subscribe newsletter
Subscribe

Category : Turning Machines

Sub-Category : Lathe Vertical Turning

Total Machines Found : 102

Select | Machine Details
 
  1
IDNA30910
MakeStanko-Russia
Model1508
YOM1980
ConditionGood Condition
PhotoSee Photo
Max workpiece dia 800 mm,
Max workpiece height 800 mm,
Max workpiece weight 1600 mm,
Faceplate speeds range 10-500 rpm,
Main motor power 22 kW,
Overall dimensions 2270 x 2365 x 3210 mm,
Weight 9.5 tons.
 
  2
IDNA30875
MakeDimitrov,Bulgaria
ModelK5000
YOM
ConditionGood Condition
PhotoSee Photo
Max. swing with vertical tool holder : 5200 mm,
Max. swing with side tool holder : 5000 mm,
Table dia : 4750 mm, Max. Working height : 2500 (with vertical tool holder) & 3000 mm (with side tool holder),
Max. load on table : 40 Tons,
Max. torque : 2250.000 kg/cm,
Tool holder : 60 x 60 mm,
Table T slot width : 36 mm,
Travel of horizontal slide : 2750 mm,
Travel of side ram : 1400 mm,
Horizontal travel of side ram : 1250 mm,
Total Power : 145 kW,
Machine height 7430 mm,
Machine Weight : 103 tons.
 
  3
IDNA30874
MakeSedin Russia
Model1L532
YOM1984
ConditionGood Condition
PhotoSee Photo
Turning diameter : 3200 mm,
Face plate diameter : 2800 mm,
Turning Height : 1600 mm,
Work piece Weight : 16 tons,
Number of tool slides : 2,
Horizontal stroke of tool slide : 1720 mm,
Vertical stroke of tool slide : 1200 mm,
Cutting force : 67 KN,
Face plate speed : 1,25-63 RPM,
Main drive power : 55 kW,
Overall dimensions : 5485 x 6000 x 4910 mm,
Machine Weight : 43 tons.
 
  4
IDNA30872
MakeKolomna Russia
Model1550
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter of work piece : 5000 mm,
Max. height of work piece : 2500 mm,
Chuck diameter : 4500 mm,
Max. shift of vertical supports : 1600 mm,
Turn angle of vertical supports : -15 to +40 degrees,
Max weight of work piece : 63 tones,
Max. effort of cutting by two supports : 12500 kN,
Max. moment of cutting at chuck : 20 000 kNm,
Speed of chuck turning : 0.34 - 31.2 turn/minute,
Vertical and horizontal feed : 0.0435 - 352 mm/turn,
Main motor power: 125 kW,
Dimensions :
Height : 8400 mm,
Width : 11400 mm,
Length : 6600 mm,
Weight : 140 tons.
 
  5
IDNA30870
MakeTitan Romania
ModelSC2500
YOM1977
ConditionVery good condition
PhotoSee Photo
Max. turning dia : 2650 mm,
Table diameter : 2500 mm,
Max. table load : 15000 kg,
Max. admitted workpiece height : 1900 mm,
Main motor power : 60 kw,
Table speed range : 1-112 RPM
Left hand travel : 1200 mm,
Right hand travel : 760 mm,
Cross rail vertical travel : 1600 mm,
Total machine weight : 40000 KG.
 
  6
IDNA30869
MakeTos Hulin
ModelSKJ20A
YOM2001 modernization in 2007
ConditionGood Condition
PhotoSee Photo
Board diameter - 2000 mm,
max. turning diameter - 2300 mm,
max. board load - 15,000 kg,
CAPTO C6 tool clamping system
Right slide - 8 tools,
Left slide - 4 tools,
Electric motor power - 50kW,
Machine weight approx. 35,000 kg,
Siemens 840D system.
 
  7
IDNA30866
MakeStanko-Russia
ModelKY514F1
YOM1998
ConditionGood Condition
PhotoSee Photo
Table diameter : 4000 mm,
Maximum swing : 4200 mm,
Maximum height under rail :2750 mm,
Ram stroke : 1800 mm,
Table speeds : .37-34 rpm,
Table weight capacity : 220,450 lbs,
Electrics : 460/3/60 cycle,
Equipped with:
Full pendant controls with digital readouts
Allen bradley panel view 600 plc controls
4000 mm diameter table with 4-face plate jaws
Taper turning attachment
Tracer attachment
Manuals
125 hp table motor
 
  8
IDNI6614
MakeTitan Romania
ModelSC14CC
YOM1987
ConditionGood Condition
PhotoSee Photo
Max. turning diamete : 1400 mm;
Faceplate diameter : 1200 mm;
Max. height of workpiece under traverse : 1000 mm;
Max. weight of workpiece : 6000 kg;
Main motor power : 55 kW;
Table speed range : 5 - 250 rpm;
Working and rapid feed range : 0,05 - 5 mm/rot;
Max. travel of cross rail : 800 mm;
Max. travel for right support slide : 760 mm;
Max. travel of side head slide : 650 mm;
Weight : 16 tons,
Overall dimensions : (L x B x H) : 4060 x 4450 x 3900 mm,
Qty : 2 Nos.
 
  9
IDNI6613
MakeSedin Russia
Model1512
YOM1987
ConditionGood Condition
PhotoSee Photo
Table diameter : 1120 mm,
Max Work Piece :
Diameter : 1250 mm,
Height : 1000 mm,
Weight : 3200 kg,
Table Speeds range per 1 min : 5-250,
Tool Dimensions : 25 x 40,
Max horizontal travel of the vertical ram : 775 mm,
Max Vertical travel of the vertical ram : 700 mm,
Max horizontal travel of the horizontal ram : 630 mm,
Max vertical travel of the horizontal ram : 1000 mm,
Max turning angle of the vertical ram : 45 degree,
Cross Rail :
Travel : 600 mm,
Speed : 400 mm,
Main motor power : 30 kW,
Overall dimensions : 2750 X 2975 X 4100 mm,
Machine weight : 16.5 tons.
 
  10
IDNA30787
MakeKolomna Russia
Model1532
YOM1975
ConditionGood Condition
PhotoSee Photo
Max turning dia : 3200 mm,
Max working height : 1600 mm,
Max workpiece weight : 16 tons,
Table dia : 2800 mm
Table rpm : 1.25 ... 63 rpm,
Working feeds : 0.04 ... 16 mm per rev,
Main motor : 55 kW,
Dimensions : 5490 x 6540 x 5100 mm,
Weight of machine : 43 tons.
 
  11
IDNA30710
MakeTitan Romania
ModelSC27
YOM
ConditionGood Condition
PhotoSee Photo
Table : 2500 mm,
Swing : 2700 mm,
Max. work piece height : 1900 mm,
Max. work piece weight : 15 ton,
Main motor : 50 kW,
Table RPM : 1.24-112,
Weight : 38.85 ton.
 
  12
IDNA30663
MakeStanko-Russia
Model1M553
YOM
ConditionGood working condition
PhotoSee Photo
Table diameter: 2100 mm,
Boring diameter with turret head or vertical carriage : 150...1900 mm
Max.turning diameter with turret head or vertical carriage: 2300 mm
Max workpiece hight : 1300 mm
Max workpiece diameter : 2300 mm
Max workpiece weight : 10000 kg
Machine weight : 34000 kg
 
  13
IDNA30662
MakeKolomna Russia
Model1532T
YOM1992
ConditionExcellent ,unused
PhotoSee Photo
Max turning dia : 3200 mm,
Max working height : 1600 mm,
Max workpiece weight : 16000 kg,
Table dia : 2800 mm
Table rpm : 1.25 ... 63 rpm,
Working feeds : 0.04 ... 16 mm per rev,
Main motor : 55 kW,
Dimensions : 5490 x 6540 x 5100 mm,
Weight of machine : 43 tons.
 
