subscribe newsletter
Subscribe

Category : Forging Equipment

Sub-Category : Press Forging Open Die Hydraulic

Total Machines Found : 31

Select | Machine Details
 
  1
IDNA30930
MakeSung Kwang SKEM
Model-
YOM2010 recond 2020
ConditionGood working condition
PhotoSee Photo
Four Column Push Down Open Die Forging Press
Capacity : 2500 tons,
Max. press stroke : 2000 mm,
Press daylight : 3000 mm,
Distance between columns (clear width) : 3000 1460 mm,
Number of pull back cylinders : 2,
Die table area (width x length x stroke) : 2000 mm 4000 mm 3000 mm,
Press speeds :
- Forging speed : 40 mm/sec,
- Advance speed : 250 mm/sec,
- Return speed : 250 mm/sec,
- Die table slide forward : 250 mm/sec,
Press forces
- Blanking : 30 MN (3 0 00 tons),
- Return : 3.0 MN (300 tons),
- Table shift at 250 bar : 0.94 MN (94 tons),
Hydraulic pumps :
4 sets Axial piston pump,
Kawasaki
Pressure rate 400bar
Working pressure 350 bar
Electric motors :
- 4 sets main motor : 250 kw 440 volt 1200 rpm,
- 1 set pilot motor : 22 kw 440 volt 1200 rpm,
- 1 set cooling and filtering motor : 15 kw 440 volt 1200 rpm,
Reconditioned 2020
PLC control system : Mitsubishi
 
  2
IDNA30894
MakeZdas
ModelCKV2650
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2650 tons,
 
  3
IDNA30893
MakeZdas
ModelCKV1000
YOMOverhaul in 2005
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 tons,
Working force of the machine : 980 tons,
Operating water pressure : 250 at,
Press stroke : 1250 mm,
Clear height of the press : 2500 mm,
Column spacing : 1250x2500 mm,
Clearance between columns: 2000 mm,
Upper crossbeam width: 1250 mm,
Max. height above the floor : 8600 mm,
Stroke of longitudinal slide on both sides :1600 mm through the center of the press 500 mm,
Stroke of one-sided transverse displacement : 2100 mm
Max. eccentricity in forging :250 mm,
The press is used for the production of forgings in a free manner from ingots up to a weight of 6 tons and for the stamping of ingots up to a weight of 1.7 tons and forging rings on a mandrel.
 
  4
IDNA30877
MakeZdas
ModelCKV1600
YOM
ConditionGood Condition
PhotoSee Photo
High-pressure four-column press for free forging
Capacity : 1600 tons,
 
  5
IDNA30845
MakeZdas
ModelCKW1000
YOM1980
ConditionGood working condition
PhotoSee Photo  |  See Video
ZDAS CKW 1000 , 1000 T Press + Dango 8 Ton RBM
1.YOM 1980 Zdas Model CKW 1000
Capacity : 1000 tons,
Upsetting : 1200 tons,
Construction:
Distance between columns : 1560 mm,
Stroke : 1000 mm
Daylight between bolsters : 2,250 mm,
Speed - forging speed as well as maximum strokes / minute : 130 mm/sec,
Hydraulic controls: oil
Whether the pump room is in the cellar :underground , can be modified.
Whether dies are available or not? : no available
Auxiliary device:
Whether top changing system is remote operated.
Whether table shift is available.
Whether pop-up turntable is not available.
Total power requirement, ( 50Hz or 60Hz ) : Electrical control panel not available.
Whether electric and electronic controls are available? : Not available
Estimated weight of press mechanics : Approx 70 Ton
GA drawing - Available
Hydraulic schematic or at least make and number of main pumps : Lexroth , 2 set
8 ton Dango RBM Model S30.1 svc
Capacity : Loading 8 ton,
Load moment (meter-Tons) : 20 MT
YOM : 1978
Tongs Max/Min Opening 830 /270
Lifting Stroke : 920 mm
Whether electric and electronic controls are not available .
Whether all drawings are available? : yes
Foundation : Ok
Piping : OK , drawing only.
Hydraulic schematics : Ok
Assembly and sub-assembly : Ok
Electrical and cable schedule : Ok drawing only.
Electronic schematics : Ok , drawing only.
 
  6
IDNA30827
MakeZdas
Model
YOM
ConditionGood working condition
PhotoSee Photo  |  See Video
Press Type : Two (2) Column Pull Down,
Capacity : 1000 tons,
Stroke : 1000 mm,
Stroke per minutes : 60 - 90,
Number of main cylinders : 4,
Size of main cylinder : 630 mm,
Forging Capacity # 320 kg/cm : 1100 US ton,
Upsetting Capacity# 345 kg/cm2 : 1200 US ton,
Weight of Parts {\IY0P) estimated G' : 300 KNn1,
Number of return cylinders : 2,
Size of return cyliriders (lifting on annulus) : 230 x 125 mm,
Return Tonnage e 22okg/cm : 1,760 KNm,
Daylight between bolsters : 2,250 m,
Clearance between columns : 1560/ mm.
Operating Speed of Press : 0-130 mm/sec,
Penetration Speed (300 bar) :
one(1) cylinders :0-87 mmfsec,
Approach Speed :0-250mmfsec.

