subscribe newsletter
Subscribe

Category : Forging Equipment

Sub-Category : Hammer Counterblow

Total Machines Found : 8

Select | Machine Details
 
  1
IDNA30705
MakeZTS
ModelUHG 4000
YOM1984
ConditionUnder power
PhotoSee Photo
Impact work: 400 000 Nm (40 tons),
Max. strokes per min. : 80,
Number of strokes per min. : 6,
Operating pressure Mpa: 07 + -0.5,
Ram depth: 2100 mm,
Stroke: min. 2x710 mm max. 2x840 mm,
Die height :250 min./mm,
Nominal line width: 1230 mm,
Projected output: kg / h 673,
Average daily power: 23.12,
Planned staff: 5,
Weight of machine: 227000 kg,
Weight of upper ram: 44 419 kg,
Weight of lower ram: 46 971 kg.
 
  2
IDNA30654
MakeBeche
ModelDGH40
YOM
ConditionGood working condition
PhotoSee Photo  |  See Video
Capacity : 40 tons,
Rated size: 40,000 kgs,
Ram stroke: 1400 mm,
Ram L-R: 3200 mm,
Ram F-B: 3000 mm,
Anvil L-R: 3000 mm,
Anvil F-B: 4800 mm,
Max. blow per minute: 40,
Between the guides in daylight: 1400 mm,
Floor space L-R: 3800 mm,
Floor space F-B: 2800 mm,
Hammer height above the floor: 5880 mm.
 
  3
IDNA30615
MakeBeche
ModelDG10H
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 10 tons,
Energy of blow: 10000 kg,
Stroke: 1000 mm,
Distance between columns: 800 mm,
Maximum number of blow per minute: 80,
Average number of blow per minute: 10,
Air consumption per blow: 1.6,
Compressor output in ebm initial volume per minute
with cold air operation: 16,
Power requirement of the compressor in HP at: 7 atm,
cold air: 105 PS,
Air collectors: 14 ebm,
Steam consumption in kg per blow at 7 atm, strongest blow: 0.85 kg,
Steam consumption in kg per minute: 8.5 kg,
Height: 4500 mm,
Weight: 50 ton.
 
  4
IDNA30237
MakeBeche
ModelDGH25
YOMRetrofitted
ConditionNew
PhotoSee Photo  |  See Video
Capacity : 25 tons,
Energy of blow: 25000 kgs,
Stroke : 1200 mm,
Distance between slides: 1070 mm,
Ram width: 1050 mm,
Ram length: 1500 mm,
Maximal number of strokes per minute: 80,
Average number of strokes per minute: 8,
Weight : 152 tons.
We will supply you with extra top and bottom ram for this hammer.
Full Retrofit.
But this hammer was restored to the UK strictly according to the manufacturer's standards. Hydraulic control system is included. A set of new original guides made of special hard steel from Beche is included.
There are two spare rams & two sets of belts & shock absorbers included.
A complete set of technical documentation is available with a hammer. Including a drawing of the foundation, which will facilitate installation in a new location.
 
  5
IDNA29785
MakeDicep
ModelDHEK-40
YOM1985 Reconditioned 2015
ConditionGood working condition
PhotoSee Photo  |  See Video
Hydraulic Hammer
Capacity : 40 tons,
Impact energy : 400 kJ,
Distance between Upper and Lower Ram (max.) : 2400 mm,
(without tool)
Dimension of Lower Ram : 1700 x 2230 x 2100 mm,
Dimension of Upper Ram : 2310 x 2150 x 3500 mm,
Distance between slides (free opening) : 1280 mm,
Dimension of the connecting pipeline
(outside diameter and wall thickness)
at the inlet : 324/8 mm,
at the exhaust port : 324/8 mm,
at the control inlet : 34,2/3,2 mm,
Dimension of the machine
Height above ground level : 6800 mm,
Width : 2800 x 4840 mm,
Depth : 3600 mm,
Base plate : 3600 x 5300 mm,
Foundation pit : 13600 x 8700 mm,
Lower Ram weight : 47260 kg,
Upper Ram weight : 45170 Kg.
 
  6
IDNA26448
MakeDigep,Hungary
ModelEK32
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 32 tons,
Percussive energy : 32000 mkg,
Number of strokes per minute : 50 min-1,
Total stroke of both rams : 1300 mm,
Die height minimum : 600 mm,
Ram weight upper ram : 26500 kg,
Ram weight lower ram : 30000 kg,
Ram front to back : 1730 mm,
Distance between guides : 1145 mm,
Die length : 2400 mm,
Dimensions (W x D x H) : 4710 x 3100 x 7870 mm,
Height of machine above floor : 5900 mm,
Total Weight of machine : 180 ton.
 
  7
IDNA26447
MakeDigep,Hungary
ModelEK25
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 25 tons,
Percussive energy : 25000 mkg,
Number of strokes per minute : 80 min-1,
Total stroke of both rams : 1200 mm,
Die height minimum : 560 mm,
Ram weight upper ram : 25000 kg,
Ram weight lower ram : 26500 kg,
Ram front to back : 2000 mm,
Distance between guides : 1050 mm,
Die length : 2400 mm,
Dimensions W x D x H : 4000 x 3660 x 7650 mm,
Height of machine above floor : 5850 mm,
Total Weight of machine : 155 tons.
 
  8
IDNA6581
MakeBeche
ModelDG6
YOM
ConditionGood Condition
PhotoSee Photo
Blow energy : 6000 mkg,
Total stroke of both rams : 900 mm,
Stroke rate : 60 min^-1,
Die height : 300 mm,
Ram (front to back) : 1060 mm,
Height of machine above floor : 3750 mm,
Total weight : 30 tons.
top