  14
IDNA30633
MakeTos
ModelSKJ12
YOM
ConditionGood Condition
PhotoSee Photo
Chuck diameter : 1250 mm,
Max. workpiece diameter : 1400 mm,
Max. workpiece height : 1150 mm,
Max. turning height : 850 mm,
Dimensions : 2970 x 2770 x 4250 mm,
Main motor output : 40 kW,
Machine weight approx. : 13 ton.
 
  15
IDNA30614
MakeTos Czech
ModelSK25
YOM
ConditionGood Condition
PhotoSee Photo
Turning Diameter : 2500 mm,
Faceplate dia : 2400 mm,
Turning height : 1600 mm,
Max. work piece weight : 14 tons ,
Machine weight : 57 tons.
 
  16
IDNA30595
MakeSedin Russia
Model1L532
YOM1984
ConditionGood Condition
PhotoSee Photo
Turning diameter : 3200 mm,
Face plate diameter : 2800 mm,
Turning Height : 1600 mm,
Work piece Weight : 16 tons,
Cutting force : 67 KN,
Face plate speed : 1,25-63 RPM,
Main drive power : 55 kW,
Overall dimensions : 5485 x 6000 x 4910 mm,
Machine Weight : 43 tons.
 
  17
IDNA30569
MakeSedin Russia
Model1525
YOM
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter : 2500 mm,
Table diameter : 2250 mm,
Max. work piece height : 1600 mm,
Max. work piece weight : 16 tons,
Table speed range : 1,6...80 rpm
Supports : pcs 2
Movement of vertical support, mm:
Vertical : 1200 mm,
Horizontal : 1390 mm,
Movement speed of vertical support : 5...1800 mm/min,
Max. swivel angle of support's slider : 30 degrees,
Main motor power : 45 kW,
Machine weight : 35.5 tons.
 
  18
IDNA30565
MakeKolomna Russia
Model1540F1
YOM
ConditionGood Condition
PhotoSee Photo
Max.swing : 4000 mm,
Diameter of a faceplate : 4000 mm,
Max. height : 2000 mm,
Max. slider stroke : 1250 mm,
Weight of the work-piece on a faceplate : 50000 kg,
Right support cutting effort : 63 kN,
Left support cutting effort : 50 kN,
Table speeds : 0.52 - 49 rpm,
Feeding : 0,059 - 470 mm/min,
Rapid feeding: 2715 mm/min,
Capacity of the main drive : 63 kw,
Height above a level of a floor : 6000 mm,
Dimensions: 5900 x 10100 x 7200 mm,
Machine weight : 105 tons.
 
  19
IDNA30551
MakeSkoda Czech
ModelSK50
YOM1972
Conditionexcellent working condition
PhotoSee Photo  |  See Video
Table Diameter : 4750 mm,
Table Weight Capacity : 45 tons,
Table Motor, GE Variable Speed Drive : 80 kW,
Table Speeds (Inf. Variable) : 0.33 - 32.8 RPM,
Max Turning Diameter-Rams : 5180 mm,
Distance between the columns : 5200 mm,
Max Height Under Cross Rail : 3260 mm,
Max height under tool : 3050 mm,
Left Ram Vertical Travel : 1400 mm,
Left Ram Horizontal Travel :2960 mm,
Right Ram Vertical Travel : 1400 mm,
Right Ram Horizontal Travel : 2960 mm,
Vertical Ram Swivel : +/- 30 to 45 Degrees,
Feeds (15) : 0.005 - 11 mm/rev,
Dimensions:
Front to back : 8370 mm,
Left to right : 12600 mm,
Height : 9,890 mm,
Machine Weight : 134 tons.
Equipped with:
Two Swivelling Ram Heads
Side Head
2-Axis Newall DP7 Digital Readout System
Threading Attachment Inch/Metric
Electronic Tracer Conical Turning
Constant Surface Cutting Speed
Hydrostatic Table Bearings
Pendant Control
Chip conveyor.
 
  20
IDNA30542
MakeTos
ModelSK12
YOM
ConditionGood Condition
PhotoSee Photo
Table diameter : 1200 mm,
Max. machining diameter : 1400 mm,
Max. machining height : 1000 mm,
Workpiece weight : 4000 kg,
Machine weight : 16600 kg.
 
  21
IDNI6588
MakeCsepel,Hungary
Model1500
YOM
ConditionGood Condition
PhotoSee Photo
Chuck Dia: 1300 mm,
Swing: 1500 mm,
Height: 1000 mm,
Vertical Two Ram.
 
  22
IDNA30517
MakeSedin Russia
Model1L532
YOM1979
ConditionGood Condition
PhotoSee Photo
Turning diameter : 3200 mm,
Face plate diameter : 2800 mm,
Turning Height : 1600 mm,
Work piece Weight : 16 tons,
Cutting force : 67 KN,
Face plate speed : 1,25-63 RPM,
Main drive power : 55 kW,
Overall dimensions : 5485 x 6000 x 4910 mm,
Machine weight : 43 tons
 
  23
IDNA30490
MakeSedin Russia
Model1512
YOM1977
ConditionGood Condition
PhotoSee Photo
Conventional Vertical Turning Lathe
Max turning diameter : 1250 mm,
Face Plate Diameter: 1120 mm,
Vertical Height: 1000 mm,
Dimensions : 3000 X 3500 X 400 mm,
work piece weight : 6300 kg,
Face plate speed from - to : 31,5 - 250 U/min,
Total power requirement : 30 kW,
Machine Weight - 16 tons.
 
  24
IDNA30469
MakeSedin Russia
Model1525
YOM1970
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter : 2500 mm,
Table diameter : 2250 mm,
Max. work piece height : 1600 mm,
Max. work piece weight : 16 tons,
Table speed range : 1,6...80 rpm
Supports : pcs 2
Movement of vertical support, mm:
Vertical : 1200 mm,
Horizontal : 1390 mm,
Movement speed of vertical support : 5...1800 mm/min,
Max. swivel angle of support's slider : 30 degrees,
Main motor power : 45 kW,
Machine weight : 35.5 tons.
 
  25
IDNA30435
MakeSchiess,German
ModelKE125
YOM
ConditionGood Condition
PhotoSee Photo
Conventional
Faceplate diameter : 1250 mm,
DIMENSIONS / WEIGHTS
Space requirements -left/right : 2850 mm,
Space requirements -front/back : 2700 mm,
Total height : 3100 mm,
Total weight approx. : 16 ton.
 
  26
IDNA30429
MakeKolomna Russia
Model1550
YOM
ConditionGood working condition
PhotoSee Photo
Max. diameter of work piece : 5000 mm,
Max. height of work piece : 2500 mm,
Chuck diameter : 4500 mm,
Max. shift of vertical supports : 1600 mm,
Turn angle of vertical supports : -15 to +40 degrees,
Max weight of work piece : 63 tones,
Max. effort of cutting by two supports : 12500 kN,
Max. moment of cutting at chuck : 20 000 kNm,
Speed of chuck turning : 0.34 - 31.2 turn/minute,
Vertical and horizontal feed : 0.0435 - 352 mm/turn,
Main motor power: 125 kW,
Dimensions :
Height : 8400 mm,
Width : 11400 mm,
Length : 6600 mm,
Weight : 140 tons.
 
  27
IDNA30416
MakeKolomna Russia
Model1550
YOM1974
ConditionGood Condition
PhotoSee Photo  |  See Video
Max. diameter of work piece : 5000 mm,
Max. height of work piece : 2500 mm,
Chuck diameter : 4500 mm,
Max. shift of vertical supports : 1600 mm,
Turn angle of vertical supports : -15 to +40 degrees,
Max weight of work piece : 63 tones,
Max. effort of cutting by two supports : 12500 kN,
Max. moment of cutting at chuck : 20 000 kNm,
Speed of chuck turning : 0.34 - 31.2 turn/minute,
Vertical and horizontal feed : 0.0435 - 352 mm/turn,
Main motor power: 125 kW,
Dimensions :
Height : 8400 mm,
Width : 11400 mm,
Length : 6600 mm,
Weight : 140 tons.
Machine weight : 140500 kg.
 
