subscribe newsletter
Subscribe

Category : Turning Machines

Sub-Category : Lathe Vertical Turning CNC

Total Machines Found : 44

Select | Machine Details
 
  1
IDNA30906
MakeOM
ModelTMD-30/45
YOM1982
ConditionGood Condition
PhotoSee Photo
OM Double Column CNC Vertical Lathe Model TMD-30/45 RH55D-NC
Table Diameter : 3,000 mm,
Max Diameter of Workpiece : 4,500 mm,
Max height of Workpiece : 2,500 mm,
Max weight of Workpiece : 30 Ton,
Table Speed : 0.45 ~ 30 RPM,
Cross Rail from bottom line to the surface of table : Max 2800 / Min1,200 mm,
Tool Post travel , Up and Down ( Right side ) : 1500 mm,
Tool Post Travel , From Left to Right ( Right side ) : 2615 mm,
Tool Post travel , Up and Down ( Left side ) : 1100 mm,
Tool Post Travel , From Left to Right ( Left side ) : 2275 mm,
Main Motor : DC55KW,
Machine Dimension ( W x L x H ) : 13,000 x 7,000 x 7,905 mm,
CNC Controller : Fanuc 21TB.
 
  2
IDNA30899
MakeOM
ModelTMS 30/70
YOM1978 Retrofitted By NC 2018
ConditionGood Condition
PhotoSee Photo
OM Single Column NC vertical Lathe Model TMS 30/70
Table : 3000 mm,
Swing : 7000 mm ,
Height : 3500 mm ,
Ram Stroke -1500 mm,
Controller : Fanuc 0iT , DC Servo Main Motor ( 150HP ).
 
  3
IDNA30898
MakeRafamet Polish
Model
YOM
ConditionGood Condition
PhotoSee Photo
Rafamet NC Vertical Lathe ( Double Column ) 32/40
Table : 3200 mm,
Swing : 4000 mm,
Height : 2000 mm,
Ram Stroke -800 mm,
Controller : Fanuc 21T ,
Fanuc AC Servo Main Motor ( 45HP ).
 
  4
IDNA30882
MakeHankook
Model
YOM2013
ConditionGood Condition
PhotoSee Photo
System: Fanuc 31i-MB
Max. swing: 12,000 mm
Max. turning diameter: 12000mm
Max. turning height: 6000mm
Max load: 400ton
(Table)
Table diameter: 9,000 mm
Max. cutting force: 16000 kg
Max. torque:1,200,000 N.m
Table speed 0.6 - 16 rpm(High)/ 0.2~4.2(Low)
Number of table speed range: Auto 2 stages
(Ram head)
Number of tool: 1
Tool size: 50 x50
Section dimension of square ram: 500 x 500 mm,
(Travel and feed)
X-axis traverse(ram vertical): 3000 mm,
Z-axis traverse(saddle cross): 6915 mm,
X-axis traverse(cross rail vertical ): 4500 mm,
X-axis: Max. 6000mm/min,
Z-axis: Max. 6000mm/min,
X-axis rapid : 6000mm/min,
Z-axis rapid : 6000mm/min,
W-axis rapid : 1000mm/min,
(Motor)
Table motor: AC 100kW X 2units,
X-axis servo motor: AC 16kW,
Z-axis servo motor: AC 14kW,
W-axis servo motor: AC 14kW x 2unis,
Hydraulic pump motor: 30kW,
Hydraulic cooling device:1.45kW,
Hydrostatic oil cooling device:30kW,
Guide way lube pump motor:75kW /75kW,
High pressure coolant pump motor:3kW,
High pressure coolant feed pump motor:0.9W,
Chip conveyor motor: 1.5kW,
(Dimensions)
17,000mm(W) x14,000mm(L) x 17,500mm(H),
Machine weight: Approx. 600ton.
 
  5
IDNA30868
MakeWMW Niles ,Germany
Model
YOM
ConditionGood working condition
PhotoSee Photo
Table : 3500 mm,
Swing : 4000 mm,
CNC Controller : Sentrol 2 ( Korean made ).
 
