector rails in the ram : 5 pcs,
The track bouncers : 50 mm,
Total power bouncers : 245 Kn,
Main motor output : 100 kW,
Press height above floor : 8430 mm,
Weight : 145 tons.
83
ID
NA29510
Make
WMW Erfurt,Germany
Model
PKZVIII500.1FS
YOM
Condition
Good working condition
Photo
See Photo
Capacity : 500 tons,
Slide stroke: 500 mm,
Slide adjustment: 500 mm,
Max. shut height between bolster plate and slide (stroke down, adjustment up): 1200 mm,
Bed area: 3150 x 2100 mm,
Slide area: 3150 x 2100 mm,
Opening in the bed: 2500 x 1600 mm,
Main motor rating: 75 kW,
Strokes per minute: 20,
Cushion force in the bolster: 100 ton,
Cushion stroke: 200 mm.
84
ID
NA29385
Make
Erfurt
Model
PKZVIV500
YOM
Recond 2005
Condition
Good Condition
Photo
See Photo
H-frame press,
Capacity : 500 tons,
Stroke : 500 mm,
Number of strokes max : 20 /min,
PRESS TABLE
clamping surface (left-right) : 2800 mm,
clamping surface (front-back): 1800 mm,
RAM
clamping surface (left-right) : 2800 mm,
clamping surface (front-back) : 1800 mm,
With moving bolster.
Press with hydraulic tool clamp units and blank loading device.
Table without die cushion.
PLC Control.
Mechanical Stand Alone Press with SIEMENS S 7 CNC Control.
85
ID
NA29367
Make
Komatsu
Model
E4F
YOM
1981
Condition
Good Condition
Photo
See Photo
Single action,
Capacity : 1000 tons,
Stroke Length : 990 mm,
Die Height : 400~579 mm,
Slide : 178 mm,
SPM : 9~15,
Upright between : 3500,
Bolster : 3400 x 2000 x 300 mm,
Slide Area : 3000 x 1550 mm,
Floor to bed surface : 10000 mm,
Floor to Bolster : 750 mm.
Level Feeder attached
Coiler attached
attached De-Coiler.
No Die-cushion.
86
ID
NA29238
Make
Cattaneo
Model
S4.800.4500.2T3
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 800 tons,
Slide stroke : 600 mm,
Strokes X minute : 16 min.,
Shut height : 900 mm,
Slide adjustment : 400 mm,
Bed size: 4500 x 2000 mm,
Moving bolster front to back : 4500 X 2000 mm,
Slide area : 4500 x 2000 mm,
Upright opening : 2500 mm,
Height above floor of table : 450 mm,
Max height above floor : 6500 mm,
Press weight about : 220 ton,
Plc siemens : S7 300,
Moving Bolster : NR.. 2 T. truck,
Soundprofed : YES,
Electronic three axis transfer : T3 N. 2308,
Maker / Costruttore HYDROMEC
X Programmable stroke : 0-1000 mm.
Y-Corsa Di chiusura (lavoro) : 800+800 mm,
Hydraulic overload : Yes,
Soundprofed : Yes,
87
ID
NA29230
Make
Weingarten
Model
VK2000.43.85
YOM
Overhauled in 2000
Condition
Disassembled
Photo
See Photo
|
See Video
Link drive press.
Capacity : 2200 tons,
Stroke : 825 mm,
SPM : 8 to 15 (Variable),
Bed size (Can be increased to 4300 mm L-R) : 4000 x 2150 mm,
Shut height (Over bolster) : 1475 mm,
Adjustment : 350 mm,
Windows : 1775 mm,
Cushions (bed and ram),
New Siemens controls installed in 2000.
88
ID
NA29204
Make
AIDA,Japan
Model
YOM
2014
Condition
Brand New
Photo
See Photo
Type: Free motion 4 points / Top drive /Non-branza,
Pressing force : 10000 kN (1000 ton),
Moving bolster(1ea, side moving type)
Slide Stroke : 800 mm,
SPM : 1~27,
Die. height : 1100 mm,
Slide adjustment : 500 mm,
Slide area (L.R X F.B) : 3500 x 2200 mm,
Bolster size (L.R X F.B) : 3500 x 2200 mm,
Bolster thickness : 700 mm,
Main motor:Servo motor x 2 set(Make:AIDA),
Electric supply: AC380 V, AC 220V, 50HZ,
Main motor voltage : AC400V,
Other motors : AC 380V,
Operation circuit voltage: AC 100 V /DC 24 V,
Air pressure : 0.5 Mpa,
(Die cushion)
Type : Knewmatic type
1 pad 2 cylinder
Force: 500-2000
Stroke : 300 mm,
Stroke adjustment : 250 mm,
Pad size (L.R X F.B): 2900 x 1700 mm,
(Moving bolster)
Hydraulic type
Side moving type
Max die weight : 25 ton,
Traverse : 6200 mm,
(Press dimension)
6650 x 6450 x 9500 mm(from floor)
Press depth : 5500 mm,
Press weight: approximately 310 ton.
