subscribe newsletter
Subscribe

Category : Forging Equipment

Sub-Category : Manipulator

Total Machines Found : 33

Select | Machine Details
 
  1
IDNA30931
MakeHyundai
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 4 tons
 
  2
IDNA30926
MakeRyazan Russia
Model
YOM
ConditionGood Condition
PhotoSee Photo
Max loading: 30 tons,
Loading moment: 60 tcm,
Max circle diameter of tongs turning through:2200 mm,
Max opening of tongs:1000 mm,
Max distance between arm axes and rail: 900 mm,
Angle of side turn of arm: 3degree 30minute,
Inclination angle of arm: 7degree10minute
Distance between gripping jaw end face and running wheel axes:3445 mm,
Speed of tongs rotation:6.1 revolution/minute,
Adjusting speed of manipulator moving:0-35m/minute,
Vertical moving speed of arm:5/minute,
Dimension (LR x FB x H): 7000 x 12100 x 4740 mm.
Weight: 172300 kg.
 
  3
IDNA30907
MakeKramatorsk
ModelMK30
YOM1990
ConditionVery good condition
PhotoSee Photo
Capacity : 30 tons,
Load moment : 60 mt,
Maximum diameter of the pincer turning circle : 2200 mm,
Greatest disclosure of tongs : 1000 mm,
Max. height of the trunk axis from the rail head : 1200 mm,
Greatest parallel trunk lift : 900 mm
Аngle of lateral rotation of the trunk : +/- 3`30``,
Angle of the trunk : +/-7`10``,
Distance from the end of the jaws to the axle of the running wheel : 3445 mm,
Speed of rotation of the pliers : 6,1 /Min,
Adjustable movement speed of the manipulator : 0-35 m/Min,
Vertical movement speed of the trunk : 5 m/Min,
Dimensions manipulator:
From left to right: 7000 mm,
From front to back : 12100 mm,
Height from rail head : 4740 mm.
Weight: 172 tons.
 
  4
IDNA30905
MakeLamberton
Model
YOM
ConditionGood Condition
PhotoSee Photo
1/2 Ton Lamberton 5-Axis Hydraulic Forging Manipulator
Capacity : 0.5 tons,
Max. Reach......................................173" (14'5"),
Hydraulic Reservoir Capacity............N/A,
Equipped With:
Completely enclosed, climate controlled cab
Skid-mounted base
Joystick operator's controls
Illuminated cab
Approx. Dimensions (LxWxH) : 166 1/2" x 85" x 115" ,
101 3/8" x 57" (Base Area)
Weight : 8,560 lbs.
 
  5
IDNA30823
MakePahnke
ModelFM4/6,5
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 4.5 tons
Lifting capacity max.: 4000 Kp,
load moment from center of yaws : 6500 Kp. m,
Gripping range max. : 600 - 260 mm,
With inserts : 390 - 50 mm,
Lower peel center above rails : 1020 ( 680) mm,
Overall dimension :
Width : 2100 mm,
Length : 5270 mm,
Height : 2465 (2125) mm,
Total weight : 14.7 tons.
 
  6
IDNA30816
MakeForklift
Model-
YOM
ConditionGood working condition
PhotoSee Photo
7 Ton Loading capacity Manipulator ( Fork Lift Type ) - 1 set
7 ton Loading - 20T Forklift
and
15 Ton loading Capacity manipulator ( Forklift Type ) - 1 set.
15 ton Loading - 40T Forklift
 
  7
IDNA30758
MakeDango & Dienenthal
ModelAMP1000
YOM1973
ConditionGood Condition
PhotoSee Photo
Mobile Forging Manipulator :
Capacity : 1 tons
Load moment : 2.4 mt,
Driving power : 22 kW,
Speed : 0 - 90 m/min,
Dimensions (Lx B xH) : 5600 x 2400 x 2300 mm,
Total weight : 10 tons,
Mode of operation : Oil-hydraulic,
Wheel type.
 
  8
IDNA30757
MakeDango & Dienenthal
ModelA-5.1
YOM1983
ConditionGood Condition
PhotoSee Photo
Mobile Forging Manipulator :
Capacity : 0.8 tons,
Load moment : 1 mt,
Tongs opening round ; 50-230 mm,
Tongs opening square : 50-230 mm,
Driving power : 11 kW,
Dimensions (B x T x H) : 3900 x 1800 x 2100 mm,
Total weight : 5.3 tons,
Speed : 0 - 90 m/min,
Speed of tong : 2 35 / min,
Altitude of tong : 600 - 1000 mm,
Stroke : 500 mm,
Average lifting height : 600 mm,
Mode of operation : elektro-hydraulisch,
Comment : wheel type.
 