Maker : DANGO&-DIFNENTHAL
Mode : DDSS30.svs
Carrying Capacity : 8 tons,
Load moment : 20 mt,
Tongs max opening : 830 mm,
Tongs min opening : 270 mm,
Lifting lowest position : 865 mm,
Lifting stroke : 920 mm,
Rail gauge(Rail Center Distance) : 3,000 mm,
Tongs shift left & right : 200 mm,
Total electric power source : abt 90 Kw,
Machine weight : abt 40 tons.
 
  7
IDNA30825
MakeSung Kwang SKEM
Model-
YOM
ConditionUnder power
PhotoSee Photo
Blanking Press
Capacity : 3000 tons,
Maximum press stroke : 2000 mm,
Press daylight : 3000 mm,
Distance between columns (Inside width): 3000 1460 mm,
Number of pull back cylinders : 2
Die Table area (width length stroke) : 2000 4000 3000 mm,
Press speeds
- Forging speed : 40 mm/sec,
- Advance speed : 250 mm/sec,
- Return speed : 250 mm/sec,
- Die table slide forward : 250 mm/sec.
Press forces
- Blanking : 30 MN (3000 tons),
- Return : 3.0 MN (300 tons),
- Table shift at 250 bar : 0.94 MN (94 tons),
Hydraulic pumps : 4 sets Axial piston pump, Kawasaki
Pressure rate 400 bar,
Working pressure 350 bar,
Electric motors:
- 4 sets main motors : 250 kw, 440 volt, 1200 rpm,
- 1 set pilot pump : 22 kw, 440 volt,1200 rpm,
- 1 set cooling and filtering motor : 15 kw, 440 volt, 1200 rpm,
PLC control system Mitsubishi
 
  8
IDNA30824
MakeSeonam
Model-
YOM2008 recond 2020
ConditionGood working condition
PhotoSee Photo
Four Column Push Down Open Die Forging Press
Capacity : 2000 tons,
Max. press stroke : 1500 mm,
Press daylight : 3400 mm,
Press force stage, at 300 bar:
- 1 stage (one-central cylinder) : 12.3 MN (1230 tons),
- 2 stage (two-side cylinders) : 10.63 MN (1063 tons),
- 3 stage (three-all cylinders) : 20 MN (2000 tons),
Distance between columns (clear width) : 2730 1180 mm,
Number of pull back cylinders : 2,
Eccentric loading at 20 MN - in line of forging : 150 mm either side,
at right angle to line at forging : 300 mm press center,
Die Table shifting device stroke (Left, Right): 6000 mm (L.3000mm, R.3000mm),
Table area (width length) : 2200 6000 mm,
Press speeds
- Forging speed at 20MN (2000 Ton) : 60 mm/sec,
10.63 MN (1063 Ton) : 80 mm/sec,
- Advance speed. Fas : 250 mm/sec,
- t/slowReturn speed. Fast/slow : 250 mm/sec,
- Die table slide forward. Fast/slow : 250 mm/sec,
Force
- Forging : 20 MN (2000 ton),
- Return 2.4 MN (240 ton),
- Moving table : 0.65 MN (65 ton),
- Top die clamping : 0.15 MN (15 ton),
Hydraulic main pumps : 4 sets A7V, A2FO,
High pressure axial, piston pump, Rexroth Germany,
Total electric power supply
- 4 sets main motor : 185 kw 440 volt 1200 rpm,
- 1 set pilot motor : 37.5 kw 440 volt 1200 rpm,
- 1 set cooling and filtering motor : 22 kw 440 volt 1750 rpm,
- 1 set lube motor : 0.75 kw 440 volt,
Electric main motor : 5 sets 185 kw, 440 volt , 1200 rpm,
Overall dimension of the press:
- Total height : 11,300 mm,
- Press height above floor level : 8,500 mm,
- Depth : 2,800 mm,
Weight of press : Approx. 250 tons.
reconditioned 2020
PLC control panel and Operator panel: Mitsubishi PLC control panel 16 color touch screen.
Cycle mode : Manual, Semi-auto, Auto cycle.
 
