subscribe newsletter
Subscribe

Category : Sheet Metal

Sub-Category : Press Transfer Mechanical

Total Machines Found : 19

Select | Machine Details
 
  1
IDNA30834
MakeWANZKE
ModelHPV250F
YOM1994
ConditionGood working condition
PhotoSee Photo
Capacity : 250 tons,
 
  2
IDNA30733
MakeAIDA,Japan
Model
YOM
ConditionGood working condition
PhotoSee Photo
Transfer Press along with an Orii uncoiler leveler feeder unit :
Capacity : 300 tons,
Stroke : 350 mm,
Stroke Per Min 2nd Axis : 15 - 35,
Stroke Per Min 3rd Axis : 15 - 30,
Die Height : 700 mm,
Adjust : 100 mm,
Bolster : 3250 x 1000 mm,
Slide : 3250 x 1000 mm,
Main Motor : 45 Kw,
Feed Stroke : 250 mm,
Clamp Stroke : 120 mm,
Lift Stroke : 60 mm.
 
  3
IDNA30514
MakeWeingarten
Model
YOM2009
ConditionGood Condition
PhotoSee Photo
Capacity : 2500 tons,
Slide stroke: 450 mm,
Stroke per minutes :16-32,
Slide adjustment: 50 mm,
Die height: 1570 mm,
Slide area: 5000 x 1400 mm,
Bolster area: 5000 x 1400 mm,
Main motor: 220 kW,
(Die cushion)
Stroke: 150 mm,
8 station,
(Transfer equipment)
3D(X,Y,Z)
Drive system: Servo 12 axisw.
 
  4
IDNA30507
MakeKomatsu
ModelT4-1700/550/07
YOM2003
ConditionGood Condition
PhotoSee Photo
Capacity : 1700 ton,
Slider stroke : 550 mm,
Die height : 1140 mm,
Slider Adjustment : 100 mm,
Slide dimension : 4000 x 2000 mm,
Bolster dimension : 4000 x 2000 x 200 mm,
Main motor output : DC 200 KW,
Bolster Height : 620 mm.
 
  5
IDNA30386
MakeVerson
ModelT.S2.2000.192.60T
YOM
ConditionGood Condition
PhotoSee Photo
2 Crank Mechanical Eccentric Press
Capacity : 2000 tons,
Ram stroke : 457 mm,
Ram adjustment : 254 mm,
Ram dimensions : 4998 x 1498 mm,
MOVING (front-back) bolster dimensions : 4998 x 1498 mm,
Moving bolster height : 36 mm,
Stroke per minutes : 15-30,
Main motor power : 300 HP,
Max. height above floor level : 8569 mm,
Clearance between uprights (L-R) : 5298 mm,
Clearance between uprights (F-B) : 1740 mm,
Weight : 345 tons.
Equipped With:
Cushion in bed
Electronic transfer
 
  6
IDNA30305
MakeManzoni Italy
Model-
YOM1996
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 630 tons,
Ram stroke fixed : 350 mm
Stroke par minute : 15-35,
Number of Station : 4
Passage between stations : 380 mm
Height closed die : 850 mm
Height table feeder : 401 mm
Dimension table : 1850 x 1250 mm,
Dimension ram : 1850 x 1250 mm,
Front light columns : 1850 mm,
Lateral light columns : 1200 mm,
Distance max table-ram : 1200 mm,
Bars Opening Stroke : 105 mm,
Internal Light closed bars : 300600 mm,
Internal Light open bars : 820 mm,
Max width coil : 500 mm,
No. Lower cushion : 4,
Max camme extraction sup : 210 mm.
with complete feeder Line brand SARONNI.
Coiler + Straightener + Electronic Feeder.
 
  7
IDNA30227
MakeKomatsu
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 600 tons,
Stroke : 500 mm,
Stroke per minutes (Second Process) : 15 - 30,
Stroke per minutes (Third Process) : 15 -25
Shut Height : 1100 mm,
Bolster : 3600 x 1600 mm,
Stages : 6,
Deep Drawing : 180 mm,
Blank Max Size : 800 x 500 mm,
Blank Thickness : 0.8 - 3.2 mm,
Feed Stroke :600 mm.
 
  8
IDNA30119
MakeAIDA,Japan
ModelFTN30G
YOM1975
ConditionGood Condition
PhotoSee Photo
Capacity : 300 tons,
Stroke : 350 mm,
Stroke per min : 20 -40,
Table size : 2500 x 1000 mm,
Ram size : 2500 x 1000 mm,
Shut height : 700 mm,
Adjustment : 100 mm,
Main motor power : 37 kw.
 