  28
IDNA30415
MakeKolomna Russia
ModelKU64
YOM1974
ConditionGood working condition
PhotoSee Photo  |  See Video
Table Diameter : 6300 mm,
Column to Column : 6300 mm,
Height from table to cross rail : 3690 mm,
Height from table to tool holder : 3550 mm,
Machine Weight : 223 Tons.
Max work load : 125 Tons,
Max work Height : 4000 mm,
Max work diameter : 6300 mm,
Ram Stroke : 2000 mm,
Min work hole diameter : 400 mm,
Ram size : 310 mm X 350 mm,
Ram angle [inner/outer] : 30/15 deg,
Table rotation speed : 4 X stepless 0.3 TO 25 RPM,
Cutting feed speed [X-axis] : stepless : 0.04 TO 285 mm/min,
Cutting feed speed [Z-axis] : stepless : 0.04 TO 285 mm/min,
High speed feeder [X-axis] : 2400 mm/min,
High speed feeder [Z-axis] : 2400 mm/min,
Machine Size : 14200 X 8200 X 9800 mm,
Machine gross wight : 223 tons.
 
  29
IDNA30412
MakeKolomna Russia
Model1580
YOM1967
ConditionGood working condition
PhotoSee Photo
Max. work piece dia. : 8000 mm,
Max. work piece height : 3200 mm,
Faceplate dia. : 7100,
Max. travel of the runners of the vertical supports : 2000,
Max. angular displacement of the supports, degrees 15 + 30,
Max. work piece weight, tons : 125,
Max. cutting effort at the right support : 10000 kgs,
Max. cutting effort at the left support : 8000 kgs,
Max. total cutting effort by the two supports : 16000 kgs,
Max. torque at the faceplate : 40000 kgm,
RPM of the faceplate : 0,22-18,3,
Limits of the vertical and horizontal feeds : 0,0352-285 mm/min,
The power of the main drive : 132 kW,
The machine weight : 250 tons.
 
  30
IDNA30402
MakeKolomna Russia
ModelKU514F1
YOM1986
ConditionGood Condition
PhotoSee Photo
Faceplate dia : 4000 mm,
Max work piece size : diameter 4000 mm,
Height : 2500 mm,
Max work piece weight : 100 tons,
Max Upper left ram vertical stroke : 1600 mm,
Max Upper right ram vertical stroke : 1600 mm,
Faceplate speed range : 0,37-34 rpm (stepless),
Range of work feeds of support on each axis : 0,043-352 mm/rev. (stepless),
Power of main motor: 118 kW,
Overall dimensions : 6100(L) x 10400(W) x 6920(H above floor)mm,
Machine weight : 134.2 kg.
 
  31
IDNA30401
MakeStanko-sedin
Model1516
YOM2002
ConditionGood Condition
PhotoSee Photo
VTL Stanko KS-701 (analog 1516)
Control : conventional,
Main technical data : Max turning diameter : 1600 mm,
Max turning height : 700 mm,
Max height of work piece: 1000 mm,
Table diameter : 1400 mm,
Max table loading : 6300 kg,
Table speeds : 4 - 200 rpm,
Dimensions (L x B x H) : 3170 x 3030 x 4100 mm,
Weight : ca 20 ton.
 
  32
IDNA30342
MakeTitan Romania
ModelSC22
YOM1979
ConditionGood Condition
PhotoSee Photo
Max. machining dia. : 2200 mm,
Turning dia. : 2000 mm,
Max. machining height : 1500 mm,
Workpiece weight : 12 tons,
Main motor : 55 kW,
Plate speed : 1 - 140 rpm,
Machine weight : 33 tons.
 
  33
IDNA30339
MakeSedin Russia
Model1525
YOM
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter : 2500 mm,
Table diameter : 2250 mm,
Max. work piece height : 1600 mm,
Max. work piece weight : 16000 kg,
Table speed range: 1,6...80 rpm
Supports : pcs 2
Movement of vertical support, mm:
Vertical : 1200 mm,
Horizontal : 1390 mm,
Movement speed of vertical support : 5...1800 mm/min,
Max. swivel angle of support's slider : 30 degrees,
Main motor power : 45 kW,
Machine weight : 35.5 tons.
 
  34
IDNA30328
MakeKolomna Russia
Model1580
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Turning diameter - 8000 mm,
Faceplate dia. - 7100 mm,
Turning height - 3200 mm,
Max. work piece weight - 125 tons,
Machine weight - 248 tons.
 
  35
IDNA30327
MakeKolomna Russia
Model1580
YOM
ConditionGood Condition
PhotoSee Photo
Turning diameter - 8000 mm,
Faceplate dia. - 7100 mm,
Turning height - 3200 mm,
Max. work piece weight - 125 tons,
Machine weight - 248 tons.
 
  36
IDNA30318
MakeRafamet Polish
ModelKCF200
YOM
ConditionVery good condition
PhotoSee Photo
Spindle table diameter: 2000 mm,
Swing over bed: 2230 mm,
Max height vertical carriage: 1850 mm,
Motor power: 40 Kw,
Spindle speed: 2-100 rpm,
No. of carriage: 2,
Vertical carriage turret,
II vertical carriage turret,
RAM stroke: 1250 mm,
Control keyboards,
Weight: around 50 ton.
 
  37
IDNA30317
MakeTitan Romania
ModelSC27
YOM
ConditionGood Condition
PhotoSee Photo
Spindle table diameter: 2500 mm,
Swing over bed: 2630 mm,
Max height vertical carriage: 1900 mm,
Motor power: 55 kw,
Spindle speed: 1,75-175 rpm,
No. of carriage: 3,
Vertical carriage turret: n. 1 pentagonal,
II vertical carriage: with RAM and n. 1 stroke 760 mm,
III lateral carriage turret,
Control keyboards.
 
  38
IDNA30316
MakeTitan Romania
ModelSC27CC
YOM
ConditionVery good condition
PhotoSee Photo
Spindle table diameter: 2500 mm,
Swing over bed: 2630 mm,
Max height vertical carriage: 1900 mm,
Motor power: 55 Kw,
Spindle speed: 1,75 - 175 rpm,
No. of carriage: 3,
Vertical carriage turret: n. 1 pentagonal,
II vertical carriage: n. 1 with RAM stroke 760 mm,
III lateral carriage turret: n. 1,
Control keyboards.
 
  39
IDNA30272
MakeSedin Russia
Model1L532
YOM1980
ConditionGood Condition
PhotoSee Photo  |  See Video
Turning diameter : 3200 mm,
Face plate diameter : 2800 mm,
Turning Height : 1600 mm,
Work piece Weight : 16 tons,
Cutting force : 67 KN,
Face plate speed : 1,25-63 RPM,
Main drive power : 55 kW,
Overall dimensions : 5485 x 6000 x 4910 mm,
Machine Weight : 43 tons.
 
  40
IDNA30267
MakeSedin Russia
Model1512
YOM1980
ConditionGood Condition
PhotoSee Photo
Face Plate Diameter: 1120 mm,
Swing Diameter: 1250 mm,
Vertical Height: 1000 mm,
Dimensions : 3000 X 3500 X 400 mm,
work piece weight : 6300 kg,
Face plate speed from - to : 31,5 - 250 U/min,
Total power requirement : 30 kW,
Machine Weight - 16 tons.
 