  9
IDNA30815
MakeSeonam
Model-
YOM
ConditionGood working condition
PhotoSee Photo  |  See Video
Press Type : Four column push down Oil hydraulic system
Capacity : 3000 tons,
Nominal force (static working pressure of 320 bar) : 3000 tons,
Up-setting force (static working pressure of 350 bar) : 2,500 Tons,
Daylight : 3,400 mm,
Stroke of Movable cross head : 1,500 mm,
Main Ram dia (Center cylinder) : 1 set - ¢700 mm,
Side Ram dia (Side cylinder) : 2 sets - ¢460 mm,
Return cylinder Ram dia : 2 sets - ¢220 mm,
Moving Table : 2,000W 6,000L mm,
Moving Table stroke (center to both side 1,500mm) : 3,000 mm,
Approaching speed : 300 mm/sec,
Center cylinder Forging speed : max 125 mm/sec,
All cylinder Forging speed : max 67 mm/sec,
Up-setting Forging speed (2,500 tons/ 350 bar) : 20 mm/sec,
Return speed : 300 mm/sec,
Hydraulic Main pump : 5 sets Rexroth Plunger Pump (A7VO500LR),
Electric Main Motor : 5 sets 185Kw 6p 440V 60Hz 925 Kw,
Main Tank volume : 20,000 Litter,
Overall dimension : Height above of floor level 9,580mm Depth 2,700 mm,
Weight of press : Approx. 320 ton.
Attachment Equipment :
1) Die shifting device : 3 Die shift
2) Top die clamping device : Air-Cylinder Locking Type
3) Die magazine device : NONE
 
  10
IDNA30759
MakeHdraulik Duisburg
Model-
YOM
ConditionGood Condition
PhotoSee Photo
Press Forging Open Die Hydraulic :
Capacity : 2000 tons.
With Manipulator :
Capacity : 10 tons.
 
  11
IDNA30712
MakeKorea
Model-
YOMNew 2008
ConditionGood working condition
PhotoSee Photo
Free forging press:
Capacity : 2500 tons,
4- Column Push down Frame
Main Cylinder Stroke : 2500 mm,
Open Height : 2400 mm,
Press Speed :
Down 250 mm/sec,
forging 150 (at 1050 ton),
forging 75 (at 2100 ton),
forging 50 (at 2620 ton)
Up 250 mm,
Inside of Tie-Rod :2400 X 1800 mm,
Table Shift cap (at 250 bar),
Pull : 135 ton,
Push : 120 ton,
Main Cylinder Ram Die : 1100 mm,
Working Pressure : 280 kg/cm2,
Main Motor : 300 Kw 6p 440V X 4EA,
Sub Motor 37 Kw X 1 EA,
Main Pump Lx 500 X 4EA / Lz 500 X 1EA,
Main Oil Tank : 14000 liter,
Motor : 15 Kw 4p 440V,
Pre Fill Oil Tank : 2500 liter,
Forge Servo V/V Unit 4 set,
Noise lever 90Db(A) bellow,
Hydraulic pump Servo control,
Manual Semi Auto Operation,
Control Box,
Operation Panel
Supplied with
Cooling Tower
Pump PSV-1210 10HP,
Cooling Tower 80RT 100A,
Water Tank 5 tons,
Control Panel,
Pipes, Fittings and Others.
 
  12
IDNA30457
MakeStanko-Russia
ModelD2240
YOM1982
ConditionGood working condition
PhotoSee Photo
Capacity : 1000 tons,
Ram stroke : 1000 mm,
Max. distance between table and ram : 2250 mm,
Dimensions of pull - out table : 1600 x 1800 mm,
Distance between column : 1500 mm,
Stroke of ejector : 400 mm,
Output : 44 kW,
Dimensions of machine : 6400 x 5030 x 6500 mm,
Weight of machine : 73000 kg.
 
  13
IDNA30436
MakeDnepropress
ModelD2243
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2000 tons,
Traverse stroke : 1400 mm,
Shut height of stamp distance : 2400 mm,
Moving table size : 2000 x 1650 mm,
Moving table stroke : 1500 mm,
Table height above floor : 0 mm,
Ejector force:
- Working stroke (up) : 315 tons,
- Return stroke (down) : 160 tons,
Side ejector force : 20 tons,
Press dimensions:
- Overall height : 11750 mm,
- Right to left : 7000 mm,
- Front to back : 5750 mm,
Press height above floor : 7900 mm,
Press weight : 140 tons.
 