  9
IDNA30038
MakeSato
ModelCL-400-250-170
YOM
ConditionExcellent
PhotoSee Photo
Capacity : 400 tons,
Stroke : 250 mm,
Number of strokes 20~70 spm,
Die height : 700 mm,
Slide adjustment amount : 150 mm,
Bolster plate : 2500 1700 250 mm,
Slide area : 2500 1700 mm,
From the floor to the top of the bolster : 800 mm.
 
  10
IDNA29887
MakeAIDA,Japan
ModelFT2-25
YOM1976
ConditionVery good condition
PhotoSee Photo
Capacity : 250 tons,
Each stage capacity : 50 tons
Capacity of blanking stages : 50 tons,
Number of stages (incl. blanking stage) : 13,
Distance between stages : 250 mm,
Stroke length : 250 mm,
Blanking slide stroke : 60 mm,
Max drawing depth : 85 mm,
Max blank dia : 200 mm,
Adjustment of tool holder : 50 mm,
Number of strokes : 20-40 spm,
Die height (Stroke down adjust up between carrier plate and tool holder) : 650 mm,
Thickness of carrier plate : 230 mm,
Carrier plate hole dia : 200 mm,
Main electric motor : 55 kW,
Knockout capacity : 1 ton (mechanical),
Feed stroke length : 250 mm,
Feed direction : left to right,
Lower die height : 400 mm (over carriage plate),
Clamp stroke length : 120 mm (one side),
Inside width of feed bars : 300 mm (at clamp),
Die cushion capacity : 4.2 ton (2nd stage - 3th stage),
Die cushion capacity : 2.8 ton (4th stage - 13th stage),
Stroke length (die cushion) : 85 mm,
Power source : 380 V/ 50Hz,
Dimension : 7500 x 3270 x 6350 mm,
Weight : 85000 kg.
Bolster 2500 x 700 mm.
 
  11
IDNA29688
MakeAIDA,Japan
ModelFTO-50
YOM1985
ConditionGood working condition
PhotoSee Photo  |  See Video
Capacity : 500 tons
Amount of steps : 4
Strokes per minute : 10 20,
Distance between dies : 500 mm,
Length of press stroke : 400 mm,
Slide adjustment : 100 mm,
High of the holder : 800 mm,
Length of clamp stroke : 150 mm,
Height delivery line : 450 mm,
Main motor : 75 KW.
 
  12
IDNA29664
MakeKomatsu
ModelE2T300
YOM1985
ConditionNot under power
PhotoSee Photo
Capacity : 300 tons,
Stroke : 400 mm,
Stroke per minutes : 18-35,
Die Height : 700 mm,
Slide Adjustment : 100 mm,
Bolster Area : 2500 x 1000 mm,
Main Motor :75 kw,
Weight : 55 tons.
 
  13
IDNA29628
MakeWMW Erfurt,Germany
ModelPTRZSST320/9/400
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 320 tons,
Max. capacity of main ram between uprights : 250 tons,
Max. capacity of each die holder : 80 tons,
Max. extrussion depth : 140 mm,
Max capacity of side ram : 70 tons,
Qnt. of worksposition:
a) Extrussion positions (between uprights): 8,
b) Cut position (outside of uprights) : 1,
Ram stroke in Min: (stepless ajust) : 1632
Main motor power : 63 kW,
Speed of band feeding :10 и 15 m/Min,
Distence between uprights : 4000 mm,
Distance between centres of position : 400 mm,
Stroke of main ram : 420 mm,
Max. distance between bed and die holder : 100 mm,
Thickness of stamp plate : 80 mm,
Max. distance between bed and side ram : 980 mm,
Max diametr of round workspcs. : 375 mm,
Dimensions of clamp surface of:
Bed : 1090 х 1730 mm,
Ram : 355 х 450 mm,
Stamp plate : 3300 х 1000 mm,
Max width of band : 500 mm,
Max thickness of band : 2 mm,
Max feeding stroke by one ram stroke : 400 mm.
 
  14
IDNA29573
MakeNippon Japan
ModelFP-200SWG10
YOM1987
ConditionGood Condition
PhotoSee Photo
Capacity : 200 tons,
Slider : 1700 x 900 mm,
Bolster : 1700 x 1100 mm,
NC feeder .
 