  9
IDNA30756
MakeDango & Dienenthal
ModelAMP800
YOM
ConditionGood Condition
PhotoSee Photo
Mobile Forging Manipulator :
Ultimate load : 0.8 tons,
Load moment : 2 mt,
Speed : 63 m/min,
Driving power : 15 kW/ 380 V/ 50 Hz,
Dimensions : 1900 x 4500 x 3300 mm,
Total weight : 9.5 tons,
Mode of operation : Electric drive.
 
  10
IDNA30755
MakeDango & Dienenthal
ModelAMP1000
YOM
ConditionGood Condition
PhotoSee Photo
Mobile Forging Manipulator :
Capacity : 1 tons
Load moment : 3 mt,
Driving power : 40 kW,
Speed : 0 - 70 m/min,
Electrics : 500 V,
Dimensions (Lx B xH) : 5195 x 2510 x 4250 mm,
Total weight : 14 tons,
Mode of operation : Oil hydraulic.
 
  11
IDNA30748
MakeDango & Dienenthal
Model-
YOM
ConditionGood Condition
PhotoSee Photo
Mobile Forging Manipulator :
Capacity : 20 tons,
Overall length : 8000 mm (with normal tongs),
Overall Width : 3820 mm,
Overall Height : 4500 mm (including the cable mast),
Weight of manipulator : 75 tons.
 
  12
IDNA30735
MakeDango & Dienenthal
ModelSV60.1SVZ25
YOM1990
ConditionGood Condition
PhotoSee Photo
Rail Bound Forging Manipulator :
Capacity Data :
Max. Carrying Capacity : 25 tons,
Moment of Load (related to center of tongs) : 558 kN-m (217 ft.tons),
Short Time Overload : 677 kN-m (250 ft.tons),
Moment of Load (related to center of front wheel) : 1166 kN-m (430 ft.tons),
Short time Overload : 1355 kN-m (500 ft.tons),
Tongs Dimensions Data :
Max. Tongs Opening for Rounds : 1143 mm,
Min. Tongs Opening for Rounds : 317 mm,
Max. Tongs Opening with Inserts : 635 mm,
Min. Tongs Opening with Inserts : 101 mm,
Main Dimensions Data :
Total Length : 9525 mm,
Total Width : 3660 mm,
Total Height : 4300 mm,
Lowest Horizontal Position of tongs above floor : 1164 mm,
Parallel Hoist of Tongs : 855 mm,
Tilting of Tongs Upward : 165 mm,
Tilting of Tongs Downward : 304 mm,
Lateral Shift of Tongs to the Left : 203 mm,
Lateral Shift of Tongs tot he Right : 203 mm,
Working Times & Speeds Data :
Opening of Tongs : 150 mm/sec,
Closing of Tongs : 101mm/sec,
Lifting of Tongs : 0 127mm/sec,
Lowering of Tongs : 0 127mm/sec,
Tilting of Tongs Upward : 2 o/ Sec,
Tilting of Tongs Downward : 3 o/ Sec,
Rotating of Tongs (infinitely variable) : 2-20 RPM,
Lateral Shifting of Tongs to the Left : 101 mm/sec,
Lateral Shifting of Tongs to the Right : 101 mm/sec,
Travelling Forward/Backward : 0 508 mm/sec,
2 Steps Preselectable (infinitely variable) : 0 1016 mm/sec (0-40)
Output :
PUMP P1 & P2 EM1:
Motors : 125 HP Per Pump,
Feed Capacity of Main Pumps : 315 l/min,
Speed of Motor : 1180 RPM,
Operating Pressure : 230 bar max.,
Pump Design : Axial Piston Variable Displacement,
Pump Type : PVK 120LS PNN H1V-N,
PUMP P3 EM2:
Motor : 40 HP,
Feed Capacity of Main Pump : 230 l/min,
Speed of Motor : 1780 RPM,
Operating Pressure 140 bar max.,
Pump Design : Axial Piston Double Pump,
Pump Type : PFWH-60-LOFY-T/ + PVWH-11-LSAY-CN,
PUMP P4 EM3:
Motor : See Pump P3,
Feed Capacity of Circulation Pump : 45 l/min,
Speed of Motor : 1780 RPM,
Operating Pressure : 250 bar max.
 
