Leaders in forging solutions

subscribe newsletter
Subscribe

Category : Forging Equipment

Sub-Category : Part Former Cold

Total Machines Found : 5

Select | Machine Details
 
  1
IDNA29561
MakeHatebur
ModelBKA4
YOM1981
ConditionGood working condition
PhotoSee Photo
Working posts : 4,
Press capacity : 350 ToF,
Maximum wire dia : 25 mm,
Cutoff length : 100 mm,
Max. piece diameter : 23 mm,
Speed of crankshaft : 65 rpm,
Max. length under head : 160 mm,
Pieces/Minute max. : 65,
Max. blank length : 210 mm,
Motor : 49.5-70 KW,
Weight : 40 tons.
Technical documentation : yes,
Horizontal press, it makes cold pressed bearing rollers from wire coil, for tapered roller radial thrust bearings, maximum pressed roller diameters is 23 mm and maximum diameter for wire is 25 mm.
Automatic feeding system. Also the press can make screws until M20.
 
  2
IDNA28756
MakeSakamura
ModelBP425
YOM1978
ConditionGood Condition
PhotoSee Photo
Number of station : 4D X 4B,
Max. cutoff dia : 10 mm,
Max. cutoff length : 95 mm,
PKO length : 75 mm,
Ram stroke : 150 mm,
Crank pin dia. :160 mm,
Forging load : 50 ton,
Quill dia x length : 36 X 50 mm,
Punch dia X length : 45 X 124 mm,
length between dies :75 mm,
Die block thickness :130 mm,
Cutoff system : Open cutoff,
PPM : 120,
Main motor : 15 X 6P kW,
Weight : 8.5 ton,
Dimensions (L x W x H) : 3.6 X 2.0 X 1.6 m.
With trimming device, clutch, open and turn chucks.
 
  3
IDNA28282
MakeNational,USA
Model1000
YOM
ConditionGood Condition
PhotoSee Photo
5 dies,
Cut off dia : 28,5 mm,
Cut of length : 100 mm,
PKO : 50,
Dies kick out : 125 mm,
With electrical.
 
  4
IDNA27860
MakeNational,USA
Model750-S1
YOM1974
ConditionGood Condition
PhotoSee Photo  |  See Video
Cutoff dia-Mild steel : 1"
Cutoff dia- Alloy steel : 7/8"
Max. kickout length : 4"
Min kickout length : 1"
Max. cutoff length : 4"
Production Speed : 40-65 PPM,
Floor space : 21' L x 9' W,
Weight approx: 86,000 LBS
 
  5
IDNA19119
MakeAT.J. Hanrez Despaigne
ModelPRLC
YOM1968
ConditionGood working condition
PhotoSee Photo
4 Posts Bolt Cold Former : Maximum thread 24 mm,
Maximum bolt length : 180 mm.
Cold bolt maker :Harenz PRM 7
Forming sections : 4
Press Capacity : 400 Ton,
Max Wire Diameter : 20 mm,
Length : max 200 mm,
Ram Stroke : 220 mm,
Main Motor : 70 kW/1500 rot/min,
Stroke/min : max 60,
Technical Documentation : Yes,
Number of machines : 1 piece,
Tools : Yes,1 set
Spare parts : No,
Weight : 55 ton,
Overall Dimensions: Length -7000 mm
                                  Width -3700 mm
Height -2000 mm
It makes cold pressed bolts from wire coil, from M10-M20 and maximum length of 200 mm.
top