  41
IDNA30264
MakeFroriep-Rheydt
Model1580
YOM
ConditionGood Condition
PhotoSee Photo
Number of supports : 2 pcs,
Swing diameter : 8000 mm,
Table diameter : 7500 mm,
Turning height : 4000 mm,
Max detail weight : 120 tons,
Engine power : approx. 123 kW,
Overall dimensions : 13600 X 10500 X 10900 mm,
Machine weight : 280 tons.
 
  42
IDNA30236
MakeSchiess,German
ModelKZ250
YOM1965
ConditionGood Condition
PhotoSee Photo
Double Column Vertical Turning Lathe
Max. turning diameter : 2700 mm,
Max. turning height : 2300 mm,
Table Diameter : 2500 mm,
Ram stroke : 1400 mm,
Crossbeam stroke : 2140 mm,
Speed range : 0,35-121 U/min,
Max. table load : 15000 kg,
Power : 55 kW,
Machine weight ca. : 43 tons.
The machine is equipped with a copy function on the left column.
 
  43
IDNA30232
MakeKolomna Russia
Model1556
YOM1970
ConditionGood Condition
PhotoSee Photo
Turning diameter : 2700 mm,
The largest diameter of processing side caliper : 2500 mm,
Turning height : 1600 mm,
Faceplate's capacity : 14000 kg,
The longest stroke of the left vertical caliper from the center : 1630 mm,
The greatest length of the stroke of the right vertical caliper from the center : 1630 mm,
The greatest movement of the sled left vertical caliper : 1200 mm,
The greatest movement of the slide of the right vertical slide : 760 mm,
The maximum tilt angle of vertical calipers + 45o
The diameter of the tool holder holders turret : 50 x 50 mm,
The maximum movement of the side slide in the vertical direction : 1500 mm,
The greatest length of the movement of the cross : 1500 mm,
Total Installed Power : 40 kW,
Dimensions : 3600 x 6900 x 5600 mm,
Weight : 45260 kg.
 
  44
IDNA30222
MakeCincinnati
Model
YOM
ConditionGood Condition
PhotoSee Photo
Table dia : 2135 mm,
Dimension (L x W x H) : 4000 x 5300 x 5000 mm,
Distance from the center : 400 mm,
Max. height of the machine : 1500 mm,
Largest diameter of the product : 2000 mm,

Table dia : 2100 mm,
Dimension (L x W x H) : 3350 x 3250 x 4550 mm,
Distance from the center : 1130 mm,
Max. height of the machine : 1100 mm,
Largest diameter of the product : 2192 mm,
Quantity No. : 2
 
  45
IDNA30217
MakeSedin Russia
Model1L532
YOM
ConditionGood Condition
PhotoSee Photo
Turning diameter : 3200 mm,
Face plate diameter : 2800 mm,
Turning Height : 1600 mm,
Work piece Weight : 16 tons,
Cutting force : 67 KN,
Face plate speed : 1,25-63 RPM,
Main drive power : 55 kW,
Overall dimensions : 5485 x 6000 x 4910 mm,
Machine Weight : 43 tons.
 
  46
IDNA30216
MakeRafamet Polish
ModelKCF320A
YOM
ConditionGood Condition
PhotoSee Photo
Turning diameter : 3500 mm,
Face plate diameter : 3200 mm,
Turning Height : 1850 mm,
Work piece Weight : 25 tons,
Vertical ram stroke of vertical supports : 1000 mm,
Horizontal ram stroke of slide supports : 800 mm,
Rapid travel (for supports) : 0.18-10.6 m / min,
Number of supports : 3,
Rapid travel (for cross rail) : 0.58 mm,
Face plate speed : 0.8-40 RPM,
Corner of supports turn : +-30 deg,
Main drive power : 55 kW,
Machine Weight : 70 tons.
 
  47
IDNA30215
MakeKolomna Russia
Model1540
YOM
ConditionGood Condition
PhotoSee Photo
Swing: 4000 mm,
Diameter of a face plate : 4000 mm,
Height of work-piece : 2000 mm,
Max. slider stroke : 1250 mm,
Right slider type : turning,
Left slider type : combinated,
Corner of supports turn: 15 +40,
Weight of the work-piece on a faceplate : 50 tons,
Effort of cutting to a right support : 63 kH,
Effort of cutting to the left support : 50 kH,
The max. total effort of cutting by two supports : 100 kH,
Table speeds : 0.52 - 48.7 rpm,
Feeding : 0,059 - 470 mm/min,
Rapid feeding : 2715 mm/min,
Capacity of the main drive : 63 kw,
Height above a level of a floor : 6000 mm,
Dimensions (length-width-height) : 5900 x 10100 x 7200 mm,
Machine weight : 100 tons.
 
  48
IDNA30214
MakeTitan Romania
ModelSC27
YOM
ConditionGood Condition
PhotoSee Photo
Table : 2500 mm,
Swing : 2700 mm,
Max. work piece height : 1900 mm,
Max. work piece weight : 15 ton,
Main motor : 50 kW,
Table RPM : 1.24-112,
Weight : 38.85 ton.
 
  49
IDNA30213
MakeSedin Russia
Model1525
YOM1974
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter : 2500 mm,
Table diameter : 2240 mm
Max. work piece height: 1600 mm,
Max. work piece weight : 16000 kg,
Table speed range : 1,6...80 rpm ,
Quantity of supports: 2
Movement of vertical support:
- vertical : 1200 mm,
- horizontal : 1390 mm,
Movement speed of vertical support : 5...1800 mm/min,
Max. swivel angle of support's slider : 30 degrees,
Main motor power : 45 kW,
Machine dimensions : 5065 x 5340 x 4190 mm,
Machine weight 35.5 tons.
 
  50
IDNA30201
MakeSkoda Czech
ModelSK25B
YOM1969
ConditionGood working condition
PhotoSee Photo
Max height of workpiece : 1600 mm,
Max diameter of workpiece : 2500 mm,
Diameter of clamping plate : 2400 mm,
Max. diameter of peripheral turning : 2500 mm,
Max. diameter of face turning : 2600 mm,
Main motor output: 40 kW
Dimensions (l x w x h) : 6300 x 5640 x 6600 mm,
Machine weight : 54.3 tons.
2x DRO,
3 heads,
Hydrostatic bed (valid for B type)
 
  51
IDNA30200
MakeWMW Niles ,Germany
ModelDKZ6300-3500
YOM
ConditionGood Condition
PhotoSee Photo
Face plate : 5300 mm,
Swing : 6300 mm,
Turning height : 3500 mm,
Max table load : 50 tons,
RAM stroke : 1800 mm,
No. of RAM : 2
Swiveling range : +/- 30
L x W x H : 8,2 x 14,0 x 8,7 m,
Machine weight : 173 tons.
 
  52
IDNA30199
MakeKolomna Russia
Model1550
YOM1979
ConditionGood Condition
PhotoSee Photo
Max. diameter of work piece : 5000 mm,
Max. height of work piece : 2500 mm,
Chuck diameter : 4500 mm,
Max. shift of vertical supports : 1600 mm,
Turn angle of vertical supports : -15 to +40 degrees,
Max weight of work piece : 63 tones,
Max. effort of cutting by two supports : 12500 kN,
Max. moment of cutting at chuck : 20 000 kNm,
Speed of chuck turning : 0.34 - 31.2 turn/minute,
Vertical and horizontal feed : 0.0435 - 352 mm/turn,
Main motor power: 125 kW,
Dimensions :
Height : 8400 mm;
Width : 11400 mm;
Length : 6600 mm,
Weight : 140 tons.
 
  53
IDNA30198
MakeSedin Russia
Model1L532
YOM
ConditionGood working condition
PhotoSee Photo
Turning diameter : 3200 mm
Face plate diameter : 2800 mm,
Max. work piece height : 1600 mm,
Max. work piece weight : 16 tons,
Face plate turning speed : 1,25...63 rpm,
Motor power : 55 kw,
Machine dimensions : 5490 x 6540 x 5100 mm,
Machine weight : 43 tons.
 