  14
IDNA30403
MakeTaewoong
Model
YOM
ConditionGood working condition
PhotoSee Photo  |  See Video
Construction Inverted 4 column push down
Capacity : 3500 tons,
Number of main cylinders : 3EA,
Number of return cylinders : 2EA,
Forging capacity at maximum pump & control system pressure 500 bar : 2880 tons,
Upset capacity at maximum pump & control system pressure 500 bar : 3500 tons,
Daylight : 3650 mm,
Press stroke : 1500 mm,
Press height from floor level (B) : app. 8100 mm,
Clear passage between columns (C x D) : 2800 x 670 mm,
Distance between columns (E x F) : 3200 x 1065 mm,
Shifting table dimension (G x H ) : 2110 x 4630 mm,
Shifting table stroke : +- 1300 mm,
Speed :
Forging : 125 mm/sec,
Upsetting : 100 mm/sec,
Return : 200 mm/sec.
With Mobile Forging Manipulator
Make : Glama,
Model : GFM - 200/450 D,
Carrying capacity : nom. 200 kN,
Carrying capacity : max. 250 kN,
Clamping moment : max. 450 kNm
(load moment at tongs)
Load moment max. :8125 kNm,
(related to center of front wheel)
Stability moment : 1.625 kNm,
Stability factor,
related to nom. load moment :2.0
Peel driving torque : 45 kNm,
Parallel horizontal position of min. : 900 mm,
tongs center above floor max. 2.400 mm,
Parallel vertical stroke : 1.500 mm,
Vertical tilt of tongs - up 10 degree
- down to floor
Lateral side shift +/- : 200 mm
Turning radius : 5.750 mm
Weight of complete manipulator appr. : 73.000 kg
Overall length 7.700 mm
Overall width, front :3.900 mm
Overall width, rear : 4.020 mm
Overall height : 4.245 mm
Tongs
- Clamping force at each jaw max. : continuously,
- Maximum outside dia. of tongs at max. opening : 1.850 mm,
- Maximum outside dia. when tongs closed :1.710 mm,
Gripping range
1. Set of jaws (main jaws)
- Maximum round : 1.150 mm,
- Maximum square : 950 mm,
- Minimum round and square : 290 mm,
Jaw inserts
- Maximum round : 300 mm,
- Maximum square : 270 mm,
- Minimum round and square : 100 mm,
Axle loads
Without load- front : 37.000 kg,
- rear : 36.000 kg,
With max. load - front : 80.000 kg,
- rear : 18.000 kg,
Tires
Front (polyurethane) 4 x  1016/864 x 305 mm,
Rear (polyurethane) 2 x  1016/864 x 305 mm,
Speeds and Times
Travel speed forwards/backwards, 1. stage : 0 30 m/min,
Infinitely adjustable 2. stage : 0 60 m/min,
Peel rotate speed - left/right infinitely adjustable 0 16 min-1,
Lifting/lowering speed 0 120 mm/s
Vertical tilt speed - up 0 3 /s
- down 0 3 /s
Side shifting - left/right 0 75 mm/sec
Time for tongs - open approx. 10 s
(fully open to fully closed) - close approx. 10 s
1.5
Capacities of Diesel Engine
1 x Diesel engine make Cummings,
Type 6CT8,3C 150 kW total
up to 2000 rpm
1.6
Hydraulic pressures
working circuit max. 140 bar
Tongs circuit max. 180 bar
Travelling circuit max. 280 bar
Hydraulic fluid
Quantity appr. 1.200 ltr.
Quality Standard HLP 46
/ ISO VG 46.
Without hydraulic pumps,motors & electrical parts.
Remark : transfer know -how for forging tech knowledge .
 
  15
IDNA30195
MakeErie
Model
YOM1964 Recondition 2003
ConditionGood working condition
PhotoSee Photo
4 Column, Push-Down
Capacity : 2000 tons,
Stroke : 915 mm,
Daylight : 2000 mm,
Hydraulic Motors
Amount : 2,
Power : 350 HP,
Voltage :440 V,
Pilot Motor
Amount : 1,
Power :15 HP,
Voltage : 440V,
Water Pump : 5 HP,
Oil Cooling Pump : 5 HP,
Column : 2184 mm,
Moving Turntable : 1500 mm,
New Hydraulic, Electrics and Columns.
 
  16
IDNA30177
MakeBreda
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 900 tons,
Stroke : 1010 mm,
Daylight : 2190 mm,
Column diameter : 230 mm,
Distance between the columns : 750 x 1200 mm,
Distance between column center : 1500 x 1050 mm,
Diameter of main cylinder : 817 mm,
Cross saddle shifting : 1000 mm,
Drive power: 290 hp / 380 V / 50 Hz,
Operation: oil-hydraulic.
 
  17
IDNA29856
MakeHBE Korean
Model
YOM2016
ConditionGood working condition
PhotoSee Photo  |  See Video
Upsetting/ Piercing/Shell forging Extrusion Press :
Nominal forging force (static working pressure of 320 bar) : 30 MN (3000 tons),
Maximum press stroke : 1900 mm,
Press daylight : 3680 mm
Distance between column inside (clear width) : 1800 mm 2400 mm,
Number of pull back cylinders : 2,
Bolster Dimension (Lower, Upper) : 1500 mm 1500 mm,
Side Shuttle Position : 1000 mm 1000 mm, 3 position,
Press speeds :
- Forging speed : 30 mm/sec pump only,
- Advance speed : 250 mm/sec,
- Return speed : 250 mm/sec,
Press forces :
- Forging at 320 bar : 30 MN (3000 tons),
- Return at 250 bar : 1.7 MN (170 tons),
- Slide shuttle at 210 bar : 0.1 MN (10 tons),
- Knock out at 210 bar : 1.2 MN(120 tons),
Hydraulic pumps : 4 sets Axial piston pump, Rexroth A7V500,
Electric motors : 2 sets 250 kw, 440 volt, 1200 rpm,
Overall dimension of press
- Total Height : Approx. 15,469 mm,
- Press above floor level : Approx. 11,380 mm,
- Depth : Approx. 4,089 mm,
PLC Control : AB
Cycle Mode : Manual, Semi Auto, Auto.
 