  6
IDNA30849
MakeHankook
ModelVTC-50/60Y
YOMNew 2010
ConditionExcellent condition,under power
PhotoSee Photo
Table : 5,000 mm,
Swing : 6,000 mm,
Height : 4,500 mm,
Max loading on table ; 100 Ton
Table indexing : 1/1,000 degree
Fanuc 31i-A,
60 ATC
 
  7
IDNA30848
MakeHankook
ModelVTB 4555E
YOMNew 2011
ConditionGood working condition
PhotoSee Photo
Table size :4,500 mm ,
Swing : 5,500 mm,
Height : 4,000 mm,
Loading capacity : 60 ton,
RPM : 1-60
CNC Controller : Fanuc 31i Ta with 12 A.T.C.
 
  8
IDNA30822
MakeHankook
ModelVTC-110R
YOM2014
ConditionExcellent
PhotoSee Photo
CNC Vertical Lathe with C Axis ( Turn Mill )
Max Swing on Bed : 1250 mm,
Max Workpiece Swing : 1100 mm,
Max Workpiece Height : 850 mm,
Chuck Size : 800 mm ( 32 ),
Spindle speed : 10 ~ 800 Rpm,
Main Motor : 45/55kw,
12 A.T.C
Table Indexing Degree : 2.5 Degree,
Rapid feed : X,Z 12m/min,
Spindle Torque : 512 kgf.m,
With Scale & Chip conveyor,.
CNC Controller : Fanuc -0i TD
 
  9
IDNA30776
MakeKolomna Russia
Model1563
YOM1983 Retrofit 2012
Conditionexcellent working condition
PhotoSee Photo  |  See Video
Table diameter : 6300 mm,
Swing : 6300 mm,
Height of workpiece : 3200 mm,
Course of vertical supports sliders : 2000 mm,
Corner of supports turn : - 15 and +30,
Weight of the product workpiece on a faceplate : 160 tons,
Effort of cutting to a right support : 100 kH,
Effort of cutting to the left support : 80 kH,
Max. total effort of cutting by two supports : 160 kH,
Limits of vertical and horizontal feeding : 0,0352 - 285 mm/min
Table speed : 0,28 - 25,5 rpm,
Total weight of Machine : Approx 223 tons,
Remark :
1. Right Tool head Controlled by CNC Fanuc 0 T.
2. Left Tool head Controlled by Conventional Type.
 
  10
IDNA30732
MakeBerthiez France
Model8920
YOM2011
ConditionGood Condition
PhotoSee Photo
Max. swing : 6000 mm,
Max. height : 1500 mm,
Workpiece weight : 35 tons,
CNC complete
 
  11
IDNA30731
MakeTos
ModelSKJ20A
YOM2007
ConditionGood Condition
PhotoSee Photo
CNC Sinumerik
Table dia. : 2000 mm,
Max turning diameter : 2300 mm,
Max. turning height : 1500 mm,
Max. workpiece weight : 15 tons,
Machine weight : 32.6 tons.
 
  12
IDNI6596
MakeTaitan,Germany
ModelTVL2500 / 3200
YOM2008
ConditionExcellent
PhotoSee Photo
Titan CNC VTL (Original CNC VTL)
Chuck dia : 2500 mm,
Swing dia : 3200 mm,
Height : 2600 mm,
With:
ATC : 16
Fanuc 21iTB Control.
Excellent condition. Machine like New,
Used only for 950 Hours, Cutting Hours : 250.
 
  13
IDNI6595
MakeYushine
ModelVL1200ATC
YOM2011
ConditionGood working condition
PhotoSee Photo  |  See Video
Table Size : 1250 mm,
Table Load : 5000 kgs,
Maximum Swing Diameter : 1600 mm,
Turning dia. 1450 mm
Maximum Turning Height : 1250 mm,
X, Axis Travel : 1475 mm,
Z, Axis Travel : 900 mm,
Vertical Travel of Crossrail : 800 mm,
X, Axis Rapid Feed Rate : 1200 mm per minute,
Z, Axis Rapid Feed Rate : 1000 mm per minute,
Cutting Feed Rate : 0.01-50 mm/rev,
Manual Feed Rate : 0-1260 mm/ per minute,
Turrent (ATC) Type 12 station,
Type of Tool Shank : BT 50,
Max. Tool Weight : 50 kg,
Max. Loading of ATC : 360 kg,
Tool Changer Time : 30 sec,
Input 400/ 3 / 50 hz 160 amps 80 kw,
Fitted with 4 jaw manual chuck, coolant, chip conveyor
Length : 4100 mm,
Width : 3600 mm,
Height : 4000 mm,
Nett Weight Actual. : 33000 kgs,
Control Fanuc series O i-TD.
Worked 2500-3000 hours
 