  54
IDNA30196
MakeSedin Russia
Model1L532
YOM1987
ConditionGood Condition
PhotoSee Photo  |  See Video
Turning diameter : 3200 mm
Face plate diameter : 2800 mm,
Max. work piece height : 1600 mm,
Max. work piece weight : 16000 kg,
Face plate turning speed : 1,25...63 rpm,
Motor power : 55 kw,
Machine dimensions : 5490 x 6540 x 5100 mm,
Machine weight : 43000 kg.
 
  55
IDNA30130
MakeKolomna Russia
Model1532
YOM1981
ConditionGood Condition
PhotoSee Photo
Turning diameter : 3200 mm,
Faceplate diameter : 2800 mm,
Turning height : 1600 mm,
Workpiece weight : 16000 kg,
Number of tool slides : 2
Horizontal stroke of tool slide : 1720 mm,
Vertical stroke of tool slide : 1200 mm,
Tool slide positioning speed up to : 1780 mm/min,
Crossrail travel : 1240 mm,
Faceplate speed : 0.25-63 rpm,
Main drive power : 55 kw,
Overall dimensions : 5640 x 7150 x 4900 mm,
Machine weight : 43 ton.
 
  56
IDNA30014
MakeKolomna Russia
Model1550F1
YOM1991
ConditionGood Condition
PhotoSee Photo
Chuck diameter : 4500 mm,
Max. diameter of work piece : 5000 mm,
Max. height of work piece : 2500 mm,
Max. shift of vertical supports : 1600 mm,
Turn angle of vertical supports : -15 to +40 degrees,
Max weight of work piece : 63 tones,
Max. effort of cutting by two supports : 12500 kN,
Max. moment of cutting at chuck : 20,000 kNm,
Speed of chuck turning : 0.34 - 31.2 turn/minute,
Vertical and horizontal feed : 0.0435 - 352 mm/turn,
Main motor power : 125 kW,
Dimensions :
Height - 8400 mm,
Width - 11400 mm,
Length - 6600 mm,
Weight - 140.5 tons.
 
  57
IDNA30002
MakeKolomna Russia
Model1550
YOM1978
ConditionGood Condition
PhotoSee Photo
Max. diameter of work piece : 5000 mm,
Max. height of work piece : 2500 mm,
Chuck diameter : 4500 mm,
Max. shift of vertical supports : 1600 mm,
Turn angle of vertical supports : -15 to +40 degrees,
Max weight of work piece : 63 tones,
Max. effort of cutting by two supports : 12500 kN,
Max. moment of cutting at chuck : 20 000 kNm,
Speed of chuck turning : 0.34 - 31.2 turn/minute,
Vertical and horizontal feed : 0.0435 - 352 mm/turn,
Main motor power: 125 kW,
Dimensions :
Height- 8400 mm;
Width - 11400 mm;
Length - 6600 mm,
Weight - 140 tons
 
  58
IDNA29982
MakeIM Roman
ModelSC17CC
YOM1988
ConditionVery good condition
PhotoSee Photo
Max. turning diameter : 1650 mm,
Workpiece max. height : 1200 mm,
Max. weight of workpiece : 8 tons,
Main motor power : 60 kW,
Main spindle speed range : 222-200 rpm,
Working feed range : 0.05 5 mm/rot.,
Max. travel of cross rail : 1000 mm,
Max. travel of right vertical support slide : 760 mm,
Max. travel of left vertical support slide : 1000 mm,
Max. travel of side head slide : 700 mm,
Total weight of machine : 22 tons,
Overall dimensions : 4100 x 4590 x 4100 mm.
 
  59
IDNA29894
MakeSedin Russia
Model1512
YOM1976
ConditionGood working condition
PhotoSee Photo
Face Plate Diameter: 1120 mm,
Swing Diameter: 1250 mm,
Vertical Height: 1000 mm,
Dimensions : 3000 X 3500 X 400 mm,
work piece weight : 6300 kg,
Face plate speed from - to : 31,5 - 250 U/min,
Total power requirement : 30 kW,
Machine Weight - 16 tons,
Technical manuals available,
Quantity no. : 3.
 
  60
IDNA29868
MakeSedin Russia
Model1L532
YOM1980
ConditionGood Condition
PhotoSee Photo
Table diameter: 2800 mm,
Swing: 3150 mm,
Max workpiece height: 1600 mm.
 
  61
IDNA29862
MakeOM,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Turning dia : 3000 mm,
Maximum Swing : 7000 mm.
 
  62
IDNA29861
MakeOM,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo
Turning dia : 1800 mm,
Maximum Swing : 3000 mm.
 
  63
IDNA29824
MakeSedin Russia
Model1L532
YOM1992
ConditionGood Condition
PhotoSee Photo
Table diameter : 2800 mm,
Swing : 3150 mm,
Max. workpiece height: 1600 mm,
Max table loading: 16 tons,
Max. ram travel: 1200 mm,
Max. horizontal travel of carriage: 1720 mm,
Carriage inclination angle: 30 dgr,
Carriage feeds number: 16,
carriages feeds range: 0.09 - 16 mm/rev,
Feeds of traversal beam: 360 mm/min,
Max. distance between ram's axis: 360 mm,
Distance between table and ram: 0 - 1780 mm,
Distance between table and lower surface of traversal beam: 400 - 1640 mm,
Revolution speeds number: 18,
Table speeds: 1.25-63 rpm,
Main engine power: 55 kW,
Dimensions: 5485 x 6120 x 4910 mm,
Total weight: 41420 kg.
 
  64
IDNI6488
MakeUmaro Bacau ,Romania
ModelSC14
YOM1981
ConditionGood working condition
PhotoSee Photo
Face plate diameter : 1200 mm,
Machine diameter : 1400 mm,
Height : 1000 mm,
Cross roll displacement : 1000 mm,
Mcontrol : AC electrical,
Weight : 16 tons,
Drive : Mechanical.
 
  65
IDNA29727
MakeKolomna Russia
Model1532T
YOM
ConditionGood working condition
PhotoSee Photo
Max turning dia : 3200 mm,
Max working height : 1600 mm,
Max workpiece weight : 16000 kg,
Table dia : 2800 mm
Table rpm : 1.25 ... 63 rpm,
Working feeds : 0.04 ... 16 mm per rev,
Main motor : 55 kW,
Dimensions : 5490 x 6540 x 5100 mm,
Weight of machine : 43 tons.
 
  66
IDNA29643
MakeKolomna Russia
Model1540
YOM1985
ConditionDisassembled
PhotoSee Photo
Swing: 4000 mm,
Diameter of a face plate : 4000 mm,
Height of work-piece : 2000 mm,
Max. slider stroke : 1250 mm,
Right slider type : turning,
Left slider type : combinated,
Corner of supports turn: 15 +40,
Weight of the work-piece on a faceplate : 50 tons,
Effort of cutting to a right support : 63 kH,
Effort of cutting to the left support : 50 kH,
The max. total effort of cutting by two supports : 100 kH,
Table speeds : 0.52 - 48.7 rpm,
Feeding : 0,059 - 470 mm/min,
Rapid feeding : 2715 mm/min,
Capacity of the main drive : 63 kw,
Height above a level of a floor : 6000 mm,
Dimensions (length-width-height) : 5900 x 10100 x 7200 mm,
Machine weight : 100 tons.

