Press Forging Open Die Hydraulic HBE

Price

orCall +919920651051

Manufacturer	HBE
Model	30MN/35MN
Year	2011
Condition	New
Stock Number	MA1790
Item condition	Never used, working condition, Refurbishment
Capacity tons	3500

Four Column Push Down Open Die Forging Press

Capacity : 3500 tons,

Nominal forging cogging force (static working pressure of 320 bar) : 30 MN (3000 tons),

Upsetting force (static working pressure of 350 bar) : 35 MN (3500 tons),

Maximum press stroke : 2500 mm,

Press daylight : 3300 mm

Distance between column ( inside width) : 2680 mm × 1460 mm,

Number of pull back cylinders : 2,

Forging tolerance measures on hot workpiece : ±1 mm,

Die Table area (width × length × stroke) : 2000 mm × 4000 mm × 3000 mm,

Weight approx. : 550 tons.

Press speeds -

Forging speed at 30 MN : 1-80 mm/sec,

Upsetting speed at 35 MN : 1-40 mm/sec,

Advance speed. Fast/slow : 1-300 mm/sec / 10mm/sec,

Return speed. Fast/slow : 1-300 mm/sec / 10mm/sec,

Die table slide forward Fast / slow : 1-250 mm/sec / 5mm/se,

Press forces :

- Forging at 320 bar : 30 MN (3000 tons),

- Upsetting at 350 bar : 35 MN (3500 tons),

- Return at 320 bar : 3.0 MN (300 tons),

- Table shift at 250 bar : 0.94 MN (94 tons) ,

Hydraulic pumps : 8 sets × Axial piston pump, Oilgear Pressure rate 400 bar, Working pressure 350 bar,

Electric motors :

4 sets × main motors : 500 kw, 3300 volt,1200 rpm. double end shaft

2 sets × boost motor : 90 kw, 440 volt,1800 rpm,

1 set × pilot pump : 60 kw, 440 volt,1800 rpm,

1 set × cooling and filtering motor : 150 kw, 440 volt, 3600 rpm,

1 set × Auxiliary motor : 1 set × Auxiliary motor,

PLC control system and HMI : PLC Allen-Bradley.

Modernization of hydraulic, electrical system

Fully Refurbishment 2021.

Press was manufactured and installed in 2011.

Provide complete electric and hydraulic drawing.

Included Supply Part