  14
IDNA30631
MakeRussian
Model1A516MF3
YOM1988
ConditionGood Condition
PhotoSee Photo
Turning dia : 1600 mm,
Height : 1250 mm,
Faceplate dia : 1400 mm,
Max. mass of workpiece : 15 tons,
Max. height of cutting tool section : 50 mm,
Max. stroke of carriage slide : 800 mm,
No. of tools nests in the magazine : 10,
Faceplate speed (stepless control) : 0.8-278 RPM,
Carriage working feed on each axis:(stepless control): 0.01-100 mm/rev,
Max. rate of carriage positioning traverse : 6000 mm/min.,
Max. cutting force : 5 tons,
Max. faceplate torque : 35 kN-m,
Power of main drive : 55 kW,
Sound level at operators position : 80 dB,
Discreteness of point to point traverse : 0.001 mm,
Weight : 27 tons.
 
  15
IDNA30562
MakeSkoda Czech
ModelSK50
YOM
ConditionGood Condition
PhotoSee Photo
CNC Double Columns Vertical Lathe
Table dia : 4800 mm,
Swing dia : 5200 mm,
Height : 4000 mm,
One tool post is CNC controlled by Sentrol,
One tool post controlled by conventional.
The machine will be done , repainting , cleaning & installation for inspection under power in Korea
in case of signing contract & down payment .
 
  16
IDNA30558
MakeSchiess,German
Model
YOM2008 retrofited
ConditionGood Condition
PhotoSee Photo
CNC Double Columns VTL
Table dia : 5420 mm,
Max. Swing dia : 6540 mm,
Turning height : 3500 mm / can be more!,
With CNC control Fagor.
 
  17
IDNA30555
MakeDSK Korea
ModelDVBM7085
YOM2014
ConditionGood working condition
PhotoSee Photo  |  See Video
Table dia: 7000 mm,
Max. swing: 8500 mm,
Turn height : 6000 mm,
Stroke (X/Z/W): 4,350/3,000/4,500 mm,
Table turning speed: 0.2 ~ 30 RPM,
Drive power: 200 Kw,
Table load cap: 300 tons,
Milling spindle speed: 1 ~ 1,500 RPM,
Tool taper: ISO 50,
CNC Control: Siemens 840D.
Attachment : Universal & Extension head ( 2 sets ),
Chip conveyor.
 
  18
IDNA30541
MakeOM Ltd
ModelTMS2 30/40
YOM1989
ConditionGood Condition
PhotoSee Photo
Table diameter : 2952.75 mm,
Maximum turning diameter w/spacer : 4999 mm,
Maximum turning diameter w/o spacer : 4572 mm,
Maximum turning diameter to center : 2999 mm,
Maximum turning height : 2501 mm,
Maximum height under rail : 2641 mm,
Table capacity : 16.5 ton,
Column in feed : 1000 mm,
Ram stroke : 1000 mm,
Vertical travel of cross rail : 1000 mm,
Horizontal travel of ram : 1651 mm,
Ram cross section : 209 x 209 mm,
Table speeds (2-speed inf.variable) : 1-80 rpm,
Feed rate of tool head : .0001-40 IPM,
Rapid traverse of tool head : 250 IPM
Machine footprint : 6654 x 5410 mm,
Machine height : 6985 mm,
Machine weight : 37.5 tons,
Equipped with:
Fanuc 15t cnc controls,
12-position automatic tool changer,
118" table w/ 4-top jaws,
Open side design with extended travel,
Hardened ways,
50 hp main motor.
 