89
ID
NA29188
Make
WMW Erfurt,Germany
Model
PKZVIII500.1FS
YOM
Condition
Good Condition
Photo
See Photo
Straight side single action mechanical press :
Max. pressing force of slide (at 12,5 mm distance to the lower dead point) : 500 tons,
Max. pressing force of slide (at 200 mm distance to the lower dead point) : 160 tons,
Number of single strokes at continuous work per minute : 20,
Distance between side columns : 2800 mm,
Slide stroke : 500 mm,
Slide adjustment : 500 mm,
Max. extract depth : 200 mm,
Max. shut height between bolster plate and slide (stroke down, adjustment up) : 1200 mm,
Height of pull-out table : 500 mm,
Bed area (width x depth) : 3150 x 2100 mm,
Slide area (width x depth) : 3150 x 2100 mm,
Opening in the bed (width x depth) : 2500 x 1600 mm,
Main motor power : 75 kW,
Number of no-load strokes per minute : 20,
Cushion force in the bolster : 100 tons,
Cushion stroke : 200 mm,
Cushion plate dimensions : 2480 x 1580 mm,
Height above floor : 7200 mm,
Lower ejector is available.
Equipped with a mechanical overload protection.
90
ID
NA29051
Make
TMP Voronezh Russia
Model
K3537
YOM
1974
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Slide stroke : 250 mm,
No. of strokes/min 25
Shut height 750 mm
Table dimensions : 2500 x 1400 mm,
Slide dimensions : 2380 x 1200 mm,
Main motor power 47 kW
Overall dimensions : 4350 x 2470 x 5660 mm,
Height above floor : 5660 mm,
Press weight : 70 tons.
91
ID
NA29041
Make
USI Clearing
Model
S2-400-108-60
YOM
Condition
Good working condition
Photo
See Photo
|
See Video
Capacity: 400 ton,
Stroke : 610 mm,
Bed area : 2743 x 1524 mm,
Shut height : 1118 mm,
Speed : 20 spm,
Adjustment : 305 mm,
Slide area : 2743 x 1524 mm,
Number of cushions: 2,
Cushion stroke: 203 mm,
Quantity: 4.
92
ID
NA29032
Make
Ravne,Germany
Model
DE315
YOM
1988
Condition
Good working condition
Photo
See Photo
Capacity : 315 ton,
Ram stroke : 400 mm,
SPM : 18,
Adjustment of ram : 250 mm,
Stroke of ejector in ram : 80 mm,
Cushion stroke : 155 mm,
Shut height : 700 mm,
Weight : 75 ton.
93
ID
NA28898
Make
Hitachi,Zosen
Model
PSM-2-500
YOM
1969
Condition
Good Condition
Photo
See Photo
Capacity : 500 ton,
Stroke length : 610 mm,
Slide area : 1550 x 2550 mm,
Moving bolster (2 set) : 1550 x 2150 mm,
Die height : 715-1315,
Die cushion : 120 ton,
Quantity No. : 2.
94
ID
NA28891
Make
Komatsu
Model
E2S400MB
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 400 ton,
Stroke : 500 mm,
Spm : 18,
Slide height : 2060 mm,
Die height : 1350 mm,
Adjustment : 500 mm,
Sd :2800 x 1700 mm
Bs : 2800 x 1700 mm,
Die cushion 1 pad 2 cylinder 100 ton.
95
ID
NA28841
Make
WMW Erfurt,Germany
Model
PKZZIV500FS
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Stroke : 500 mm,
Ram adjustment : 500 mm,
Shut height : 1100 mm,
Distance between columns : 2800 mm,
Table size : 2800 x 1800 mm,
Ram size : 2800 x 1700 mm,
Main motor : 104 kW,
Main voltage : 380 V,
Number of strokes : 20 s.p.m.,
Height over floor approx. : 7600 mm,
Qty No. : 4.
