Leaders in forging solutions

Subscribe

Category : Sheet Metal

Sub-Category : Press Hydraulic

Total Machines Found : 8

Select	| Machine Details
1	ID NA30766 Make Muller Model ZE600 YOM Condition Very good condition Photo See Photo Capacity : 600 tons, Distance between columns : 2600 mm, Stroke : 900 mm, Dayligth : 1600 mm, Table-size : 2000 x 1600 mm, Ram surface : 2000 x 1600 mm, Oil volume : 3900 L, Die cushion hydr. Pressure / Stroke : 250 ton / 400 mm, Main drive : 55 kW, Total power : 200 kW, Dimensions of the machine : 2200 x 35800 x 7700 mm, Total weight : 110 tons.
2	ID NA30640 Make Hydrap,Germany Model HPDZb-160 YOM 1991 Condition Good Condition Photo See Photo Hydraulic Double Column Punching and Drawing Press Capacity : 160 tons, Ram stroke : 1000 mm, Table size : 1400 x 900 mm, Ram speed : 129 m/s, Motor power : 90 kW, Weight : 28 tons.
3	ID NA30544 Make Dnepropetrovsk,Russia Model D2238 YOM Condition Good Condition Photo See Photo Capacity : 630 tons, Ram stroke : 630 mm, Table size : 1400 x 1400 mm, Distance between table and ram : 1260 mm, Cylinder diameter : 500 mm, Side cylinders diameter : 140 mm, Pressure : 320 bar, Main power drive : 20 kW, Machine dimensions : 2745 x 2327 x 5870 mm, Press weight : 33 tons.
4	ID NA30471 Make Amino Model YOM Condition Good Condition Photo See Photo Capacity : 200 tons, Stroke : 800 mm, Daylight : 1200 mm, Bolster :1600 x 1200 mm, Descending speed : 100 mm/sec, Working speed : 6 mm/sec, Raising speed : 75 mm/sec, Die Cushion : 5 - 50 tons, Cushion Stroke : 150 mm, Cushion Pad : 1100 x 800 mm, Cushion Speed : 23 mm/sec.
5	ID NA29864 Make Magnum Model SITI1500 YOM Condition Good working condition Photo See Photo Machine is short stroke hyd press. Capacity : 1500 tons, Max. shakeout force : 24 tons, Bed size - Approx : 1350 mm x 700 mm, Die height - 720 mm, Stroke - 210 mm, Press in the oleodynamic circuit : 145 bar - 145 MPa, Max. pressure in the oleodynamic (Pressing Cylinder) : 360 bar - 36 MPa, Oil capacity of the system : 500 kg, Viscosity of the oil : 32 cSt, Viscosity index of the oil : 163, Max. pressurizing pressure : 15 bar, Power of the el. motor for oleod. central unit : 975 kW, Die heating power : 34 kW, Optional power : 18 kW, Oil heating power : 2 kW, Total installed power : 1353 kW, Total weight (without the dies) : 36000 kg. Copy of manual book.
6	ID NA29594 Make Neagari,Japan Model YOM 1985 Condition Good Condition Photo See Photo Capacity : 400 tons, Stroke : 1000 tons, Open height : 1500 mm, Close height : 500 mm, Pressing speed : 190 mm/sec, Bolster size : 1000 x 1000 mm, Main pump : 540 L/min, 300 kg/cm2 3set, Main motor : 3300 V, 60HZ, 220KW x 6P 3set.
7	ID NA29593 Make Neagari,Japan Model YOM 1978 Condition Good Condition Photo See Photo Capacity : 350 tons, Stroke : 900 mm, Open height : 1400 mm, Close height : 500 mm, Pressing speed : 230 mm/sec, Bolster size : 1000 x 1000 mm, Main pump : 375 L/min, 300 kg/cm2 3set, Main motor : 3300 V, 220 KW x 6p 3set.
8	ID NA29338 Make Fagor Model EOD80 YOM 2000 Condition Good Condition Photo See Photo Capacity : 800 tons, Control : SIEMENS S7-314 + Industrie-PC, Rated force of ram adjustable : 800 tons, Range of force adjustable : 80 tons to 800 tons, Table size : 1900 x 1500 mm, Height of table on floor : 700 mm, Ram size : 1900 x 1500 mm, daylight Ram and table : 450 to 1250 mm, Stroke top : 2500 mm, Ram stroke : 800 mm, Rapid speed of ram: 250 mm / sec, Working speed of ram: 7 to 22 mm/sec, Return fast speed of ram : 230 mm/sec, Distance between columns : 1950 mm, lateral distance between columns : 1350 mm, Cushion force in bed : 250 tons, Stroke : 250 mm, Dimensions : 1300 x 1000 mm, Cushion in ram : 150 tons, Stroke : 250 mm, Dimensions : 1150 x 1000 mm, Connected load : 65 kW, Weight : 55 tons.