EQUIPPED WITH:
Full Pendant Controls
4000 mm Diameter Table w/4-Face Plate Jaws
Taper Turning Attachment
Tracer Attachment
Table Rebuilt in 2009
FEATURES:
2-Swivelling Vertical Rams
Taper Turning Attachment
Tracer Attachment
 
  67
IDNA29615
MakeTitan Romania
ModelSC17
YOM
ConditionGood Condition
PhotoSee Photo
Table dia. : 1450 mm,
Swing dia.: 1650 mm,
Workpiece height : 1200 mm,
Table speed : 4-200 rpm,
Workpiece weight : 8 tons,
Main motor : 55 kW,
Machine weight : 21 tons.
 
  68
IDNA29544
MakeTitan Romania
ModelSC22
YOM1986
ConditionGood Condition
PhotoSee Photo
Max. machining dia. : 2200 mm,
Plate dia. : 2000 mm,
Max. machining height : 1500 mm,
Workpiece weight : 12 tons,
Main motor : 55 kW,
Plate speed : 1 - 140 rpm,
Machine weight : 33 tons.
 
  69
IDNA29528
MakeKolomna Russia
Model1540
YOM1973
ConditionGood working condition
PhotoSee Photo  |  See Video
Swing: 4000 mm,
Diameter of a face plate: 4000 mm,
Height of work-piece: 2000 mm,
Max. slider stroke: 1250 mm,
Right slider type: turning,
Left slider type: combinated,
Corner of supports turn: 15 +40,
Weight of the work-piece on a faceplate: 50000 kg,
Effort of cutting to a right support: 63 kH,
Effort of cutting to the left support: 50 kH,
The max. total effort of cutting by two supports: 100 kH,
Table speeds: 0.52 - 48.7 rpm,
Feeding: 0,059 - 470 mm/min,
Rapid feeding: 2715 mm/min,
Capacity of the main drive: 63 kw,
Height above a level of a floor: 6000 mm,
Dimensions (length-width-height): 5900 x 10100 x 7200 mm,
Machine weight: 100 tons.
 
  70
IDNA29502
MakeRussian
Model1540F1
YOM1988
ConditionGood Condition
PhotoSee Photo
Chuck dia : 4000 mm,
Work piece swing : 4000 mm,
Work piece maximum height : 2000 mm,
Main electric motor power : 125 kW,
Maximum support angular displacement degree : -15,
Work piece maximum ton weight : 63 tons,
Maximum digging force on right support kilogram-force : 6300,
Maximum digging force on left support kilogram-force : 5000,
Maximum digging force on right and left supports kilogram-force : 10000,
Maximum digging moment on chuck kilogram-force * m 16000,
Chuck speed rpm : 0,52 - 48,7,
Support slider stroke length : 1600 mm,
Slider (Support) movement speed : 2950 mm/min,
Boring spindle maximum length : 800 mm,
Side support stroke length : 950 mm,
Support vertical stroke length : 1820 mm,
Maximum digging force of support kilogram-force : 3000,
Face-milling cutter maximum dia : 110 mm,
Machine overall dimensions : 5900 x 10100 x 7200 mm,
Height above floor level : 6000 mm,
Machine weight : 100 tons.
 
  71
IDNA29445
MakeSedin Russia
Model1L532
YOM1980
ConditionGood working condition
PhotoSee Photo  |  See Video
Faceplate diameter : 2800 mm,
Swing diameter : 3200 mm,
Max work piece height : 1600 mm,
Max work piece weight : 16 tons,
Faceplate turning speed range : 1,25...63 u/min,
Machine Weight:43 tons.
 
  72
IDNA29442
MakeSedin Russia
Model1M557
YOM1964/1968
ConditionGood working condition
PhotoSee Photo
Table dia : 2800 mm,
Swing dia : 3200 mm,
Height of job : 1600 mm,
Weight of workpiece : 16 tons,
Total power : 55 KW,
Overall dimensions : 6265 x 5965 x 4950 mm,
Machine weight : 43 tons.
 
  73
IDNI6426
MakeTitan Romania
ModelSC33
YOM1980s
ConditionGood working condition
PhotoSee Photo
Max turning diameter : 3300 mm,
Centre diameter : 3000 mm,
Max job height : 2300 mm,
Max wt. Of work piece : 18 tons
Max motor power : 60 kw,
Total connected load : 75 kW
Space required L x W x H : 6000 x 5200 x 4000 mm.
Machine Weight: 45 tons
 
  74
IDNI6422
MakeNiles,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
Chuck Diameter: 1400 mm (4 Jaw),
Maximum Swing: 1600 mm,
Height Under Tools: 900 mm,
Vertical ram travel : 650 mm,
Motor power : 20 HP,
Machine weight : 12 Tons.
 
  75
IDNI6421
MakeSchiess Froriep
Model14DK100A
YOM1977
ConditionDisassembled
PhotoSee Photo
Single Column Vertical Turning Lathe :
Table diameter : 1000 mm,
Swing diameter : 1400 mm,
Turning height : 1200 mm,
Faceplate turning speed range : 6.3 - 315 RPM,
Workpiece weight max : 4 tons,
Ram head - vertical travel : 1000 mm,
Ram head - cross travel : 995 mm,
Cross rail adjustment - vertical : 500 mm,
Feeds - stepless : 0.1 - 2000 mm/min,
Rapid traverse : 6 m/min,
Main drive motor : 30 kW,
Total power requirement : 45 kW
Weight of the machine approx : 14.5 tons,
Dimensions of the machine approx : 3.5 x 5.5 x 4.0 m,
Equipped with:
Coolant device, Miscellaneous tool holder, Side support.
Set of machine tooling, tool holders which are part of the machine is included.
The machines include all the attachments which we have for them for tool holding etc.
 
  76
IDNI6420
MakeSchiess,German
ModelKZ200
YOM1960
ConditionGood working condition
PhotoSee Photo  |  See Video
Double Column Vertical Turning Lathe :
Table diameter : 2000 mm,
Max. turning diameter : 2200 mm,
Max. turning height : 1500 mm,
Vertical stroke of each ram : 1050 mm,
Max. load on chuck : 6 Ton,
Chuck speed max : 122 RPM
Main motor power : 60 HP
Machine weight : 22 ton,
Machine Size 4800 mm (W) X 4000 mm (L) X 4100 mm (Ht)
Power 415V AC, 3 Phase, 50 Hz,
4 off independent chuck jaws.
5 position manually operated turret to RH Saddle.
The machines include all the attachments which we have for them for tool holding etc.
 
  77
IDNA29392
MakeSedin Russia
Model1525
YOM1987
ConditionGood Condition
PhotoSee Photo
Max. work piece diameter : 2500 mm,
Table diameter : 2240 mm
Max. work piece height: 1600 mm,
Max. work piece weight : 16000 kg,
Table speed range : 1,6...80 rpm ,
Quantity of supports: 2
Movement of vertical support:
- vertical : 1200 mm,
- horizontal : 1390 mm,
Movement speed of vertical support : 5...1800 mm/min,
Max. swivel angle of support's slider : 30 degrees,
Main motor power : 45 kW,
Machine dimensions : 5065 x 5340 x 4190 mm,
Machine weight 35.5 tons.
 
  78
IDNA29361
MakeKolomna Russia
Model1540
YOM
ConditionGood Condition
PhotoSee Photo
Type: double column vertical lathe,
Swing: 4000 mm,
Diameter of a face plate: 4000 mm,
Height of work-piece: 2000 mm,
Max. slider stroke: 1250 mm,
Right slider type: turning,
Left slider type: combinated,
Corner of supports turn: 15 +40,
Weight of the work-piece on a faceplate: 50000 kg,
Effort of cutting to a right support: 63 kH,
Effort of cutting to the left support: 50 kH,
The max. total effort of cutting by two supports: 100 kH,
Table speeds: 0.52 - 48.7 rpm,
Feeding: 0,059 - 470 mm/min,
Rapid feeding: 2715 mm/min,
Capacity of the main drive: 63 kw,
Height above a level of a floor: 6000 mm,
Dimensions (length-width-height): 5900 x 10100 x 7200 mm,
Machine weight: 100 tons.
 