96
ID
NA28826
Make
AIDA,Japan
Model
PDM30
YOM
Condition
Excellent
Photo
See Photo
Capacity : 300 ton,
Stroke : 600 mm,
Stroke per minutes : 14,
Die height : 600 mm,
Bolster : 2130 x 1350 mm,
Slide : 1900 x 1200 mm,
Adjust : 200 mm,
Die cushion : 50 ton,
Cushion strike : 300 mm,
Pad : 810 x 880 x 2.
97
ID
NA28796
Make
Weingarten
Model
VK1000.43.85
YOM
Recond 2005
Condition
Excellent
Photo
See Photo
Link drive press.
Capacity : 1100 tons,
Stroke : 825 mm,
SPM : 8-15,
Bed size : 4000 x 2150 mm (Can be increased to 4250 mm L-R),
Shut height (over bolster) : 1500 mm,
Adjustment : 350 mm,
Quantity No. : 2.
98
ID
NA28793
Make
WMW Erfurt,Germany
Model
PKZZI500
YOM
Condition
Good Condition
Photo
See Photo
Capacity 500 tons,
Slide stroke : 500 mm,
Slide adjustment : 500 mm,
Shut height : 920 mm,
Bed area : 2800 x 1500 mm,
Slide area : 2750 x 1500 mm,
Capacity on ram : 200 mm
Till lower dead point : 160 tons ,
Opening in the bed : 2600 x 1060 mm,
Main motor power : 55 kW,
Cushion capacity in the bolster : 100 ton,
Cushion stroke : 200 mm,
Height above floor level : 7200 mm.
99
ID
NA28779
Make
AIDA,Japan
Model
NC2-250(1)
YOM
Condition
Good Condition
Photo
See Photo
Press Sheet Stamping Mechanical
Make : Aida,
Model : NC2-250(1)
Capacity : 250 ton,
Stroke : 170 mm,
SPM : 25 - 55
Die height : 550 mm,
Adjust : 120 mm,
Slider : 2100 x 700 mm,
Bolster : 2700 x 760 mm,
With hydraulic overload system (HOS)
Feeder
Make : Orii,
Model : LCC06HPNAX
Thickness : 06 - 6.0 mm,
Width : 600 mm,
Coil : Internal : 508 mm,
Coil External : 1500 mm,
Coil Weight : 3000 Kgs,
Including coil car : 2700 x 760 mm.
100
ID
NI6331
Make
Verson
Model
SC4-400-108-70
YOM
1980
Condition
Good Condition
Photo
See Photo
Capacity : 400 tons,
Bed Area : 2700 x 1750 mm,
Slide area : 2700 x 1750 mm,
Stroke : 600 mm,
Speed :20 SPM
Slide Adjustment : 150 mm,
Shut Height : 1250 mm
Operating Pressure : 70 PSL
Cushion Capacity : 80 ton,
Cushion Stroke : 300 mm,
Weight : 60 ton (Aprx).
101
ID
NA28689
Make
WMW Erfurt,Germany
Model
PKZZIV315.1TS
YOM
1979
Condition
Good Condition
Photo
See Photo
Max capacity of slide : 315 tons,
Press stroke : 400 mm,
Close height between table and slide : 750 mm,
Table size : 2500 x 1400 mm,
Slide size : 2450 x 1400 mm,
Free running number : 25,
Cushion table capacity : 63 t,
Cushion stroke : 160 mm,
Main electric motor power : 55 kW,
Height above floor, approx. : 6000 mm,
Machine weight : 105 000 Kg.
102
ID
NA28632
Make
Manzoni Italy
Model
2MR400.125
YOM
1995
Condition
Good Condition
Photo
See Photo
Capacity : 400 ton,
Slide stroke : 125 mm,
Stroke per minute : 34-100 min,
Hydraulic overload,
Shut height : 700 mm,
Slide adjustment : 200 mm,
Bed size : 1600 x 1000 mm,
Slide area : 1500 x 1000 mm,
Upright opening : 800 mm,
Power of main motor : 48/16 kW,
Height above floor of table : 1100 mm,
Max height above floor : 4685 mm,
Overall dimensions : 2730 x 3150 x 4685 mm,
Press weight about : 47 ton,
PLC Siemens S7/300,
Pilz P2HZ5,
Static load : 470 Kn,
Dynamic load : 540 Kn,
Specific load : 318 kn,
Electrical cabinet : 1600 x 600 x 2100 H.