  18
IDNA29855
MakeHBE Korean
Model
YOM2008
ConditionGood working condition
PhotoSee Photo  |  See Video
25MN/30MN Two column push down open die forging press :
Nominal force static working pressure of 300 bar Forging force : 25 MN (2500 tons),
Force static working pressure of 350 bar Upsetting force : 30 MN (3000 tons),
Maximum press stroke : 2000 mm,
Press daylight : 4250 mm,
Distance between column clear width (LR, FB) :1650 mm 3000 mm,
Number of pull back cylinder : 2 (two),
Eccentric loading at 25 MN in line of forging - mm at right angle to line at forging :150 mm either side and 300 mm press center,
Forging tolerance measures on hot work piece : 1 mm,
Die table area (width length stroke) : 2300 mm 4600 mm 2300 mm,
Die shift : 3-position die shift,
Press speeds :
Forging speed at 25 MN : 90 mm/sec,
Upsetting speed at 30 MN : 60 mm/sec,
Advance speed. Fast : 300 mm/sec / 10 mm/sec,
Return speed. Fast : 300 mm/sec / 10 mm/sec,
Die table slide forward. Fast/Slow : 300 mm/sec / 5 mm/sec,
Press forces :
Forging at 300 bar : 25 MN (2500 tons),
Upsetting at 350 bar : 30 MN (3000 tons),
Return at 300 bar : 5.00 MN (500 tons),
Table shift at 300 bar : 1.50 MN (150 tons),
Die shift at 300 bar : 1.0 MN (100 tons),
Top die clamping at 50 bar : 0.07 MN (7 tons),
Hydraulic pumps : 8 sets Axial piston pump
Pressure rate 400 bar
Working pressure 350 bar
- Rexroth : 4800 l/min (300 bar),
- Total flow : 4000 l/min (350 bar),
Electric main motors : 4 sets x 600 kw, 1200 rpm, 3300 volt, Double end shaft,
Total electric power supply
- 4 sets main motors : 2400 kw, 3300 volt, 1200 rpm,
- 1 set pilot motor : 15 kw, 440 volt, 1200 rpm,
- 1 set cooling and filtering motor : 56.25 kw, 440 volt, 1200 rpm, 56.25 kw, 440 volt, 1200 rpm,
- Total power supply : 3146.25 kw
- 3300 volt : 2400 kw
- 440 volt : 71.25 kw
Overall dimension of press
- Height : 14500 mm,
- Press above floor level : 11200 mm,
- Depth : 3300 mm,
Weight of press Approx. : 550 tons.
 
  19
IDNA29845
MakeHSF
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 1500 tons,
Stroke : 1250 mm,
Working Table : 1600 mm,
Main Cylinder : 890 mm,
HYD Unit : 112 Kw X 2 set and 56 Kw X 2 set,
PLC Control Panel Piping, R. C. Foundation & with acc.
 
  20
IDNA29714
MakeKorean Maker
Model
YOM2007
ConditionGood Condition
PhotoSee Photo
1) Open Die Free Forging Press.
Press type : Four column push down oil hydraulic
Capacity : 6500 tons,
Daylight : 5200 mm
Stroke of Movable cross head : 2700 mm,
Main Ram dia (Center cylinder) : 950 mm,
Side Ram dia (Side cylinder) : 750 mm,
Return cylinder Ram dia : 300 mm,
Moving Table : Width 2600 Length 6600 mm,
Moving Table stroke : 5500 mm,
Approaching speed : 300 mm/sec,
Main cylinder Forging speed (2200 tons/320 bar) : 163 mm/sec,
All cylinder Forging speed (5000 tons/320 bar) : 73 mm/sec,
Up-setting Forging speed (6500 tons/420 bar) : 10 mm/sec,
Return speed : 270 mm/sec,
Hydraulic Main pump : 12 sets Rexroth Plunger Pump (A7VO+A2FO),
Electric Main Motor : 12 sets 300 Kw 6p 3.3KV 3600 Kw,
Main Tank volume : 42,000 Litter,
Overall dimension : Height above of floor level 13,900 mm Depth 3,760 mm,
Weight of press : Approx. 1200 tons,
Attachment Equipment :
- Tool shifting device Stroke 4800 mm,
- Top die clamping device,
- Die magazine device 4 stages,
- Pop-up turn table (for ingot) up turn table (for ingot) : 50 tons 1300 mm.
2) Rail Bound Manipulator
Make : Korean,
YOM : new in 2009,
Manipulator type : Rail bound oil hydraulic,
Capacity : 80 tons,
Load moment : 160 Meter-Tons,
Tongs openings : max 2200 / min 420 mm,
max Turning diameter : 3600 mm,
min. Tongs central height above rails : 1800 mm,
max. Tongs central height above rails : 3000 mm,
Vertical stroke of tongs parallel to floor : 1200 mm,
Vertical tilting angle of tongs : Up 13.8 degree / Down 13.8 degree,
Horizontal side shift of tongs : 400 mm,
Horizontal slew angle of tongs : 13 degree,
Central rail distance : 4200 mm,
Rotation speed max : 16 rpm,
Travelling speed : 30~330/660 mm/sec,
Lifting speed : 120 mm/sec,
Travelling Distance : 18 meter,
Hydraulic Main pump : 4 sets Rexroth Plunger Pump (A7VO),
Electric Main Motor : 4 sets 132 Kw 6 p 440 V 528 Kw,
Overall dimension (Height x Width x Length) : 5200 x 6700 x 15700 mm,
Weight of manipulator : Approx. 400 tons.
Raw Material : Ingot,
Finished product : Engine of Ship Vessel, Wind Power Generator Part.
 