  13
IDNA30730
MakePahnke
ModelFM25/64
YOM1986
ConditionGood working condition
PhotoSee Photo
Rail Bound Forging Manipulator
Lift tons : 25 tons,
Max Rds : 1,473 mm,
Min Rds : 610 mm,
S-Shift : 200 mm,
Max Tongs opening for rounds w/inserts : 1,475 mm,
Min Tongs opening for rounds w/inserts : 600 mm,
Travel Distance : 15 meters.
Manipulator is complete with the following:
Power Feed & Water Cooling Flex Coil Rack
Waste Oil Collection Tank, Stand & Pump
Baltimore Air Coil Cooling Tower and Cooling Circuit Pump and Piping
An assortment of Jaw Selections
An assortment of Spare Parts
 
  14
IDNA30729
MakeForklift
Model-
YOM
ConditionGood working condition
PhotoSee Photo
Mobile Forging Manipulator :
Carrying Capacity : 18 tons
- Forklift (KALMAR made capacity - 32 Ton )
 
  15
IDNA30727
MakeDango & Dienenthal
ModelSSM600
YOM2002
ConditionGood Condition
PhotoSee Photo
Weight max. : 30 tons,
Pincer opening adjustable : 310 - 1600,
Tilting area : +6,5 / -14 grad,
Weight of the machine ca. : 130 tons,
Dimensions of the machine ca. : 10100 X 4100 X 4600 mm.
 
  16
IDNA30713
MakeGlama
Model-
YOM1991
ConditionGood working condition
PhotoSee Photo
Carrying Capacity : 120 KN,
Clamping moment : 250 kNm,
Load moment/related to center of front wheels : 480 kNm,
Peel rotating torque : 25 kNm,
Traction force : 100 kN,
Parallel Horizontal Position of tongs center above floor :
Min : 1050 mm,
Max : 1950 mm,
Parallel vertical stroke : 900 mm,
Vertical tilt of tongs :
Up 6 inch,
down : to floor,
Parallel side shift : +- 200 mm,
Angular side shift :+- 4 inch,
Rail gauge : 3200 mm,
Tongs opening range for rounds:
Max : 1397 mm,
Min : 330 mm,
Tongs opening range for squares :
Max : 1219 mm,
Min : 330 mm,
Tongs opening range for rounds w/inserts :
Max : 787 mm,
Min : 152 mm,
Tongs opening range for squares w/inserts :
Max : 660 mm,
Min : 152 mm,
Max turning circle of fully opened tongs : 2260 mm,
Wheel loads without ingot :
each front wheel : 13 tons,
each rear wheel : 12 tons
wheel loads with ingot :
each front wheel : 24 tons,
each rear wheel 7 tons,
Infinitely adjustable travel speed forwards & backwards:
forging : zero to 600 mm/sec,
transporting : zero to 833 mm/sec,
Peel rotation speed 0-23 rpm,
peel lifting and lowering speed : 140 mm/sec,
Vertical tilt speed both up and down : 3 degree / sec,
Parallel side shift speed : 100 mm/sec,
Tongs opening or closing time : 7/sec
Electric capacity installed:
Oil heaters : 24.2 kW,
electric motors (2) : 75 kW ea,
electric motor for grease pump : 0.37 kW,
Dimensions:
overall length : 11,260 mm,
overall width : 3720 mm,
overall height : 3300 mm,
Net weight of each manipulator : 62.16 tons
Complete with:
Hydraulic System
Lubrication system
Electrical system and controls
An Extensive assortment of spare parts
 
  17
IDNA30548
MakeGlama
ModelGSM 250/500
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 25 tons,
Stroke: 1300 mm,
Load moment: 50 mt,
Type of manipulator: schienengebunden,
Speed: 60 m/min,
Driving power: 180 kW,
Dimensions: 10500 x 4000 x 3800 mm,
Mode of operation: hydraulic.
 
  18
IDNA30543
MakeRussian
Model
YOM1980s
ConditionComplete ,good working condition
PhotoSee Photo
Capacity : 2.5 tons,
Weight : 17 tons.
Moving bolster.
 
  19
IDNA30494
MakeDemag
ModelHSP630/1600
YOM1989
ConditionGood Condition
PhotoSee Photo
Railbound
Capacity : 63 tons,
Stroke: 1500 mm,
Load torque: 160 mt,
Drive power: 350 kW,
Dimensions (L x B x H): 14500 x 6400 x 5700 mm,
Speed : 0 0,5 m/sec,
Total weight: 232 ton.
Pliers opening around 700 - 1800 mm,
Pliers opening square 700-1600 mm.
 