  79
IDNA29334
MakeSedin Russia
Model1512
YOM
ConditionUnder power
PhotoSee Photo  |  See Video
Face Plate Diameter: 1120 mm,
Swing Diameter: 1250 mm,
Vertical Height: 1000 mm,
Dimensions : 3000 X 3500 X 400 mm,
work piece weight : 6300 kg,
Face plate speed from - to : 31,5 - 250 U/min,
Total power requirement : 30 kW,
Machine Weight - 16 tons.
 
  80
IDNA29288
MakeKolomna Russia
Model1550
YOM
ConditionGood Condition
PhotoSee Photo
Max. diameter of work piece : 5000 mm,
Max. height of work piece : 2500 mm,
Chuck diameter : 4500 mm,
Max. shift of vertical supports : 1600 mm,
Turn angle of vertical supports : -15 to +40 degrees,
Max weight of work piece : 63 tones,
Max. effort of cutting by two supports : 12500 kN,
Max. moment of cutting at chuck : 20 000 kNm,
Speed of chuck turning : 0.34 - 31.2 turn/minute,
Vertical and horizontal feed : 0.0435 - 352 mm/turn,
Main motor power: 125 kW,
Dimensions :
H- 8 400 mm;
W - 11 400 mm;
L - 6 600 mm,
Weight - 140 500 kg.
 
  81
IDNA29210
MakeSedin Russia
Model1525
YOM1981
ConditionGood Condition
PhotoSee Photo
Max diameter of detail : 2500 mm,
Max height of details : 1600 mm,
Max weight of detail : 16000 mm,
Faceplate diameter : 2250 mm,
Main drive : 45 kW,
Weight of the machines : 35.5 ton.
 
  82
IDNA29209
MakeKolomna Russia
Model1580L
YOM1968
ConditionGood Condition
PhotoSee Photo
Face plate diameter : 7200 mm,
Max. work piece diameter : 8000 mm,
Max. work piece height : 3200 mm,
Max. work piece weight : 125000 kg,
Max. travel of vertical supports : 4275 mm,
Max. slider movement : 2000 mm,
Supports possible work angle : - 15... +30 deg,
Chuck speed : 0,22...18,3 rpm,
Movement of vertical and horizontal feeds : 0,0352...285 mm/min,
Main electric motor power : 132 kW,
machine overall dimensions : 8615 x 17600 x 9800 mm,
Height above floor level : 8300 mm,
Machine weight : 257000 kg.
 
  83
IDNA29206
MakeKolomna Russia
Model1532
YOM
ConditionGood Condition
PhotoSee Photo
Max turning dia : 3200 mm,
Max working height : 1600 mm,
Max workpiece weight : 16000 kg,
Table dia : 2800 mm
Table rpm : 1.25 ... 63 rpm,
Working feeds : 0.04 ... 16 mm per rev,
Main motor : 55 kW,
Dimensions : 5490 x 6540 x 5100 mm,
Weight of machine : 43000 kg.
 
  84
IDNA29125
MakeKolomna Russia
Model1580L
YOM
ConditionGood Condition
PhotoSee Photo
Face plate diameter : 7200 mm,
Max. work piece diameter : 8000 mm,
Max. work piece height : 3200 mm,
Max. work piece weight : 125000 kg,
Max. travel of vertical supports : 4275 mm,
Max. slider movement : 2000 mm,
Supports possible work angle : - 15... +30 deg,
Chuck speed : 0,22...18,3 rpm,
Movement of vertical and horizontal feeds : 0,0352...285 mm/min,
Main electric motor power : 132 kW,
machine overall dimensions : 8615 x 17600 x 9800 mm,
Height above floor level : 8300 mm,
Machine weight : 257000 kg.
 
  85
IDNA29075
MakeKolomna Russia
Model1563
YOM1978
ConditionGood working condition
PhotoSee Photo
Table Diameter : 6300 mm,
Column to Column : 6300 mm,
Height from table to cross rail : 3690 mm,
Height from table to tool holder : 3550 mm,
Machine Weight : 223 Tons.
Max work load : 125 Tons,
Max work Height : 4000 mm,
Max work diameter : 6300 mm,
Ram Stroke : 2000 mm,
Min work hole diameter : 400 mm,
Ram size : 310 mm X 350 mm,
Ram angle [inner/outer] : 30/15 deg,
Table rotation speed : 4 X stepless 0.3 TO 25 RPM,
Cutting feed speed [X-axis] : stepless : 0.04 TO 285 mm/min,
Cutting feed speed [Z-axis] : stepless : 0.04 TO 285 mm/min,
High speed feeder [X-axis] : 2400 mm/min,
High speed feeder [Z-axis] : 2400 mm/min,
Machine Size : 14200 X 8200 X 9800 mm,
Machine gross wight : 223 tons.
 
  86
IDNA29053
MakeTitan Romania
ModelSC17
YOM1987
ConditionUnder power
PhotoSee Photo
Table dia. : 1450 mm,
Swing dia.: 1650 mm,
Workpiece height : 1200 mm,
Table speed : 4-200 rpm,
Workpiece weight : 8 tons,
Main motor : 55 kW,
Machine weight : 21 tons.
 
  87
IDNA28951
MakeKolomna Russia
Model1580L
YOM1968
ConditionGood working condition
PhotoSee Photo
Face plate diameter : 7200 mm,
Max. work piece diameter : 8000 mm,
Max. work piece height : 3200 mm,
Max. work piece weight : 125000 kg,
Max. travel of vertical supports : 4275 mm,
Max. slider movement : 2000 mm,
Supports possible work angle : - 15... +30 deg,
Chuck speed : 0,22...18,3 rpm,
Movement of vertical and horizontal feeds : 0,0352...285 mm/min,
Main electric motor power : 132 kW,
machine overall dimensions : 8615 x 17600 x 9800 mm,
Height above floor level : 8300 mm,
Machine weight : 257000 kg.
 
  88
IDNA28915
MakeKolomna Russia
Model1540F1
YOM1981
ConditionGood Condition
PhotoSee Photo
Chuck dia 4000 mm, Work piece swing 4000 mm, Work piece maximum height 2000 mm, Main electric motor power 125 kW , Maximum support angular displacement degree -15 , Work piece maximum ton weight 63 tons, Maximum digging force on right support kilogram-force 6300 , Maximum digging force on left support kilogram-force 5000 , Maximum digging force on right and left supports kilogram-force 10000 , Maximum digging moment on chuck kilogram-force * m 16000 , Chuck speed rpm 0,52 - 48,7 , Support slider stroke length mm 1600 , Slider (Support) movement speed 2950 mm/min , Boring spindle maximum length 800 mm, Side support stroke length 950 mm, Support vertical stroke length 1820 mm, Maximum digging force of support kilogram-force 3000 , Face-milling cutter maximum dia 110 mm, Machine overall dimensions : 5900 x 10100 x 7200 mm , Height above floor level 6000 mm, Machine weight 100 tons.
 
  89
IDNA28914
MakeSchiess,German
Model2K1
YOM
ConditionGood Condition
PhotoSee Photo
plate : 4000 mm,
Using max : 5000 mm,
Height maxi piece : 1950 mm,
Spindle : 50 rpm - 75 Kw (new motor 2013),
Travel Ram : 1200 mm,
Table load : 60 tons.
 
  90
IDNI6337
MakeCsepel,Hungary
Model1500
YOM
ConditionGood Condition
PhotoSee Photo
Chuck size : 1300 mm,
Swing : 1500 mm,
Height : 1000 mm,
Vertical Two Ram.
 
