subscribe newsletter
Subscribe

Category : Forging Equipment

Sub-Category : Header Cold

Total Machines Found : 12

Select | Machine Details
 
  1
IDNA30832
MakeNational Kayser
Model1000-6Si
YOM1974
ConditionGood working condition
PhotoSee Photo
Diameter range : 28 mm,
Cutting length : 152 mm,
Shaft length under head : 127 mm,
Output pieces/min : 70,
Distance between die : 20 mm,
Die diameter : 1365 mm,
Die center distance : 8825 mm,
Type of current of power network : alternating three-phase current,
Voltage : 380 V,
Current frequency : 50,
Press power : 400 tons,
L x W x H: 6000 x 3500 x 2300 mm,
Weight : 63 tons.
 
  2
IDNA30594
MakeNational Kayser
Model5/8-5BM
YOM1972
Conditiongood mechanical condition
PhotoSee Photo
Positions: 4
Speed: 60 beats per minute,
Maximum wire diameter: 19 mm,
Minimum workpiece length: 40 mm,
Maximum workpiece length: 190 mm,
Maximum thread length: 76 mm,
Dimensions: 6000 x 2870 x 2340 mm,
Motor power : 55 kW,
Weight: 42 tons.
Boltmaker cold heading machine designed for the manufacture of bolts, studs and other products from calibrated wire with diameters of 10-19 mm (thread diameters M10-M18). The machine combines the operations of upsetting, chamfering, thread rolling, and one finished product is obtained in one stroke of the slider. In good technical condition.
A reverse ejection system is also available, allowing the production of complex multi-stage products.
 
  3
IDNA30029
MakeSACMA
ModelSP250
YOM1995
ConditionGood Condition
PhotoSee Photo
Diameter range : 10,5 mm,
Number of dies : 4,
Number of stations : 5,
Cutting length : 85 mm,
Shaft length under head : 65 mm,
Output - pieces/min : 275,
Press power : 65 tons,
Weight : 8.2 tons,
Motor power : 40 PS.
4 die - 4 blow transfer header (second-hand).
 
  4
IDNA29905
MakeSACMA
ModelSP25
YOM1977
ConditionGood Condition
PhotoSee Photo
Range of diameter : 6-12 mm,
Number of dies : 4,
Number of stations : 5,
Cutting length : 130 mm,
Shaft length under head : 100 mm,
Output- pieces/min : 90-125,
Weight : 13 tons.
4 die - 4 blow transfer header (second-hand).
Equipped with: Bushing Cutoff, PKO and Straight Across Transfer with Finger Opening Cam.
 
  5
IDNA29902
MakeNakashimada
ModelTH48A
YOM1992
ConditionGood Condition
PhotoSee Photo
4 Die Progressive Cold Header
Cutoff Diameter High Tensile : 8 mm,
Shank Length :12 - 75 mm,
Cutoff Length : 100 mm,
PKO Stroke :25 mm,
Pieces per Minute : 70-190,
DC Motor and Controls
Weight 29,000 Lbs.
Equipped with: Bushing Cutoff, PKO 1-4, IFO Transfer, Air Clutch and 2 Plane Straightener.
 
  6
IDNA29901
MakeNakashimada
ModelTH48A
YOM
ConditionGood Condition
PhotoSee Photo
4 Die Progressive Cold Header
Cutoff Diameter High Tensile : 8 mm,
Shank Length :12 - 75 mm,
Cutoff Length : 100 mm,
PKO Stroke :25 mm,
Pieces per Minute : 70-190,
DC Motor and Controls
Weight 30,000 Lbs.
Equipped with: Bushing Cutoff, PKO 1-4, IFO Transfer, Air Clutch and 2 Plane Straightener ,extra
feed rolls
 
  7
IDNA29891
MakePeltzer & Ehlers
ModelDKP16
YOM1972
ConditionGood Condition
PhotoSee Photo
Double blow header
Diameter range: 18 mm,
Shaft length under head : 180 mm,
Max. cut-off length : 220 mm,
Output - pieces/min : 70,
Weight : 23000 KG,
Measurements: 595 x 223 x 210 mm,
Motor power : 37 KW.
 
  8
IDNA29890
MakeNational,USA
ModelM20LS
YOM1970
ConditionGood working condition
PhotoSee Photo  |  See Video
Double blow header
Bushing cut-off
Diameter range : 10-20 mm,
Shaft length under head:150 mm,
Cutting length : 200 mm,
Output - pieces/min : 80,
Press power : 190 tons,
Motor power : 55 kW.
 
  9
IDNA28231
MakeChun Zu
ModelCH20S
YOM1997
ConditionGood Condition
PhotoSee Photo
Double blow header,
Diameter range : 20 mm,
Shaft length under head :150 mm,
Max. cutting length : 195 mm
Output- piece/min : 67/80,
Press power : 250 ton,
Weight : 17500 kg,
Motor power : 40 PS.
 
  10
IDNA28228
MakeHilgeland
ModelCH6V
YOM1972
ConditionGood Condition
PhotoSee Photo  |  See Video
Double blow header,
Diameter range : 10-20 mm,
Shaft length under head : 180 mm,
Cutting length : 230 mm,
Output - pieces/min : 45/50/56,
Press power : 160 ton,
Plane of stroke : 240 mm,
Weight : 25 tons,
Motor power : 55 kW,
measurements : 5750 x 2570 x 1780 mm.
 
  11
IDNA27864
MakeHilgeland
ModelCF5AZ
YOM1979
ConditionGood Condition
PhotoSee Photo  |  See Video
Diameter range : 16 mm,
Number of dies : 2,
Number of stations : 4,
Output-pieces/min : 100,
Shaft length under head : 130 mm,
Cutting length : 160 mm,
Weight : 23.3 tons,
Motor power : 50 KW.
 
  12
IDNA27246
MakeWaterbury Farrel
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
2 Die 4 Blow Transfer Header
Max. wire diameter : 12.7 mm,
Max. cutoff length : 140 mm,
max. transfer length : 92.5 mm,
70 PPM,
20 HP,
Overall dimensions : 3300 x 2425 x 1800 mm,
Equipped with :
Controls mounted,
Stand alone electrical cabinet,
20 HP 3 phase 220/440 volt 1200 RPM,
51.2/25.6 AMPS
top