  19
IDNI6582
MakeRafamet Bost
Model
YOM1991
ConditionExcellent
PhotoSee Photo
CNC Vertical Lathe Double
Chuck Facep late : 1300 mm,
Max. Swing dia : 1600 mm,
Max. Turning length : 500 mm,
Height under tool post : 630 mm,
Chuck Turing speed Gear I : 16 63 rpm,
Chuck Turing speed Gear II :50 200 rpm,
Ram size : 220 x 220 mm,
Tool change system : Hydraulic,
Tool changer for Each ram : 6 places,
Turret Position : 12 places,
X1 & X2 Servo motors : 45 Nm / 2000 rpm,
Z1 & Z2 Servo motors : 45 Nm / 2000 rpm,
Machine size :4500 x 3000 x 3500 mm,
Main motor :141 kW / 2600 rpm,
Machine weight : Approx 22 ton,
Control : Siemense 850 4-axis,
Quantity No. : 4.
Double column machines with 2x heavy ram for Heavy Machining,
Machines were used to turn Railway & Metro wheels,
The machine is in Excellent Mechanical condition,
With machine documentation,
With extra/spare main motor gearbox.
 
  20
IDNA30326
MakeRussian
Model1K540F4
YOM
ConditionGood Condition
PhotoSee Photo
Single Column VTL CNC
The diameter of the workpiece (max) : 8000
The height of the workpiece (max) : 2500; 3200; 4000 mm
Mass of workpiece (max), : 125 - 200 tons
Diameter of table faceplate : 4000 mm
Diameter range of products processed by vertical caliper :
- in the front position of the rack : 0 ... 4000 mm,
- in rear position of the rack : 4000 ... 8000 mm,
Diameter of the diameters of products processed by the side caliper :
- in front position of the rack : 1500 ... 4000 mm,
- in the rear position of the rack : 5500 ... 8000 mm,
Overall dimensions of the machine :
Length : 13000 mm,
Width : 7300 mm,
Height : 9600; 11000; 13000 mm,
Height above the floor level of 7500; 9000; 11000 mm,
Main drive power (not less) : 110 kW.
 
  21
IDNA30325
MakeTos
ModelSKJ20
YOMRetrofitted 1998
ConditionExcellent condition,under power
PhotoSee Photo
Table diameter : 2000 mm,
Max turning height : 1350 mm,
Max working diameter : 2300 mm,
Max weight on table : 20 tons,
Nr.02 CNC carriage,
Max table speed : 160 rpm,
CNC Siemens 810 T,
Tooling and accessories included.
 
  22
IDNA30315
MakeTitan Romania
ModelSC22
YOM
ConditionGood Condition
PhotoSee Photo
Spindle table diam.: 2000 mm,
Allowed payload on table: 20000 kg,
Swing over the bed: 2200 mm,
Max diam. of vertical carriage: 2200 mm,
Motor power: 55 Kw,
Moving cross-rail: .  moving cross-rail stroke: 1250 mm (vertical)  N.of carriage: 1,
RAM: square 250 x 250 mm,
RAM stroke: 1100 mm,
Control keyboard
Notes: total power 81 kW,
CNC: SIEMENS 840D.
 
  23
IDNA30314
MakeTitan Romania
ModelSC27
YOM
ConditionGood Condition
PhotoSee Photo
Spindle table diameter : 2500 mm,
Load on the table: 15000 kg,
Swing over bed: 2700 mm,
Vertical carriage max. diam.: 2700 mm,
Vertical carriage max height: 1900 mm,
Motor power: 60 kW,
Spindle speed: 124 - 112 rpm,
No. of carriage: 1,
Vertical carriage turret: autom. turret BARUFFALDI 4 positions
Control keyboard
Weight: 40000 kg,
Control : CNC: SIEMENS 802 D,
 