  20
IDNA30395
MakeEuropean
Model25MT
YOM
ConditionGood Condition
PhotoSee Photo
Rail Bound
Carrying Capacity : 12.5 tons
Load Moment : 25 m-tons,
Lifting Highest Position : 1600 mm,
Lifting Lowest Position : 800 mm,
Lifting Stroke : 800 mm,
Lifting Speed : 77 mm/sec,
Tilting Upward : 5 Deg,
Tilting Downward : 5 Deg,
Shifting Right and Left : 200 mm,
Shifting Stroke : 200 mm
Shifting Speed : 80 mm/sec,
Swivel Right : 5 Deg,
Swivel Left : 5 Deg,
Max Jaw Opening : 850 mm,
Min Jaw Opening : 400 mm,
Min Jaw Opening With Insert : 350 mm,
Jaw Gripping Speed : 50 mm/sec,
Max Tong Turning Circle : 1600 mm,
Rotation Speed : 2-14_R/min,
Travelling Speed V1 : 25-480 mm/sec,
Travelling Speed V2 : 960 mm/sec,
Travelling Distance : 13 m,
Rail Gauge : 2900 mm,
Main Pump Volumn : PVK140-A1UV (238L) -2-,
Pressure : 250 kgf/㎠,
Electric Motor : 90 Kw (2set),
Pilot Pump : PVWJ040-A1UV (55.7L) -1-,
Pressure : 220 kgf/㎠,
Electric Motor : 18 Kw (1set),
Circulation Pump : GR80-SMIT16B (400L) -1-,
Pressure : 150 kg/㎠,
Electric Motor : 11 Kw (1set).
 
  21
IDNA30375
MakeGlama
ModelGSM 10/16P
YOM1990
ConditionExcellent
PhotoSee Photo
Rail Bound Forging Manipulator
Capacity : 1 ton,
Max Rds : 404 mm,
Min Rds : 120 mm,
Max Sqr : 335 mm,
S-Shift : 150 mm,
Clamping (Tongs) Moment: 16 kNm,
Min Parallel horiz position of tongs center above floor : 550 mm,
Parallel vertical stroke : 900 mm,
Vertical tilt of tongs - Up : 10,
Vertical tilt of tongs - down to floor,
Rail Centers :2,000 mm,
Max turning circle of fully opened tongs : 865 mm,
Max travel speed forwards/backwards when Transporting : 833 mm/sec,
Peel rotation speed : 0 - 23 rpm,
Peel Lifting and Lowering Speed : 150 mm/sec,
Tongs Opening or Closing time : 5 sec,
Travel Distance :7 meters,
Overall Length : 4944 mm,
Overall Height : 2,200 mm,
Net weight : 10 tons.
 
  22
IDNA30363
MakeMitsubishi
Model
YOM1994
ConditionGood working condition
PhotoSee Photo  |  See Video
Rail Bound
Capacity : 40 tons,
Tongs gripping range : dai 450~1000 mm,
 
  23
IDNA30173
MakeDango & Dienenthal
ModelS80.1 SVS
YOM
ConditionGood Condition
PhotoSee Photo
Heavy Rail Bound Forging Manipulator
Capacity : 25 tons,
Max Rds : 1100 mm,
Min Rds : 160 mm,
Max Sqr : 1000 mm,
Side Shift : 200 mm,
Clamping (Tongs) Moment
Max Parallel horiz position of tongs center above : 1850 mm,
Vertical tilt of tongs - Up : 6.5,
Vertical tilt of tongs - down : 10
Vertical stroke of tongs Parallel to Floor : 850 mm,
Clamping of Tongs complete stroke :170 mm/sec,
Max travel speed forwards/backwards when Forging : 30 mm/sec,
Max travel speed forwards/backwards when Transporting : 50 mm/sec,
Peel rotation speed : 0 - 30 rpm,
Peel Lifting and Lowering Speed : 170 mm/sec,
Vertical tilt speed (up and down) : 170 mm/sec,
Lifting and Lowering of Tongs complete stroke : 170 mm/sec,
Parallel Side Shift Speed : 170 mm/sec,
Total electrical power installed : 273 kW,
Total delivery of Main Pumps : 750 Lit/min,
Total capacity of Accumulator : 150 L,
Usable capacity of Accumulator : 50 L,
Overall Length : 8961 mm,
Overall Width : 4278 mm,
Overall Height : 3755 mm,
Net weight : 180000 kgs,
Full Rebuilt.
 