103
ID
NA28603
Make
WMW Erfurt,Germany
Model
PKZZIV500.IFS
YOM
1981
Condition
Good Condition
Photo
See Photo
Capacity : 500 tons,
Table surface : 2800 x 1800 mm,
Ram surface : 2800 x 1700 mm,
Stroke : 500 mm,
Slide adjustment : 500 mm,
Shut height ca. : 1100 mm,
Main motor : 75 kW,
Number of strokes : 20 s.p.m.
Cushion in bed : 100 t,
Cushion stroke : 200 mm,
Height over floor ca. : 7600 mm,
Weight of the press ca. : 145 tons.
Centres of pressure : 2.
Gears in very good condition,
Electric part to be overhauled.
104
ID
NA28308
Make
WMW Erfurt,Germany
Model
PKZZI1250
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 1250 ton,
Stroke of the slide : 630 mm,
Adjustment of the slide : 630 mm,
Shut height (stroke down; adjustment up) : 1165 mm,
Table size : 4000 x 1800 mm,
Slide size : 3950 x 1800 mm,
Hole in the table : 3750 x 1300 mm,
Main motor power : 132 Kw,
No of strokes per min : 11,
Cushion capacity : 2500 kN,
Cushion stroke : 250 mm,
Height over the floor : appr .9500 mm,
Weight : 240 Ton.
105
ID
NA28218
Make
Weingarten
Model
VK500.34.85
YOM
1974
Condition
Disassembled
Photo
See Photo
Link drive presses.
Capacity : 500 tons,
Stroke of slide : 850 mm,
No of stroke : 9-18/min,
distance table/ram, max. stroke up, adjustment up : 2050 mm,
Table surface area : 3100 x 1900 mm,
Table height over floor : 400 mm,
Side window : 1550 mm,
Ram surface : 3100 x 1900 mm,
Ram adjustment : 350 mm,
Upper draw cushion force : 70 tons,
Upper draw cushion stroke : 150 mm,
Lower draw cushion force : 140 tons,
Lower draw cushion stroke : 0-250 mm,
Stroke area L/R x F/B : 3100 x 1900 mm,
Shut height : 1200 mm,
Voltage : 380/50 V/Hz,
Height beneath floor : 6000 mm,
Height over floor : 8300 mm,
Dimensions (W x D x H) : 5100 x 4500 x 12300 mm,
Weight : 155 tons.
Equipped with :-
Schuetz Hardware press control.
2 Die cart per press.
Qty : 4 nos.
106
ID
NA27852
Make
Rovetta,Italy
Model
SC2-300-1220-1070
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 300 ton,
Slide stroke : 400 mm,
Strokes X minute : 15 min,
Upright opening : 800 x 580 mm,
Bed Size : 1220 X 1070 mm,
Bed cushion stroke : 200 mm,
Bed cushion capacity : 50 ton,
Power of main motor : 40 kW.
107
ID
NA27448
Make
Verson
Model
LE4-800-120-60t
YOM
New 1996
Condition
Very good condition
Photo
See Photo
|
See Video
Capacity : 800 ton,
Stroke : 750 mm,
Shut height : 1975 mm,
Adjustment : 50 mm,
FB bed area : 3000 x 1500 mm,
FB slide area : 3000 x 1500 mm,
Speed : 7-18 spm,
With link drive motion,
With air clutch and brake,
With air counterbalances,
With recirculating lube system,
With motorized adjustment,
T-slotted ram and bolster,
10" thick bolster plate,
66" wide windows,
Hydraulic tie rod nuts,
Hydraulic overloads,
Helm load guard trend series 4 load monitor,
panel mate operators controls,
Dual rolling bolster through the windows,
No of moving bolster : 2,
Moving bolster direction : left to right,
Motors and controls.
No of Presses 2.
Technical manual available.
108
ID
NA27243
Make
TMP Voronezh Russia
Model
K3535A
YOM
Condition
Dismantled,Good condition
Photo
See Photo
Capacity : 315 tons,
Ram stroke : 400 mm,
SPM : 25,
Shut height : 750 mm,
Bed to ram adjustment stroke : 250 mm,
Bed dimensions : 2500 x 1250 mm,
Ram dimensions : 1000 x 1000 mm,
Bolster plate thickness : 180 mm,
Main drive motor power : 47 kW,
Overall dimensions : 4555 x 2900 x 6850 mm,
Mass : 50.9 tons.