  21
IDNA29635
MakeWumag
ModelP156
YOM1984
ConditionGood Condition
PhotoSee Photo
Capacity : 2000 tons,
Slide stroke : 1800 mm,
Distance between table and slider : 3200 mm,
Dimensions : 16100 x 10500 x 10700 mm,
Weight : 340 tons.
Forging manipulators
1) Capacity : 30 tons,
2) Capacity : 12 tons,
In working condition.
1977 YOM,
Manufacturer EZTM,
Weight 172 tons,
Capacity 30 tons,
Load moment 60 tons.
Max diameter of clamp turning circle 2 200 mm.
Max opening of clamp 1 000 mm.
Max height of trunk axis to railhead 1 200 mm.
Max parallel lift of trunk 900 mm,
 
  22
IDNA29456
MakeJSW,Japan
Model
YOMReconditioned 2015
ConditionGood working condition
PhotoSee Photo  |  See Video
1) Open die forging , free forging , four Coulmn , push down action , Hydraulic press.
Capacity : 1000 ton ,
manufacturer :J.S.W ( Japan Steel Work ) - Japan,
full retrofitted in 2015 ( Oil Gear A/S in Korea )
Hydraulic pump - Oil Gear.
2) 10 ton Rail bounded Forging manipulator
Make Dango & Dienthal
full retrofitted in 2015
3) 7 Ton Charging Manipulator , Dango Dienthal
4) Mould and dies set.( Shown in photos. )
fully automatic operating by integration system ( Operating Room )
Remark : manual for Mechanical, Hydraulic (Oil Gear ) , Electrical Control part ( Oil Gear ) available
 
  23
IDNA29414
MakeDnepropetrovsk,Russia
ModelPB1341
YOM1987
ConditionGood Condition
PhotoSee Photo
Capacity : 1250 tons,
Rated press force :
- first stage : 260 tons,
- second stage : 800 tons,
- third stage : 1250 tons,
Permissible eccentricity : 125 mm,
Movable cross-beam stroke : max 1250
Distance between the table and the movable cross-beam in its up position : 2650 mm,
Working zone daylight dimensions:
- across forging center line : 1900 mm,
- along forging center line : 900 mm,
Movable table dimensions :
width : 1250 mm,
length : 3150 mm,
Movable table stroke relative to the press center line :
in one direction : 1400 mm,
in the other direction : 1400 mm,
Movable table force : 300 kN,
Movable table speed : 50...300 mm/s,
Ejector stroke above the table : 400 mm,
Ejector force : 630 kN,
Number of bottom die-change system stations, Nos 3
Movable cross-beam speed :
- at approach (idle) stroke : 300 mm/s,
-at return stroke : 300 mm/s,
- at working stroke at a force up to 75% of the rated force : 150 mm/s,
Movable cross-beam strokes, spm :
- working strokes at a force up to 75% of the rated force and at 22 mm stroke length : 160 mm,
- finishing strokes at a force up to 25% of the rated force and at min. 20 mm stroke length : 90 mm,
- finishing strokes at a force up to 12% of the rated force and at min. 20 mm stroke length : 100 mm,
Movable cross-beam positional accuracy when stopped at automatic forging mode : 1,5 mm,
Control mode :
- manual,
- semi-automatic (manual operation with movable cross-beam automatic stopping as per preset bottom position),
- automatic,
Press drive : Pump-and-accumulator station
Working fluid : Water emulsion
Working fluid pressure : 32 MPa,
Accumulator working volume : 500 l,
Hydraulic station pump capacity : 1500 l/min,
Air pressure in filling unit : 0,6...0,8 MPa,
Overall dimensions of the press :
- in plane (length & width) : 16950 x 12100 mm,
- height : 7270 mm,
Overall dimensions of the press with ejector and bottom die- change system, mm
- in plane (length & width) : 16950 x 13740 mm,
- height : 11410 mm,
Press height above floor level : 7270 mm,
Foundation pit depth max : 4300 mm,
Plain round forged parts, forged product weight complete with a test sample up to 3500 kg.
Flanged round forged parts, length up to 7800 mm.
Forged parts of square section with min. dimensions 140x140.
Forged pinions w/o a hole (diameter up to 1000 mm and weight up to 2000 kg).
Forged pinions with a hole (up to 2000 kg) with min. diameter 240 mm and max. height 700 mm.
Forged rolled rings in weight range from 200 up to 2000 kg, height range from 160 mm up to 650 mm and diameter up to 1700 mm.
Forged hollow-type parts (cylinder-type parts) with length up to 2000 mm with ID from 120 mm up to 315 mm.
Forged clutch-type and disc-type parts with a hole, weight up to 2000 kg.
Forged elliptic bottom-type parts with diameter from 315 up to 1600 mm, thickness from 6 up to 12 mm.
Steel grade: ВСт3; 09Г2С; 10ХСНД; 15ХСНД and other steel grades as per the customers documentation.
 
