subscribe newsletter
Subscribe

Category : Forging Equipment

Sub-Category : Upsetter

Total Machines Found : 44

Select | Machine Details
 
  1
IDNA30897
MakeAcme
Model
YOM
ConditionGood working condition
PhotoSee Photo
2" Hill Acme model XN Upsetter
with Magazine Feeder
Dia : 51 mm,
Forge Tons : 353.8 tons,
Grip Open : 89 mm,
Stroke : 229 mm,
Stroke per minutes : 55,
Grip Tons : 181.4 tons,
Gather : 152 mm,
Hold : 46 mm,
Die space length : 361 mm,
Main motor power : 15 kW,
Machine length : 3,886 mm,
Machine width : 2,108 mm,
Machine height : 1,753 mm,
Net weight : 21,319 kgs,
Model number : 2.
 
  2
IDNA30896
MakeNational,USA
Model5FM
YOM
ConditionGood Condition
PhotoSee Photo
5 "
Capacity : 1000 tons,
Dia : 127 mm,
Grip Open : 178 mm,
Stroke : 381 mm,
SPM : 30,
Grip Tons : 499 tonnes
Gather : 206 mm,
Hold : 57 mm,
Die space length : 610 mm,
Die space height : 737 mm,
Thickness of each die : 206 mm,
Main motor power : 37 kW,
Machine length : 5207 mm,
Machine width : 3556 mm,
Distance face of wedge to face plate heading slide forward : 1295 mm,
Crank pin diameter of main shaft : 432 mm,
Net weight : 81.6 tons.
Equipped with the following:
Heat-treated high-tensile alloy steel bedframe with heavy horizontal & vertical bedframe ribs
Long over-arm heading slide allows the cross tie section to be massive and located directly under the front bearing section of the heading slide adding bedframe rigidity in the vital die box area
Solid stepped design pitman provides a large bearing area on the forward stroke, materially reducing bending and shear stresses as well as bearing loads on the wrist pin and pitman
Chrome-nickel-moly forged crankshaft
Air clutch & Brake
60 Hz Electrics
320kW Pillar Induction Heater.
 
  3
IDNA30895
MakeAcme
Model
YOM
ConditionGood working condition
PhotoSee Photo
2" Hill Acme model XN Upsetter with
Magazine Feed & Hydraulic Clamping
Dia : 51 mm,
Forge Tons : 353.8 tons,
Grip Open : 89 mm,
Stroke : 229 mm,
Stroke per minutes : 55,
Grip Tons : 181.4 tons,
Gather : 152 mm,
Hold : 46 mm,
Die space length : 361 mm,
Main motor power : 15 kW,
Machine length : 3,886 mm,
Machine width : 2,108 mm,
Machine height : 1,753 mm,
Net weight : 21,319 kgs,
Model number : 2,
Quantity no : 3.
 
  4
IDNA30889
MakeSmeral,Czech
ModelV1139
YOM
ConditionGood Condition
PhotoSee Photo
4"
Capacity : 800 ton,
Movable die stroke : 180 mm,
Max. upsetting ram stroke : 380 mm,
Upsetting ram workstroke : 250 mm,
Upsetting ram return stroke with closed dies : 130 mm,
Distance between upsetting ram and dies stroke forward : 140 mm,
No. of ram strokes per minute : 35,
Die dimensions length : 590 mm,
Width : 220 mm,
Height : 660 mm,
Main drive motor power 40 kW,
Overall dimensions: floor space : 6300 x 3900 mm,
Height above floor level : 2850 mm,
Mass approx. :68 tons.
 
  5
IDNI6619
MakeNational,USA
Model
YOM1984
ConditionGood working condition
PhotoSee Photo  |  See Video
3''
Capacity : 600 tons,
SR No. : 20988,
main Motor : 40 HP / 960 RPM,
Moving heder : 150 mm,
MOVING HEDER : 150 mm,
Punch Carriar : 290 mm.
 
  6
IDNI6618
MakeNational,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
5" Upsetter,
Capacity : 1100 tons,
Stroke of header : 337 mm,
Gather : 225 mm,
Die opening : 150 mm,
Die height : 662 mm,
Die width (each die) : 187 mm,
Die length : 341 mm maximum,
Stroke per minute : 35
Die and tool space header slide forward : 505 mm,
Air Clutch,
Floor space required : 4825 X 3050 mm.
Quantity No. : 2.
 