109
ID
NA26595
Make
TMP Voronezh Russia
Model
KA3540
YOM
1990
Condition
Excellent
Photo
See Photo
Capacity : 1000 tons,
Ram stroke :400 mm,
Stroke per minutes : 20,
Shut height : 1060 mm,
Adjustment : 320 mm,
Ram dimensions :3150 x 1700 mm,
Moving table (left - right) dimensions : 3150 x 1800 mm,
Bolster plate thickness : 260 mm,
Height above floor level : 7830 mm,
Main motor power : 132 kW,
Dimensions : 5150 x 4700 mm,
Weight : 193 tons.
Press has 2 connecting rods.
110
ID
NA26256
Make
WMW Erfurt,Germany
Model
PKZZ500
YOM
1977
Condition
Good Condition
Photo
See Photo
Maximum force of slide : 500 tons,
Stroke of slide : 500 mm,
Adjust ability of slide : 500 mm,
Max. daylight between bolster and slide, SDAU 1100 mm,
Width between columns : 2800 mm,
Slide area (W x D) : 2800 x 1700 mm,
Bed area (W x D) : 2800 x 1800 mm,
Opening in bed (W x D) : 2400 x 1250 mm,
Main motor power : 75 kW,
Idle stroke rate : 20 per min,
Counter pressure of cushion in bed : 100 tons,
Stroke of cushion plate : 200 mm,
Height above ground : 7600 mm.
111
ID
NA24757
Make
Kieserling
Model
SKPN800/2000
YOM
1970
Condition
Good working condition
Photo
See Photo
|
See Video
Capacity : 800 ton,
Distance between rams : 2000 mm,
Distance between guide ways : 1830 mm,
Stroke : 600 mm,
Min / Max Distance between table and ram : 400 / 800 mm,
Ram adjustment : 400 mm,
Ram dimension : 1800 x 1400 mm,
Thickness ram plate : 225 mm,
Stroke min : 14-20,
Max capacity of ram cushion : 32 ton,
Table dimension : 1800 x 1400 mm,
Thickness table plate : 225 mm,
Main motor : 105 kw,
Ram adjustment : 7,5 kw,
Cushion adjustment : 5,5 kw,
Equipped with decoiler : 10ton,
Combined straightening and feed device,
Width : 300-1300 mm,
Thickness : 0,8-6 mm,
With cushion, pressure of cushion 32 tons.
Technical manuals available.
112
ID
NA24179
Make
TMP Voronezh Russia
Model
KB3537
YOM
1981
Condition
Good Condition
Photo
See Photo
|
See Video
500 tons, slide stroke 250mm, table dimensions 2500 x 1400mm, slide dimensions 2380 x 1200mm, overall dimensions 4350 x 2470 x 5660mm, height above floor 5660mm, press weight 70 tons. Press with pneumatic die cushions .
113
ID
NA19842
Make
Bret
Model
2PAM16
YOM
Condition
Good Condition
Photo
See Photo
Force (at 12 mm from LDC) 1600 KN
Double connecting rod
Table area 1000 x 850 mm,
Ram area 1000 x 850 mm,
Fixed stroke 120 mm,
Die height (stroke down, adjustment in) 590 mm,
Motorised adjustment 100 mm,
Variable stroking rate 50 to 120 str./min,
Low cushion 160 KN stroke 25 mm,
Motor 37 KW,
Weight 25 T.
Nota: line equipped with:
uncoiler Gaudias et Bergeron,
straightener maxi width 400 mm,
Mechanical feeder maxi thickness 3 mm,
Scrap-cutter.
114
ID
NI5257
Make
Minster
Model
P150-28
YOM
Condition
Good Condition
Photo
See Photo
Capacity: 150 tons,
W/Air Clutch,
Stroke : 4,
Slide Adjustment : 4,
Bed : 1016 mm x 712 mm (Approx.),
Bolster : 3,
Window : 508 mm x 305 mm,
Palm Buttons
115
ID
NI5256
Make
Cleveland,Ohio
Model
11F110T
YOM
Condition
Good Condition
Photo
See Photo
Capacity : 110 tons,
Shut Height : W/444 mm,
Slide Adjustment : 88 mm,
Stroke Per minute : 36 SPM,
Bed Size : 711 x 610 mm,