  15
IDNA29572
MakeWMW Erfurt,Germany
ModelPTRZSST320/9/400
YOM1990
ConditionGood Condition
PhotoSee Photo
Total Capacity : 320 tons,
Max. capacity of main ram between uprights : 250 tons,
Max. capacity of each die holder : 80 tons,
Max. extrusion depth : 140 mm,
Max capacity of side ram : 70 tons
Qnt. of works position :
a) Extrusion positions (between uprights) : 8,
b) Cut position (outside of uprights) : 1,
Number of strokes for continuous operation : 16-32/min,
Main motor power : 63 kW,
Speed of band feeding : 10 и 15 m/Min,
Distance between uprights : 4000 mm,
Distance between centers of position : 400 mm,
Stroke of main ram : 420 mm,
Max. distance between bed and die holder : 100 mm,
Thickness of stamp plate : 80 mm,
Max. distance between bed and side ram : 980 mm
Max diameter of round workspcs. : 375 mm,
Dimensions of clamp surface of :
bed : 1090 х 1730 mm,
ram : 355 х 450 mm,
stamp plate : 3300 х 1000 mm,
Max width of band : 500 mm,
Max thickness of band : 2 mm,
Max feeding stroke by one ram stroke : 400 mm,
Weight : 120 tons.
Quantity of press : 3.
 
  16
IDNA29193
MakeFukui
Model
YOM1979
ConditionVery good condition
PhotoSee Photo
Capacity : 1200 tons,
Stroke : 550 mm,
Adjust : 100 mm,
Die Height : 1100 mm,
Bolster : 4700 x 2000 mm,
Slide : 4500 x 1900 mm,
Die Cushion No 1: 60 ton,
Cushion Stroke : 160 mm,
Cushion Pad : 600 x 1400 mm,
Die Cushion No 2 - 5 : 30 ton,
Cushion Stroke : 160 mm,
Cushion Pad : 600 x 1400 mm,
Feed Stroke : 750 mm,
Clamping Stroke : 210 mm,
Lifting Stroke : 120 mm,
Internal Width of Feed Bar : 900, 1150, 1400, 1650 mm,
Height of Feed Line : 645 mm,
Max Blank Size : 650 x 1600 mm,
Min Blank Size : 150 x 460 mm,
Blank Thickness : 0.5 - 1.6 mm.
 
  17
IDNA29027
MakeSchuler German
ModelT2-300-3-305
YOM1969-73
ConditionGood Condition
PhotoSee Photo
Capacity : 300 tons,
Press force at the : 125 mm,
Number of slide strokes per minute (stepless, adjustable): 125-25
Slide stroke: 255 mm
Slide shift: 200 mm
Tool holder shift: 12,7 mm
Max. extract depth: 90 mm
Clamping plate thickness: 150 mm
Height of lower parts of tool: 350 mm
Passage in the table: 250x500 mm
Passage in the clamping plate: 245x480 mm
Main motor: 800-1600 rpm, 21 kW
Servo motor of slide: 1500 rpm, 4 kW
Max. sheet width: 630 mm
Min. sheet width: 125 mm
Max. external diameter of sheet roll: 1800 mm
Max. internal diameter of sheet roll: 800 mm
Min. internal diameter of sheet roll: 490 mm
Max. weight of sheet roll: 12 tons
Max. sheet thickness: 4 mm
Min. sheet thickness: 0,8 mm
Levelling device:
-Max. sheet width: 630 mm
-Max. sheet thickness: 4 mm
-Number of levelling rollers above: 4
-Number of levelling rollers below: 3
Quantity No. : 2.
 
  18
IDNA28866
MakeAIDA,Japan
ModelFT2-80
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 880 ton,
Stroke : 392.5 mm,
SPM : 12-25,
Bolster : 1000 x 3550 mm,
Shut Height : 885 mm,
Adjustment : 85 mm,
Windows : 1212.5 wide,
Micro-inching,
Moving bolster : Front to back,
Two dimensional transfer system pitch : 443.75 mm,
Number of stages : 8 + 1,
Clamp stoke : 150 mm per side.
 
  19
IDNA28688
MakeAIDA,Japan
ModelFT2-20
YOM1977
ConditionGood Condition
PhotoSee Photo
Capacity : 200 tons,
Stroke length : 500 mm,
Number of strokes per minute : 10-22/min,
Max. cutting size : 380 mm,
Max. extract depth : 180 mm,
Number of positions : 8,
Capacity of each position : 80 tons,
Capacity cutting position : 50 tons,
Shut height : 850 mm,
Ram adjustment : 50 mm,
Distance between position : 400 mm,
Bolster plate area : 2800 x 1000 mm,
Die holder area : 390 x 900 mm,
Main electric motor power : 45 kW.
Feeder :
Length feeding stroke : 400 mm,
Length clamping stroke : 50 mm.
top