  7
IDNA30871
MakeTyazhpressmash
ModelV1132
YOM
ConditionGood working condition
PhotoSee Photo
Max. diameter of workpiece : 35 mm,
Max. diameter of upset flange : 60 mm,
Upset slide nominal force : 160 ton,
Force on clamping slide with dies closed : 160 ton,
Upset slide stroke : 200 mm,
Upset slide stroke with dies closed : 125 mm,
Slide continuous idle strokes per minute : 80,
Electric motor power ~17 kW,
Machine overall dimensions
Length : 2100 mm,
Width : 2820 mm,
Height : 1600 mm.
 
  8
IDNA30811
MakeRussian
ModelB1139
YOM
ConditionGood Condition
PhotoSee Photo
4"
Capacity : 800 tons
Movable die stroke : 180 mm,
Max. upsetting ram stroke : 380 mm,
Upsetting ram workssroke : 250 mm,
Upsetting ram return stroke with close die : 130 mm,
Distance between upsetting ram and dies :
Stroke forward : 140 mm,
Ram stroke per min : 35,
Die dimension : 590 x 220 x 660 mm,
Main drive motor power : 40 kW,
Overall dimension :
Floor space : 6300 x 3900 mm,
Height above floor level : 2850 mm,
Weight : approx. 81 tons.
 
  9
IDNA30800
MakeRyazan Russia
ModelV1134
YOM1991
ConditionGood Condition
PhotoSee Photo
Capacity: 250 tons,
Max.diameter of work piece: 40 mm,
Max. diameter of upser flange: 70 mm,
Force on clamping slide with dies closed: 250 ton,
Upset slide stroke: 220 mm,
Upset slide stroke with dies per min: 63,
Electric motor power: 16 kW,
Machine dimensions (L x W x H): 3875 x 3250 x 1526 mm,
Machine weight: 22300 kg.
 
  10
IDNI6598
MakeAcme
Model
YOM
ConditionGood working condition
PhotoSee Photo  |  See Video
Capacity : 1.5 inch,
Opening capacity ( Rod size upto 40 mm )
Head Flange making capacity : upto 80 mm,
Motar : 30 HP,
Weight : 9 tons.
 
  11
IDNA30466
MakeManyo,Japan
Model
YOM
ConditionGood working condition
PhotoSee Photo
Vertical Upsetter :
Heading Capacity : 200 tons,
Grip Capacity : 300 tons,
Stroke per Min : 60,
Grip Stroke : 100 mm,
Heading Stroke : 180 mm,
Grip Adjustment : 5 mm,
Grip Die Holder : 420 x 300 x 150 mm,
Heading Die Holder : 420 x 180 x 150 mm,
Main Motor : 30 Kw,
Total Machine Weight : 30 tons.
 
  12
IDNA30465
MakeManyo,Japan
Model
YOM
ConditionGood working condition
PhotoSee Photo
Vertical Upsetter :
Heading Capacity : 400 tons,
Grip Capacity : 600 tons,
Stroke per Min : 50,
Grip Stroke : 135 mm,
Heading Stroke : 230 mm,
Grip Adjustment : 6 mm,
Grip Die Holder : 510 x 420 x 200 mm,
Heading Die Holder : 510 x 260 x 200 mm,
Main Motor : 37 Kw,
Total Machine Weight : 40 tons.
 
  13
IDNA30455
MakeRussian
ModelB1136
YOM1989
ConditionGood Condition
PhotoSee Photo
2"
Capacity : 400 tons, ,
Movable die stroke : 125 mm,
Max. upsetting ram stroke : 290 mm,
Upsetting ram workstroke : 190 mm,
Upsetting ram return stroke with closed dies : 60 mm,
Distance between upsetting ram and dies stroke forward : 100 mm,
No. of ram strokes per minute : 50,
Die dimensions: length : 450 mm,
Width : 160 mm,
Height : 480 mm,
Main drive motor power : 21 kW,
Overall dimensions: floor space 4330 x 3150 mm,
Height above floor level : 1860 mm,
Mass approx. : 36 tons.
 
  14
IDNA30448
MakeNational,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
10"
Capacity : 3000 tons,
Stroke : 762 mm,
Stroke per minutes : 25,
Grip Open : 342 mm,
Gather : 584 mm,
Hold : 305 mm,
Die space length : 1,422 mm,
Die space height : 1,168 mm,
Thickness of each die : 330 mm,
Machine length : 8,865 mm,
Machine width : 6,706 mm,
Distance face of wedge to face plate heading slide forward : 2,521 mm,
Main motor power : 220 kW,
Net weight : 476,30 kgs.
 
