Hammer Forging Pneumatic MPM1600
Specifications
Manufacturer | Huta Zygmunt, Polish |
Model | MPM1600 |
Condition | Used |
Stock Number | MA0410 |
Item condition | Good condition |
Capacity tons | 0.75 |
Description
Capacity : 0.75 tons.
Energy of blow : 18.4 KJ,
Weight of falling part (without die) : 690 kg,
Max weight of upper die : 200 kg,
Weight of anvil block without die holder : 12.5 tons,
Weight of hammer with anvil block : 22 tons,
Approximate forging weight : 0.5-1 kg,
Average steam consumption : 380 kg/h,
Average air consumption cold : 10 m3/min,
Average air consumption hot : 7 m3/min,
Number of blows per minute : 120 1/min,
Overall dimensions :
Length of hammer : 2100 mm,
Width of hammer : 1185 mm,
Total height of hammer : 3850 mm,
Height of hammer : 3440 mm,
Min height of die partition above floor : 800 mm,
Min height of the die (without tail) : 180 mm,
Guidway spacing : 418 mm,
Length of the die seat in the tup : 400 mm,
Length of the seat in the die holder : 600 mm,
Max width of working area : 450 mm,
Max tup stroke : 750 mm.