  24
IDNA29372
MakeSeonam
Model
YOM2010
ConditionDisassembled
PhotoSee Photo
Four column push down Oil hydraulic system
Capacity : 1500 tons,
Daylight : 2250 mm,
Stroke of Movable cross head : 1500 mm,
Max Working Pressure : 300 Kg/cm2,
Cylinder Ram dia : 800 mm,
Return cylinder Ram dia : 135 mm,
Moving table Size : Width 2000 Length 4000 mm,
Moving table Stroke : 2000 mm,
Overall dimension : Height above of floor level 9450 mm, Depth 2540 mm,
Moving table Speed : 50~300 mm/sec,
Moving table power : 60 tons,
Moving table Cylinder dia : 160 mm,
Return power : 85 tons,
Return Stroke : 1500 mm,
Approaching speed : 300 mm/sec,
Forging speed (~150 Kg/cm2) : 56 mm/sec,
Forging speed (150~300 Kg/cm2) : 56~20 mm/sec,
Return speed : 300 mm/sec,
Hydraulic Main pump : 3 sets Rexroth Plunger Pump A7VO500LRD,
Electric Main Motor : 3 sets 160Kw 440V 480 Kw,
Main Tank volume : 15,000 Litter,
Aux Tank volume : 3,000 Litter,
Total volume : 1740 L/min,
Column Type : Straight side frame type,
Column Material : SS400,
Column Front Distance : 2400 mm,
Column Side Distance : 2000 mm,
Column Front Inside Distance : 2400 mm,
Column Side Inside Distance : 1000 mm,
Attachment Equipment:
-Tool shifting device Stroke : 4000 mm,
-Top die clamping device : 20 tons,
-Die magazine device Stroke : 3300 mm.
Raw Material : Ingot,
Finished product : Engine of Ship Vessel, Wind Power Generator Part.
 
  25
IDNA29301
MakeTyazhpressmash
ModelP273A
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 5000 tons,
Stroke : 1250 mm,
Shut height : 2500 mm,
Speed of slide : 200 mm/sec,
Table : 2000 x 2500 mm,
Dimensions : 11440 x 17460 x 8230 mm,
Weight : 510 tons.
 
  26
IDNA29300
MakeTyazhpressmash
ModelP272A
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 3150 tons,
Stroke : 1000 mm,
Shut height : 2200 mm,
Speed of slide : 200 mm/sec,
Table : 1600 x 2000 mm,
Dimensions : 14800 x 10000 x 7100 mm,
Weight : 330 tons.
 
  27
IDNA29201
MakeDnepropetrovsk,Russia
ModelPB1341
YOM1988
ConditionGood Condition
PhotoSee Photo
Capacity : 1250 tons,
Max. ram stroke 1250 mm,
Distance from bed to movable platen when it topmost position 2650 mm,
Adjustable bed dimensions 1250 x 3150 mm,
Adjustable bed stroke with respect to press center line :
- to the left 1400 mm,
- to the right 1400 mm,
Ram speed :
- idle stroke 300 mm,
- workstroke 150 mm,
Knockout stroke above bed 400 mm,
Knockout force 630 kN,
Overall dimensions :
- Left to right 16940 mm,
- Front to back 11540 mm,
- Height above floor level 7270 mm,
Mass approx. 193 t.
Forging accuracy +/- 1,5 mm;
Control manual / semi-automatic (ram stops at lower position) / automatic;
Press hydraulics
type water & oil emulsion ( water )
pressure 320 kgs/ cm2
size of tank 500 l
pumps capacity 1500 l / min
air pressure at filing tank 6.8 kgs/cm2
. Press dimensions
16940 x 11540 x 11410mm
height above the floor 7270mm.
Forging Manipulators - 5 tons.
 