  15
IDNA30447
MakeNational,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
9"
Capacity : 2250 tons,
Stroke : 660 mm,
Stroke per minutes : 25,
Grip Open : 279 mm,
Grip Tons : 1,020.6 ton,
Gather :381 mm,
Hold : 140 mm,
Die space length : 813 mm,
Die space height : 1,321 mm,
Thickness of each die : 333 mm,
Machine length : 6,706 mm,
Machine width : 6,096 mm,
Distance face of wedge to face plate heading slide forward : 1,778 mm,
Main motor power : 186 kW
Net weight : 242,672 kgs.
 
  16
IDNA30446
MakeNational,USA
Model
YOM
ConditionVery good condition
PhotoSee Photo
7.5"
Capacity : 1800 tons,
Stroke : 559 mm,
Dia : 190 mm,
Grip Open :241 mm,
Stroke per minutes : 20,
Grip Tons : 816.5 tonnes,
Gather : 283 mm,
Hold : 171 mm,
Die space length : 711 mm,
Die space height : 914 mm,
Thickness of each die : 308 mm,
Main motor power : 149 kW,
Machine length : 7,112 mm,
Machine width : 5,334 mm,
Distance face of wedge to face plate heading slide forward : 1,626 mm,
Net weight : 196,405 kgs,
Crank pin diameter of main shaft : 584 mm,
Model number : 7ATF-FM.
 
  17
IDNA30445
MakeAjax
Model
YOM
ConditionGood working condition
PhotoSee Photo
8"
Capacity : 1800 tons,
Dia : 203 mm
Grip Open : 305 mm
Stroke : 610 mm
Stroke per minutes : 23
Grip Tons : 1,179.3 ton
Gather : 381 mm
Hold : 165 mm
Die space length : 813 mm
Die space height : 1,168 mm
Thickness of each die : 330 mm
Main motor power : 112 kW
Machine length : 7,620 mm
Machine width : 4,674 mm
Distance face of wedge to face plate heading slide forward : 1,803 mm
Net weigh : 223,167 kgs
Crank pin diameter of main shaft : 559 mm
Model number : 8
 
  18
IDNA30394
MakeAIDA,Japan
Model
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 250 tons,
Stroke : 260 mm,
Die height : 514 mm,
Machine size : 3400 x 2300 x 2300 mm,
Weight of the machine : approx 20 ton.
Manual book not available
 
  19
IDNA30353
MakeRussian
ModelB1141
YOM
ConditionGood Condition
PhotoSee Photo
6"
Capacity : 1250 tons,
Movable die stroke : 220 mm,
Upsetting ram stroke : 460 mm,
Upsetting ram work stroke : 310 mm,
Upsetting ram return stroke with closed dies : 170 mm,
Distance between upsetting ram and dies stroke forward : 180 mm,
Number of ram strokes per minute : 30,
Die dimensions : length 700 mm, width 260 mm, height 820 mm,
Main motor power : 75 kW,
Dimensions : 6400 x 4365 x 3340 mm,
Weight : 135 tons.
 
  20
IDNI6557
MakeRussian
ModelV1139A
YOM
ConditionGood Condition
PhotoSee Photo
4"
Capacity 800 tons,
Movable die stroke : 180 mm,
Max. upsetting ram stroke : 380 mm,
Upsetting ram workstroke : 250 mm,
Upsetting ram return stroke with closed dies : 130 mm,
Distance between upsetting ram and dies stroke forward : 140 mm,
No. of ram strokes per minute 35,
Die dimensions length : 590 mm,
Width : 220 mm,
Height : 660 mm,
Main drive motor power : 40 kW,
Overall dimensions: floor space : 6300 x 3900 mm,
Height above floor level : 2850 mm,
Weight : 81 tons.
With 2 Die Holders.
 
  21
IDNI6550
MakeSmeral,Czech
ModelLKH600
YOM
ConditionGood Condition
PhotoSee Photo
3"
Capacity : 600 tons
Horizonal Upsetter : 80 mm,
Weight : 47 tons approx.
With compressor and elec. panel.
 
  22
IDNA30171
MakeNational,USA
Model
YOM
ConditionGood Condition
PhotoSee Photo
6"
Capacity : 1300 tons,
Grip Open : 200 mm,
Stroke : 450 mm,
SPM : 27,
Grip tonnage : 650 tons,
Gather : 237.5 mm,
Hold : 115 mm,
Die space length : 650 mm,
Die space height : 800 mm,
Thickness of each die : 275 mm,
Main motor power : 75 hp
Machine length : 5825 mm,
Machine width : 4025 mm,
Distance face of wedge to face plate heading slide forward : 1420 mm,
Net weight : 255,000 lbs,
Crank pin diameter of main shaft : 500 mm,
Model number : 6FM.
 