  24
IDNA30297
MakeTitan Onsal
ModelSC22
YOM2007
ConditionGood working condition
PhotoSee Photo
Control system : Siemens 840.D
Plate diameter : 2000 mm,
Max. diameter of the work-piece : 2150 mm,
Work-piece height : 1450 mm,
Plate rotation speed : 3-140 U/min,
Max. weight of work piece : 12 tons,
Milling spindle :
Maximum speed : 2000 rpm,
Power milling spindle motor : 22 kW,
Total weight of the machine : 34 tons
Machine complete with :
C-axis : 360.000
Milling spindle : 22 KW
Tool changer : 16 positions
Tool changer for milling tools ISO 50 : 16 positions
Complete fairing
Chip conveyor
Complete cooling system with filtration
4 grips on the plate to manual clamping
 
  25
IDNA30295
MakeCarnaghi
ModelAC20
YOMretrofitted in 2006/2015
ConditionGood working condition
PhotoSee Photo
Control system : Siemens 840 D
Table diameter : 2000 mm,
Max diameter of the work-piece : 2500 mm,
Main drive : 74KW,
Table rotation speed : 2,8 162 rpm,
Work-piece high under the cross beam : 2500 mm,
Vertical travel of the RAM : 1750 mm,
Horizontal travel of the RAM : 1525 mm,
Tool magazine : 12 seats,
Machine weight : 35 tons,
Accessories :
Grinding attachment turning at : 3000 rpm,
wheel dia. : 250 mm,
Chip conveyor and safety guards, many tool holders.
 
  26
IDNA30292
MakeBerthiez France
ModelBMF200
YOMRetrofitted 2007
ConditionGood Condition
PhotoSee Photo
Type : Double tool holder
Chuck diameter : 2000 mm,
Max. Turning diameter : 2200 mm,
Max. Turning height : 2000 mm,
Tool holders
Right carriage
Automatic turn square turret with interchangeable holders - 4 positions,
Tool holders included - 1,
Vertical travel (Z) : 1 000 mm,
Left carriage
Vertical travel (Z) : 1300 mm.
Chuck
2 Range max. : 80 rpm,
Main motor : 37 Kw,
Loading capacity : 20000 Kg,
Control : CNC FAGOR 8070.
 
  27
IDNA30289
MakeFMUA ,Italy
ModelSC2500
YOM1984
ConditionGood working condition
PhotoSee Photo
The machine is equipped with CNC ECS 1805 ITALY.
Main technical data :
Max. Turning Dia : 2650 mm,
Table Dia : 2500 mm,
Max. Table load : 15 tons,
Max. Admitted Work piece height : 1900 mm,
Main Motor Power : 60 KW,
Table speed range : 1-112 RPM,
Left-Hand head travel : 1200 mm,
Right-Hand head travel : 760 mm,
Cross rail vertical travel : 1600 mm,
Total machine weight : 40 tons.
 
  28
IDNA30238
MakeRussian
Model1516F1
YOM1986
ConditionGood working condition
PhotoSee Photo
Face plate diameter: 1400 mm,
Swing diameter: 1600 mm,
Turning height: 1000 mm,
Max. table loading : 8000 kg,
Dimensions : 319 x 3360 x 4100 mm,
Weight of machine: 19 tons.
 
  29
IDNA30205
MakeSedin Russia
Model1525F3
YOMReconditioned 2013
ConditionExcellent
PhotoSee Photo
Max. work piece diameter : 2500 mm,
Table diameter : 2250 mm,
Max. work piece height : 1600 mm,
Max. work piece weight : 16000 kg,
Table speed range: 1,6...80 rpm
Supports : pcs 2
Movement of vertical support, mm:
Vertical : 1200 mm,
Horizontal : 1390 mm,
Movement speed of vertical support : 5...1800 mm/min,
Max. swivel angle of support's slider : 30 degrees,
Main motor power : 45 kW.
 
  30
IDNA30185
MakeTos Czech
ModelSKJ10B
YOM1983
ConditionGood working condition
PhotoSee Photo
The maximum size of the turning transverse caliper : 1150 mm,
The maximum size of the turning side slide : 1000 mm,
The maximum height : 900 mm,
The maximum weight details : 3 tons,
Diameter face plate - 1000 mm,
Turn face plate : 2.5 - 300 per minute
Power motor : 30 kWt,
Weight machine : 13 tons,
Qty : 2 Machines.
 
