subscribe newsletter
Subscribe

Category : Forging Equipment

Sub-Category : Press Extrusion Hydraulic

Total Machines Found : 6

Select | Machine Details
 
  1
IDNA30418
MakeSchloemann
Model
YOM
ConditionGood Condition
PhotoSee Photo
Press Extrusion Hydraulic Horizontal - Double action type :
Capacity : 4000 tons,
Billet size : 8 inch x 800 mm,
Extrusion speed : 15 mm/sec,
Main motor : 140 kw x 2 ea,
Pump : 130 liter/min x 2 ea (Model : WOMA 1802-P35),
Max. 550 bar.
Main body :
Main ram forward (diameter x stroke) : 1289 mm x 2160 mm x 1 ea,
Main ram return(diameter x stroke) : 292 mm x 2160 mm x 2 ea,
Pierce forward (diameter x stroke) : 540 mm x 2160 mm x 1 ea,
Pierce return(diameter x stroke) : 121 mm x 2160 mm x 2 ea,
Specifications :
Container size (dia.) : 1200 mm x 1030 mm,
Cylinder Dia : 110 mm,
stroke : 1570 mm,
Oil pressure : 2ea(80kg/cm2),
Extrusion plumbing : 6 inch,
Ram speed : 60 mm/s,
Ram control valve : Ball valve,
Valve : on/off duration 6.5 sec.
 
  2
IDNA29968
MakeErie
Model
YOM1994
ConditionGood working condition
PhotoSee Photo
Four columns push down Prestress column :
Forging capacity : 2000 tons,
Main ram dia : 1100 mm,
Pressing stroke : 2380 mm,
Return capacity : 200 tons,
Moving slide advance : 300 mm/sec,
Forging/ Extrusion speed : 1-40 mm/sec(Only pump),
Return speed : 1-300 mm/sec,
Daylight : 3650 mm,
Distance between columns clear width : 2000 mm 1100 mm,
Bottom bolster size : 1900 mm 1370 mm,
 
  3
IDNA29896
MakeLasco
ModelVPA630
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 630 tons,
Ram Stroke : 650 mm,
Ejector Stroke : 500 mm,
Ejector Capacity : 25 tons,
Shut Height : 1000 mm,
Table Size : 980 x 1000 mm,
Ram Speed : 550 mm/sec,
Pressing Speed : 110 mm/sec,
Main Motor : 3 x 160 kW,
Approximate weight of the press : 95 tons.
Technical documentation is available.
 
  4
IDNA29857
MakeErie
Model
YOMRetrofit 2018
ConditionGood working condition
PhotoSee Photo  |  See Video
Four columns push down Prestress column :
Forging capacity : 2000 tons,
Main ram dia : 1100 mm,
Pressing stroke : 2380 mm,
Return capacity : 200 tons,
Moving slide advance : 300 mm/sec,
Forging/ Extrusion speed : 1-40 mm/sec(Only pump),
Return speed : 1-300 mm/sec,
Daylight : 3650 mm,
Distance between columns clear width : 2000 mm 1100 mm,
Bottom bolster size : 1900 mm 1370 mm,
Hydraulic system :
2 sets x Oilgear PVV54 (new),
2 sets x Kawasaki LX500 (new),
2 sets x 525 Kw, 2300 volts, 1200rpm GE, Double and shaft,
Electric control : Allen-Bradley (new),
Knock out capacity : 250 tons,
Knock out stroke : 1200 mm,
Top die slide shuttle system : 3 positions x 800 mm,
Including of:
Retrofit, 2018
All hydraulic components with pumps
All cylinders, packing, seal
PLC Control System with HMI
With 1 year warranty
 
  5
IDNA29474
MakeLombardo,Italy
Model
YOM1958 refurbished in 1997
ConditionGood Condition
PhotoSee Photo
1) Extrusion Press
Maker: Lombard,
Type: 4 column, Gatelock type Rod Press,
Year: 1958 and refurbished in 1997 with new,
PLC, controls and video monitoring
Rating:
Capacity :1800 tons,
Closing : 134 US tons @ 3000 psi,
Return : 80 US tons @ 3000 psi,
Container Seal : 80 US tons @ 3000 psi,
Container Open : 134 US tons @ 3000 psi,
Butt Shear : 67 US tons @ 3000 psi,
Extrusion speed : 1.5 to 38 mm/sec,
Billet Size : Currently configured for 150 mm and
203 mm billet. Maximum size available is 203 mm,
Billet Length (maximum): 584 mm,
Hydraulics: Oilgear
3 main pumps Variable Delivery Oilgear
DV 150. 3 x 200 HP main drive motors.
Electrical Connection: 415 V 3 Phase 50 Hz,
Container Heating :30 kW
Die Stack : 305 mm dia x 213 thick
Electrical Control : Omron PLC with PC graphics screen and press monitor
Major Tools: 3 x Containers and 3 x stems for 150 mm billets.
1 x Container and 2 x stems for 203 mm dia billet.

Please note that this press is suitable for extrusion of both aluminum and
brass.
Runout Equipment
Comprising:
Initial Table
Single Coiler
Runout Table
Cross transfer table
Saw feed conveyor
Cold product cut to length saw
Coil conveyor
Coil final quench tank
Back end testing device for coil (Nick and Break)
Coil removal capstan
Runout Table: Effective length 30 m
Width 400 mm
Cast Iron cooling plates
Cooling Table: Effective length 30 m
Width of Cooling table 2700 mm
Saw Charge Table: Length 25 m
Width 400 mm
Cutting saw : Donaldson Saw
Range 150 mm h x 75 mm w (approx.)
Motor 10 HP
Saw Gauge Table: Length 6300 mm,
Width 400 mm
Cutting length range 1600 mm- 6300 mm
Coiler: Single unit
Drum Size 905 mm OD x 618 mm ID
Depth 250 mm
Drive 1x_.kW MicroDrive variable
speed AC motor drive
Coiler to suit Wire 3.6 mm - 20 mm dia
Flat to 25.4 mm x 3.2 mm
Complete with coil off-take conveyor, final water quench unit and nick and
break back end test unit
Electrical Connection: 415V 3 Phase 50 Hz
Ancillary Press Equipment
Comprising : Electric Die Oven - ___kW
1 t electric jib hoist for
tool loading
Die grit blasting machine
Pedestal drill
Tool assembly tables
Tool racks
2 ) Billet heater
Make: Maker unknown but utilizes all North
American burner equipment. All gas
train equipment fitted during recent
refurbishment
Year: Manufactured in 1973 and had a major
refurbishment in 1987.
Type: Natural Gas Fired Reverberator Furnace
Current Operating Rate: 1.64 tons/hr. (150 mm Dia. Billet)
Electrical Specification: 415 Volt 3 Phase 50 Hz
 
  6
IDNA29473
MakeLoewy
Model
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity : 1500 tons,
Total force : 1660 tons ,
Slide stroke :1650 mm,
Process system pressure : 200 atm,
Press weight : 280 kg.
top