  23
IDNA30170
MakeAjax
Model
YOM
ConditionGood Condition
PhotoSee Photo
6"
Capacity : 1200 tons,
Grip Open : 200 mm,
Stroke : 450 mm,
SPM : 27
Grip tonnage : 606 tons,
Gather : 275 mm,
Hold : 125 mm,
Die space length : 650 mm,
Die space height : 900 mm,
Thickness of each die : 275 mm,
Main motor power : 75 hp
Machine length : 6100 mm,
Machine width : 4000 mm,
Distance face of wedge to face plate heading slide forward : 1475 mm,
Net weight : 275000 lbs,
Crank pin diameter of main shaft : 413 mm,
Model number :6
 
  24
IDNA30167
MakeRussian
ModelB1143
YOM1975
ConditionGood Condition
PhotoSee Photo
10"
Capacity : 2000 tons ,
Movable die stroke : 280 mm,
Upsetting ram stroke : 570 mm,
Upsetting ram workstroke : 390 mm,
Upsetting ram return stroke with closed dies : 210 mm,
Distance between upsetting ram and dies stroke forward :230 mm,
Number of ram strokes per minut : 25,
Die dimensions:
Length : 850 mm,
Width : 320 mm,
Height : 1030 mm,
Main motor power : 160 kW,
Dimensions : 9000 x 6400 x 3600 mm,
Weight : 268 tons.
 
  25
IDNA30114
MakeSmeral,Czech
ModelLHK800
YOM1975
ConditionGood working condition
PhotoSee Photo
4"
Capacity : 800 tons,
Dia of job : 100 mm,
Ram stroke : 380 mm ,
Stroke per min : 35 SPM ,
Working stroke : 250 mm,
Stroke of clamping ram : 159 mm,
Die sizes : 550 x 210 x 660 mm,
Motor power : 40 kW,
Dimensions : 8350 x 3600 x 3060 mm,
Weight : 83 tons.
 
  26
IDNI6529
MakeEumuco,Germany
Model
YOM
ConditionGood Condition
PhotoSee Photo
3"
Capacity : 600 tons.
 
  27
IDNA29748
MakeRyazan Russia
ModelV1134
YOM
ConditionGood Condition
PhotoSee Photo
Capacity: 250 tons,
Max.diameter of work piece: 40 mm,
Max. diameter of upser flange: 70 mm,
Force on clamping slide with dies closed: 250 ton,
Upset slide stroke: 220 mm,
Upset slide stroke with dies per min: 63,
Electric motor power: 16 kW,
Machine dimensions (L x W x H): 3875 x 3250 x 1526 mm,
Machine weight: 22300 kg.
 
  28
IDNA29656
MakeRjazan,Russia
ModelB1139
YOM1963
ConditionVery good condition
PhotoSee Photo
Capacity : 800 tons
Movable die stroke : 180 mm,
Max. upsetting ram stroke : 380 mm,
Upsetting ram workssroke : 250 mm,
Upsetting ram return stroke with close die : 130 mm,
Distance between upsetting ram and dies :
Stroke forward : 140 mm,
Ram stroke per min : 35,
Die dimension : 590 x 220 x 660 mm,
Main drive motor power : 40 kW,
Overall dimension :
Floor space : 6300 x 3900 mm,
Height above floor level : 2850 mm,
Weight : approx. 81 tons.
 
  29
IDNA29490
MakeNational,USA
Model
YOM
ConditionGood working condition
PhotoSee Photo
5" Upsetter,
Capacity : 1100 tons,
Stroke of header : 337 mm,
Gather : 225 mm,
Die opening : 150 mm,
Die height : 662 mm,
Die width (each die) : 187 mm,
Die length : 341 mm maximum,
Stroke per minute : 35
Die and tool space header slide forward : 505 mm,
Air Clutch,
Floor space required : 4825 X 3050 mm.
 