  31
IDNA30087
MakeTos Czech
ModelSKIQ8BCNC
YOM1989
ConditionGood condition dismantled
PhotoSee Photo  |  See Video
CNC TOS vertical lathe SKIQ8BCNC with Tesla NS642 :
Face plate diameter : 800 mm,
Max. workpiece diameter : 1000 mm,
Max. workpiece height : 750 mm,
Max. diameter of external working : 1000 mm,
Z axe : 630 mm,
Face plate revolutions : 1 5 500 rpm,
Main motor output : kW 30 (40),
Machine dimensions :
Length : 4900 mm,
Height : 3830 mm,
Width : 4485 mm,
Machine weight : 16 tons,
can supply one more electrical cabinet for spareparts.
the machine has spindle for the drilling and grinding.
 
  32
IDNA29956
MakeEchea
Model
YOM1987 Retrofitted in 2010
ConditionGood Condition
PhotoSee Photo
CNC Horizontal Lathe
Turning diameter on the bed: 1800 mm,
Distance between centers: 6000 mm,
Diameter over the carriages: 1540 mm,
Diameter face plate: 1200 mm,
Diameter outside face plate: 1500 mm,
Centre height: 900 mm,
Bed width: 1350 mm,
Max workpiece weight: 25/30 tons,
CNC: Siemens 840 D.
 
  33
IDNI6447
MakeGildemeister,Germany
ModelCTV-250
YOM2001
ConditionGood Condition
PhotoSee Photo
Swing diameter : 320 mm,
CNC Controller : Siemens Sinumerik 840d,
Turning speed range : 5000 rpm,
dimension approx : 5000 x 3900 x 2800 mm,
Chuck diameter : 250 mm,
Spindle bore : 79 mm,
X travel 800,
Z travel 300,
Feed rate x : 100 m/min,
Feed rate z : 45 m / min,
Main spindle with c axis,
Drive : 29 kw,
Pallet size : 160 x 65 mm,
Internal cooling : 25 bar 500 liter,
Weight approx : 7500 kg,
Full clamping cylinder smw sin 100,
12 tool live tool turret,
Tool adaptor : VDI 40,
Pallet work piece loading system ewab with 20 pallets,
Chip conveyor,
Oil mist unit : IFM 1000,
3 jaw chuck schunk rota NCW 225-71,
 
  34
IDNA29396
MakeSchiess,German
ModelNT130
YOM1988
ConditionGood Condition
PhotoSee Photo
Max orking diameter : 1700 mm,
Faceplate diameter : 1500 mm,
Max working height : 1500 mm.
 
  35
IDNA29384
MakeHankook
Model
YOMNew in 2011
ConditionGood Condition
PhotoSee Photo
table dia. :2500 mm,
Max. swing : 3000 mm,
Control system: Fanuc-31i,
Scale, tools measuring unit available,
ATC not available
 
  36
IDNA29294
MakeShibaura
ModelTMG-10750S
YOM
ConditionGood working condition
PhotoSee Photo
Table Diameter : 8000 mm,
Max. Swing : 10800 mm,
Max. Working Height : 4350 mm,
Max. Load : 250 tons ~ 300 tons,
Ram Size : 350 mm X 350 mm,
Ram Stroke : 2600 mm,
Main Motor Power : 75 KW [Two Main Motors Driving Simultaneously],
Control System : FANUC 18iTB,
X Axis : Hydrostatic Type,
Y Axis : Hydrostatic Type,
Table : Hydrostatic Type,
Boring :
Ram Size : 450 mm X 450 mm,
Ram Stroke : 1250 mm,
Y Axis Moving : 5000 mm [COLUMN MOVING],
C Axis [Table] Indexing : 0.001 DEG.
Control System :
Turning FANUC 18iTB,
Milling FANUC 18iMB,
Available:
Universal Head : One Unit,
Angle Head : Two Unit,
Extension Head : One Unit,
Grinding Head : One Unit.
Technical manuals available.
 