  28
IDNA29006
MakeSchloemann
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2000 ton,
Stroke : 800 mm,
Daylight : 1700 mm,
Distance between the columns (left to right) : 2200 mm,
Distance between the columns (front to back) : 2200 mm,
height of machine above floor : 7000 mm
Without drive
Mode of operation : oil hydraulic.
 
  29
IDNA28635
MakeKramatorsk
ModelNP130
YOM1971
ConditionGood Condition
PhotoSee Photo
Capacity : 30000 tons,
Used in melting shop to get stamped slabs with dimensions (mm): H x 1070 x 1600, H x 870h1600, H x 650 x 1500 from cylindrical shape work piece. Workpiece material-titanium alloys. grades VT1-0, ot4, ot4-0, ot4-1, etc. Hydraulic Forging press NP-130 is equipped with working in aqueous emulsion or chemically treated water hydraulic drives crosshead and sliding table and working on the mineral oil hydraulic control system shut-off and regulating and shut-off valves and valve elements regulated ballasts, are included in the portion of the hydraulic press, which works on water emulsion or water.

Max. working force of the drivers of moving cross beam and table : 32 MPa,
Nominal press force with central loading : 24500 tons,
Entire cross beam stroke : 800 mm,
Working stroke of cross beam with slab forging : 450 mm,
Table : 1700 x 1100 mm,
Table stroke : 3500 mm,
Max. table speed : 300 mm/sec,
Number of hydraulic cylinder : 4,
The diameter of the piston of the working cylinder : 1890 mm,
The diameter of the rod of the working cylinder : 1000 mm,
Housing strike of the working cylinder : 800 mm,
Number of lifting cylinders : 4,
The diameter of the plunger of the lifting cylinder : 500 mm,
Stroke of plunger of lifting cylinder : 800 mm,
Balancing cylinders are missing,
Weight : 1200 tons.
 
  30
IDNA26124
MakeSchloemann
Model
YOM1985
ConditionGood Condition
PhotoSee Photo
Capacity : 1000 tons,
With 3 ton DANGO manipulator,
Running pressure : 315 kp/cm2,
Compressing force : 1000 Mp,
Retraction force : 240 Mp,
Piston stroke : 800 mm,
Clear space between gripping surface : 2250 mm,
Dimensions of the stand : 2000 x 1440 mm,
Stroke of the regulation device : 2 x 900 mm,
Maximum press height : 4000 mm,
maximum depth of the foundation : 5000 mm,
Speed and Performances :-
Speed of descent : 250 mm,
Compressing speed : 110 mm,
Retraction speed : 250 mm,
Start - up :-
Hydraulic installation (HD) for the press operation consists in .
1) Hydraulic pumps type Fabrikat Nepuko, RP315-500, adjustable radial :
Flow rate for 200kp/cm2 : 715 1/min,
Flow rate for 315 kp/cm2 : 450 1/min,
Number of rotations per minute : 750 U/min,
Starting power : ca 20 kW,
2) Filling Pump :-
Operation pressure : 4 kp/cm2,
Flow rate : 1300 1/min,
Starting power : 22 kW,
Number of rotations per minute : 3000 U/min,
3) Cooling pump :-
Operation pressure : 4 kp/cm2,
Flow rate : 1300 1/min,
Working power : 22 kW,
Number of rotations per minute : 3000 U/min.
For each hydraulic pump consisting in :-
Lubricating pump,
Pressure sensors,
Filter,
Recirculation equipment,
Safety valve.
An oil supply installation consist in :-
1) ND oil pump,
Running pressure : 100 kp/cm2,
Flow rate : 180 1/min,
Operation spindle power : 37 kW,
Number of rotations per minute : 1500 U/min,
2) Electrically driven valve,
3) Pressure switch,
4) Safety valve for the running circuit and all required off shuttings,
5) ND oil pump with mountings,
Running pressure : 100 kp/cm2,
Total capacity : 2 x 32 1/mm,
Useful capacity : 131 mm.
1000 tons Schloemann press wit Dango manipulator, The press is very little used as mechanic and hydraulic. Need new control.
 
  31
IDNA26089
MakeDemag
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2000 ton,
Stroke : 1500 mm,
Shut height : 3000 mm,
Table size : 1300 x 2700 mm,
Approach speed : 30 mm,
Return speed : 350 mm.
Dimensions L x B : 5000 x 4000 mm,
Distance between the columns : 1600 / 2100 mm,
Weight of machine : 285 ton.
Mode of operation oil hydraulic.
top