  30
IDNI6416
MakeRussian
ModelB1139A
YOM
ConditionDisassembled
PhotoSee Photo
Horizontal forging upsetter
4" Upsetter,
Capacity : 800 tons,
Stroke of moving matrix : 180 mm,
Full stroke of extruding slider : 380 mm,
Working stroke of extruding slider : 250 mm,
Back stroke of extruding slider, matrix are closed : 130 mm,
Distance between extruding slider and matrixes : 140 mm,
Slider strokes : 33 per min,
Matrix dimensions :
- length : 590 mm,
- width : 220 mm,
- height : 660 mm,
Main drive : 40 kW,
Overall dimensions : 5800 x 3700 x 2330 mm,
Weight of machine : 85 ton.
 
  31
IDNA29378
MakeRussian
ModelB1138
YOM1979
ConditionVery good condition
PhotoSee Photo
3"
Capacity : 630 tons,
Max. dia. of workpiece : 90 mm,
Max. of upset flang 120 mm,
Upset slide nominal force : 6300 kN,
Force on clamping slide with dies closed : 6300 mm,
Upset slide stroke : 350 mm,
Upset slide stroke with dies closed : 230 mm,
Slide continuous idle strokes per minute : 42 min,
Machine overall dimensions :
Length 4835 mm,
Width 3450 mm,
Height 2880 mm,
Electric motor power 45 kW,
Weight 55.5 tons.
 
  32
IDNI6403
MakeKieserling
Model-
YOM
ConditionGood Condition
PhotoSee Photo
3"
Capacity : 600 tons.
 
  33
IDNA29329
MakeTyazhpressmash
ModelB1136
YOM1985
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity : 400 ton,
Movable die stroke : 125 mm,
Max upsetting ram stroke : 290 mm,
Upsetting ram work stroke : 190 mm,
Upsetting ram return stroke with closed dies : 60 mm,
Distance between upsetting ram and dies stroke forward : 100 mm,
Number of ram strokes per minute 50,
Die dimensions : 450 x 160 x 480 mm,
Electric motor power : 21 kW,
Machine dimensions : 4330 x 3150 x 1860 mm,
Machine weight : 36 tons.
 
  34
IDNA29284
MakeAjax
Model
YOM1979
ConditionGood Condition
PhotoSee Photo
7"
Capacity : 1750 tons,
Width of dies : 711.2 mm,
Height of dies : 889 mm,
Thickness of dies : 304.8 mm,
Stroke of header : 508 mm,
Stroke of dies : 241.3 mm,
Size of Motor : 125 HP(93KW),
Upsetter pressure : 1750 ton,
Stroke per minute : 25(19) : 76%,
Motor (RPM) : 870
With Robot for loading, unloading & upsetting.
 
  35
IDNA29283
MakeNational,USA
Model
YOM1988
ConditionGood working condition
PhotoSee Photo  |  See Video
6"
Capacity : 1300 tons,
Width of dies : 660.4 mm,
Height of dies : 812.8 mm,
Thickness of dies : 282.5 mm,
Stroke of header : 457.2 mm,
Stroke of dies : 165.1 mm,
Size of Motor : 100 HP(75KW),
Upsetter pressure : 1300 ton,
Stroke per minute : 27(23) : 85%,
Motor : 860 RPM.
 
  36
IDNA29282
MakeNational,USA
Model
YOM1983
ConditionGood Condition
PhotoSee Photo
6"
Capacity : 1250 tons,
Width of dies : 660.4 mm,
Height of dies : 812.8 mm,
Thickness of dies : 282.5 mm,
Stroke of header : 508 mm,
Stroke of dies : 165.1 mm,
Size of Motor : 100 HP(75KW),
Upsetter pressure : 1300 ton,
Stroke per minute : 27(23) : 85%,
Motor (RPM) : 870
With Robot for loading, unloading & upsetting.
 
  37
IDNA29166
MakeSmeral,Czech
ModelLHK1200
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1200 ton,
Rod's clamping force : 420 tons,
Max. rod's diameter : 150 mm,
Full travel of the slider : 500 mm,
Matrix dimensions : 660 x 290 x 820 mm,
Weight : 141 ton.
 
  38
IDNA29150
MakeNational,USA
Model4
YOM
ConditionGood working condition
PhotoSee Photo
Auto tong feed (ATF) Upsetter 4'',
Capacity : 800 tons,
Rated steel bar capacity : 101.6 mm,
Ram stroke : 343 mm,
Grip opening : 152 mm,
Gather : 158 mm,
Hold : 76 mm,
Crank pin diameter of main shaft : 381 mm,
Main motor : 40 kw,
Die Space Dimensions:
Length of die space : 546 mm,
Height of die space : 660 mm,
Thickness of each die : 206.4 mm,
Tool & die space : 1149 mm,
Floor Space:
width : 3,430 mm,
length : 4,870 mm,
Net weight : 60900, kgs.
Complete With:
Operator's push button controls
Air clutch & brake system
Complete Electrics
Complete Lubrication system
Tie Bar Construction for greater frame strength
Auto Tong Feed System equipped with automatically-operating mechanical tongs.
 