  37
IDNA29277
MakeWMW-VEB
ModelDKZ4000
YOM1967 Retrofit 2009
ConditionGood Condition
PhotoSee Photo
CNC-Control : Siemens 802 D,
Faceplate diameter : 3500 mm,
Max. Turning high : 2000 mm,
Max. Turning diameter : 4000 mm,
Ram : 2 pieces,
Ram travel : 1400 mm,
Max. Table load : 25 tons,
Speed Faceplate : 1 30 rpm,
Machine Weight : 66 tons,
Power : 63 kW,
Dimensions L/W/H : 13600 x 9800 x 6750 mm
Retrofit CNC 2009.
 
  38
IDNA28849
MakeFroriep
Model
YOMRetrofit in 2010
ConditionVery good condition,Under power
PhotoSee Photo
Table diameter : 1800 mm,
Maximum working diameter : 2000 mm,
Working height : 1250 mm,
Max ram stroke : 800 mm,
Max loading : 8000 kg,
Total power : 70 kW,
Weight of the machine : 20 tons,
CNC : Fagor 8050 TC.
 
  39
IDNA28791
MakeTitan Romania
ModelSC50
YOMNew in 87 / 2012
ConditionUnder power
PhotoSee Photo
Double Column
Faceplate diameter : 4000 mm,
Swing diameter : 5000 mm,
Turning height : 2200 mm,
Table turning speeds : 1.02 - 92 U/min,
Table load : 18 ton,
Travel Z-axis : 840 mm,
U-axis : 1160 mm,
1 turret - support - swivelable +/- : +/- 35
1 ram-support -swivelable +/- 35
Total power requirement : 60 kW,
Weight of the machine ca. : 70 ton,
dimensions of the machine ca. : 7.5 x 6.5 x 7 m.
 
  40
IDNA28790
MakeAccut
ModelVTL-63CNC
YOM2015
ConditionNew
PhotoSee Photo
CNC Double Column Vertical
Max. turning dia. : 6300 mm,
Max. turning height : 4000 mm,
Table size : 5700 mm,
Max. table load : 100 tons,
Max. spindle speed : 32 rpm,
Main motor power : 90 kW,
Number of ram(s) : 2,
CNC controller : Siemens 828D sl.
Technical manuals available
 
  41
IDNA28782
MakeOM,Japan
Model
YOMRetrofit in 2010
ConditionGood working condition
PhotoSee Photo
Single Column CNC VTL
Table Dia : 6000 mm,
Max. swing : 11000 mm (Column moving type),
Ram stroke : 2700 mm,
Main motor power : 160 HP,
Control system : Fanuc 16T.
 
  42
IDNI6332
MakeRafamet Polish
ModelKCF320
YOM
ConditionGood Condition
PhotoSee Photo
Table dia : 3200 mm,
Swing diameter : 3500 mm,
Axis stroke X axis : 2050 mm,
Axis stroke Z axis : 960 mm,
Spindle motor capacity : 75 kw (induction motor),
Control CNC : Siemens 802D,
Axis drives : SIMODRIVE 611U,
Spindle Drive : ABB,
Right head : CNC,
Left head : Manual,
Manual : Available.
 
  43
IDNI6325
MakeSchiess Cooper
Model800
YOM
ConditionGood Condition
PhotoSee Photo
Chuck Dia : 800 mm,
SWING : 1000 mm,
X : 1000 mm dia,
Z : 600 mm,
Height : 900 950 mm,
Chuck Speed : 0 - 200 RPM,
Chuck Speed commendable from CNC,
Turret 5 station with manual lock
Automatic lubrication
Chuck Power 15HP motor
Complete new wiring with elements /
switch gears.
Repeatability / Accuracy 0.010 mm,
CNC : Fanuc Oi Mate TD.
 
  44
IDNA28650
MakeSchiess,German
Model16DSC-125P
YOM1988
ConditionGood Condition
PhotoSee Photo
Face plate diameter: 1250 mm,
Diameter of processing: 1600 mm,
Length of processing: 1460 mm,
Work piece weight: 8000 kg,
Table length: 1250 mm,
Z axis travel: 1400 mm,
Control: Siemens CNC.
top