  91
IDNI6336
MakeWMW
Model1320
YOM
ConditionGood Condition
PhotoSee Photo
Chuck size : 1050 mm,
Swing : 1350 mm,
Height : 1000 mm.
 
  92
IDNA28630
MakeKolomna Russia
Model1540F1
YOM1983
ConditionGood Condition
PhotoSee Photo
Chuck dia 4000 mm, Work piece swing 4000 mm, Work piece maximum height 2000 mm, Main electric motor power 125 kW , Maximum support angular displacement degree -15 , Work piece maximum ton weight 63 tons, Maximum digging force on right support kilogram-force 6300 , Maximum digging force on left support kilogram-force 5000 , Maximum digging force on right and left supports kilogram-force 10000 , Maximum digging moment on chuck kilogram-force * m 16000 , Chuck speed rpm 0,52 - 48,7 , Support slider stroke length mm 1600 , Slider (Support) movement speed 2950 mm/min , Boring spindle maximum length 800 mm, Side support stroke length 950 mm, Support vertical stroke length 1820 mm, Maximum digging force of support kilogram-force 3000 , Face-milling cutter maximum dia 110 mm, Machine overall dimensions : 5900 x 10100 x 7200 mm , Height above floor level 6000 mm, Machine weight 100 tons.
 
  93
IDNA28533
MakeCincinnati,USA
Model
YOM
Conditiondismantled partially
PhotoSee Photo
Face plate dia: 2200 mm,
Swing dia: 2500 mm,
Height of job: 1600 mm.
 
  94
IDNA28497
MakeKolomna Russia
ModelKU518F1
YOM1991
ConditionGood Condition
PhotoSee Photo  |  See Video
Max workpiece diameter : 3200 mm,
Max workpiece height : 2000 mm,
Max workpiece weight : 50 ton,
Faceplate diameter : 3200 mm,
Faceplate turning speed : 0.66 62.1 RPM,
Max supports run : 1250 mm,
Main drive power : 70 KW,
Pendant controls with DRO,
Overall dimensions : 5100 x 9300 x 7200 mm,
Total machine weight capacity : 95.4 ton.
 
  95
IDNA28389
MakeRussian
Model1540F1
YOM1975
ConditionGood Condition
PhotoSee Photo
Chuck dia 4000 mm, Work piece swing 4000 mm, Work piece maximum height 2000 mm, Main electric motor power 125 kW , Maximum support angular displacement degree -15 , Work piece maximum ton weight 63 tons, Maximum digging force on right support kilogram-force 6300 , Maximum digging force on left support kilogram-force 5000 , Maximum digging force on right and left supports kilogram-force 10000 , Maximum digging moment on chuck kilogram-force * m 16000 , Chuck speed rpm 0,52 - 48,7 , Support slider stroke length mm 1600 , Slider (Support) movement speed 2950 mm/min , Boring spindle maximum length 800 mm, Side support stroke length 950 mm, Support vertical stroke length 1820 mm, Maximum digging force of support kilogram-force 3000 , Face-milling cutter maximum dia 110 mm, Machine overall dimensions : 5900 x 10100 x 7200 mm , Height above floor level 6000 mm, Machine weight 100 tons.
 
  96
IDNI6282
MakeSuraj,Indian
ModelSVL-1200
YOM2007-2008
ConditionGood Condition
PhotoSee Photo
Chuck dia : 1200 mm,
Centre to Centre machining capacity : Center less Height 300 mm,
Maximum Job can be handle in Chuck : OD - 1200 Weight upto 1500 Kgs,
No. of Motor :
1. 25 H.P. - 01 Nos.
2. Coolant Pump - 01 Nos
Total H.P. : 26 H.P.,
Control : Siemens 802D.
 
  97
IDNA28224
MakeKolomna Russia
Model1550
YOM1968
ConditionGood condition,under power
PhotoSee Photo
Max. diameter of job : 5000 mm,
Max. height of job : 2500 mm,
Chuck diameter : 4500 mm,
Max. shift of vertical supports : 1600 mm,
Turn angle of vertical supports : -15 to +40 degrees,
Max weight of work piece : 63 tones
Max. effort of cutting by two supports : 12500 kN,
Max. moment of cutting at chuck : 20 000 kNm,
Speed of chuck turning : 0.34 - 31.2 turn/minute,
Vertical and horizontal feed : 0.0435 - 352 mm/turn,
Main motor power : 125 kW,
Dimensions :
Height : 8400 mm,
Width : 11400 mm,
Length : 6600 mm,
Weight : 140.5 tons.
 
  98
IDNA28209
MakeKolomna Russia
Model1532T
YOM1985
ConditionExcellent
PhotoSee Photo
Turning diameter : 3200 mm,
Face plate diameter : 3200 mm,
Turning height : 2000 mm,
Work piece weight : 40000 kg,
Number of tool slide : 2,
Horizontal stroke of tool slide : 1960 mm,
Vertical stroke of tool slide : 1250 mm,
Distance between tool slide centers : 3800 mm,
Tool slide positioning speed : up to 2540 mm/min,
Cross rail travel : 1873 mm,
Distance between the face plate and the cross rail : 2373 mm,
Distance between the face plate center and the column : 1676 mm,
Face plate speed : 0,66-62 rpm,
Main drive power : 63 kw,
Machine weight : 90400 kg.
 
  99
IDNA28062
MakeKolomna Russia
Model1550
YOM1966
ConditionGood Condition
PhotoSee Photo
Chuck diameter : 4500 mm, Max. diameter of work piece: 5000 mm, Max. height of work piece: 2500 mm, Max. shift of vertical supports: 1600 mm, Turn angle of vertical supports: -15 to +40 degrees, Max weight of work piece: 63 tones, Max. effort of cutting by two supports: 12500 kN, Max. moment of cutting at chuck: 20 000 kNm, Speed of chuck turning: 0.34 - 31.2 turn/minute, Vertical and horizontal feed: 0.0435 - 352 mm/turn, Main motor power: 125 kW, Dimensions: Height - 8 400 mm Width - 11 400 mm Length - 6 600 mm, Weight - 140500 kg.
 
  100
IDNI6149
MakeRussian
Model1M553
YOM
ConditionGood Condition
PhotoSee Photo
Table dia: 2100 mm,
Swing dia: 2300 mm,
Turning height: 1450 mm,
Motor power: 30 HP,
Machine weight: 35 tons.
 
  101
IDNA25443
MakeWMW Niles ,Germany
ModelDKZ6300
YOM1973/1968
ConditionGood Condition
PhotoSee Photo
Max. turning dia : 6300 mm,
Max. working height : 3500 mm,
Faceplate dia : 5300 mm,
Max. weight of the work piece : 50 tons,
Machine weight : 173,000 kg.
The machine's left support, reductor of cross rail's lifting, gear box and electrics are incomplete.
 
  102
IDNA16191
MakeRussian
Model1540F1
YOM1986
ConditionGood condition dismantled
PhotoSee Photo
Chuck dia 4000 mm, Work piece swing 4000 mm, Work piece maximum height 2000 mm, Main electric motor power 125 kW , Maximum support angular displacement degree -15 , Work piece maximum ton weight 63 tons, Maximum digging force on right support kilogram-force 6300 , Maximum digging force on left support kilogram-force 5000 , Maximum digging force on right and left supports kilogram-force 10000 , Maximum digging moment on chuck kilogram-force * m 16000 , Chuck speed rpm 0,52 - 48,7 , Support slider stroke length mm 1600 , Slider (Support) movement speed 2950 mm/min , Boring spindle maximum length 800 mm, Side support stroke length 950 mm, Support vertical stroke length 1820 mm, Maximum digging force of support kilogram-force 3000 , Face-milling cutter maximum dia110 mm, Machine overall dimensions : 5900 x 10100 x 7200 mm , Height above floor level 6000 mm, Machine weight 100 tons.
top