  39
IDNA29005
MakeRyazan Russia
ModelBB1134
YOMNew in 1982
ConditionGood working condition
PhotoSee Photo  |  See Video
Capacity: 250 tons,
Max.diameter of work piece: 40 mm,
Max. diameter of upser flange: 70 mm,
Force on clamping slide with dies closed: 250 ton,
Upset slide stroke: 220 mm,
Upset slide stroke with dies per min: 63,
Electric motor power: 16 kW,
Machine dimensions (L x W x H): 3875 x 3250 x 1526 mm,
Machine weight: 22300 kg.
 
  40
IDNA28722
MakeRussian
ModelVV1139
YOM1987
Conditionexcellent working condition
PhotoSee Photo
4"
Capacity : 800 ton,
Movable die stroke : 180 mm,
Max. upsetting ram stroke : 380 mm,
Upsetting ram workstroke : 250 mm,
Upsetting ram return stroke with closed dies : 130 mm,
Distance between upsetting ram and dies stroke forward : 140 mm,
No. of ram strokes per minute : 35,
Die dimensions length : 590 mm,
Width : 220 mm,
Height : 660 mm,
Main drive motor power 40 kW,
Overall dimensions: floor space : 6300 x 3900 mm,
Height above floor level : 2850 mm,
Mass approx. :68 tons.
 
  41
IDNA28198
MakeSmeral,Czech
ModelLHK800
YOM1978
ConditionGood working condition
PhotoSee Photo
Nominal power : 800 ton,
The maximum section of mold material : 100 mm,
The run of the main upsetter : 380 mm,
Quantity of hit for minute : 35,
The run of the main upsetter : 250 mm,
Total weight : 81 ton.
Quantity No: 2
 
  42
IDNI6114
MakeAcme
ModelSize 1.5
YOM
ConditionGood working condition
PhotoSee Photo
1.5"
Fixed Header (L x W x H) : 260 x 112 x 360 mm,
Moving Header: 260 x 112 x 360 mm,
Punch Carrier : 315 x 75 x 460 mm,
Shut Height : 245 mm,
Stroke of Header
Punch Carrier Stroke : 225 43 mm,
Moving Header Stroke : 312 234 mm,
Motor Make : ABB,
RPM : 1425,
HP : 25.
 
  43
IDNA26630
MakeAcme
Model
YOM
ConditionGood condition,under power
PhotoSee Photo  |  See Video
Rated bar capacity : 5",
Capacity : 1100 tons,
Gripping force ( approximately) : 500 tons,
Die depth : 725 mm,
Die width : 425 mm,
Die length : 650 mm,
Gather : 237.5 mm,
Header slide stroke : 375 mm,
Strokes per minute : 30,
Motor : 75 HP,
Total weight (approximately) : 92 tons,
Dimensions (approximately) : (height with motor removed) : 3000 W x 5700 L x 2850 H,
Equipped with :
Air clutch,
Electrical controls.
 
  44
IDNA26418
MakeSmeral,Czech
ModelLHK800
YOM
ConditionGood Condition
PhotoSee Photo
4"
Nominal forming force of upsetting slide at end of stroke : 8,000 kN,
Force of gripping slide at dies closed : 8,000 kN,
Max force of gripping slide at final closing phase : 2,800 kN,
Max initial dia. Of material forged - bar : 100 mm,
Max dia. Of upset end at cold stock : 170 mm,
Nominal number of strokes of upsetting slide : 35 min,
Overall stroke of upsetting slide : 380 min,
Working stroke of upsetting slide : 250 mm,
Return stroke of upsetting slide with dies closed : 125 mm,
Stroke of gripping slide : 159 mm,
Die dimensions Length - 550 mm, width - 210 mm, height - 660 mm,
Electromotor output : 40 kW,
Weight of the machine : 80,000 kg.
Max/Min dia of bar worked : 100/50 mm,
Lifter capacity : 350-650 KP,
Working pressure of air : 0.35 - 0.6 Mpa,
Height of bar axis above floor :-
At lowest lifter position and max. bar dia : 550 mm,
At top lifter position and min. bar dia : 1035 mm,
Weight of lifter : 460 kg.
top