  24
IDNA30169
MakeZamet
Model
YOMNew 2008
ConditionGood Condition
PhotoSee Photo
Rail Bound Forging Manipulator
Capacity : 50 ton,
Max Rds : 1700 mm,
Min Rds : 200 mm,
Max Sqr : 1500 mm,
Side Shift : 300 mm,
Clamping (Tongs) Moment :1250 kNm,
Min Parallel horiz position of tongs center above floor : 1100 mm,
Max Parallel horiz position of tongs center above : 3000 mm,
Vertical tilt of tongs - Up : 10,
Vertical tilt of tongs - down : 7,
Vertical stroke of tongs Parallel to Floor : 1350 mm,
Horizontal Slew Angle of Tongs : +/- 50 mm,
Rail Centers : 4200 mm,
Max turning circle of fully opened tongs : 3000 mm,
Peel rotation speed : 0-15 rpm,
Lifting and Lowering of Tongs complete stroke : 100 mm/sec.
 
  25
IDNA30120
MakeDango & Dienenthal
ModelZCH25FZ
YOMOverhauled in 2010
ConditionGood Condition
PhotoSee Photo
Charger Manipulator
Capacity : 6 ton,
Load moment :25 mt,
Stroke of claws : 3300 mm,
Bloc diameter : 600 mm,
Dimensions (l x b x h) : 8470 x 2840 x 2700 mm,
Mode of operation : Diesel drive,
Comment : complex overhaul in 2010.
 
  26
IDNA30113
MakeDnepropetrovsk,Russia
ModelMKP5M
YOM1986
ConditionExcellent
PhotoSee Photo
Capacity : 5 tons,
Load movement : 100(10) kN.m(t.m),
Max dia of circle turning jaws : 1300 mm,
Max opening of jaws : 750 mm,
Min height of overarm axis from rail head : 800 mm,
Max parallel lift action of overarm : 600 mm,
Distance from face end of jaws to main frame : 1600 mm,
Adjusted rotation speed of jaws : 1-20 t/min,
Adjusted travelling speed of manipulator : 60 m/min,
Conveyance speed of jaws in vertical surface : 5,6 m/min,
Axis shift of jaws under action of powers : axis +_ 160 , side +_50,
side shift of jaws +_ 200 mm,
tilt of jaws , degree : down 6 , up 3,
Height of manipulator : 2500 mm,
Overall Dimensions in plan : 3400 x 8400 mm,
Weight : 39 tons.
The rail bound non-rotatory manipulators are intended to handle elongated pieces during free forging in manual and automatic modes of operation in hydraulic presses.
Suspension system of the machines makes it possible to perform the next motions of peel shaft:
-Parallel lifting and lowering;
-tilting upwards and downwards;
-side shift;
-rotation;
-axial travel relative to the carriage and return into central position.
The manipulators may be controlled in three modes of operation : manual, semi-automatic, automatic.
They are delivered to customers with ordinary or prolonged peels to be used either as components of plants with integrate control or without a plant to interact with presses from 5 to 31.5 MN and to be controlled from individual control desk.
 
  27
IDNA30046
Make-
Model
YOM
ConditionGood Condition
PhotoSee Photo
Forging attachment
Capacity : 5 tons.
 
  28
IDNA30045
MakeDoosan
ModelD70S-5
YOM2008
ConditionGood working condition
PhotoSee Photo  |  See Video
Loading Capacity : 2 tons,
Consist of Forklift with lifting power : 7 ton,
Standard function of Forklift (2 control levers) :
-Lift & Down (Up & Down),
-Tilting,
Modified & Special function for Forging works (3 control levers) :
-Gripping,
-Rotation,
-Movement of Left & Right side,
No. of control lever : 5 ea,
Specification of Forging Attachment (New 2012) :
Model : IT-2000,
Max Gripping Capacity : 2000 mm,
Maximum Opening of Jaws : 1400 mm,
Rotation : +180 -180 Degree
Dimensions :
L : 3000 mm
W : 1500 mm,
H : 1000 mm,
Weight of Attachment : 2.5 tons.
Total Dimension :
L : 6800 mm,
W : 2120 mm,
H : 3000 mm,
Total Weight : Approx 12 tons.
Tyre Type :
Repainted & Repaired,
One set of forging manipulator attachment (used).
 
  29
IDNA30044
MakeDoosan
Model
YOM2008
ConditionGood Condition
PhotoSee Photo
Capacity : 5 tons,
Consist of Forklift with lifting power : 16 ton,
Tyre Type,
Repainted & Repaired.
 
  30
IDNA29955
MakeDango & Dienenthal
ModelMSM12
YOM2005
ConditionGood working condition
PhotoSee Photo  |  See Video
Loading capacity : 1 tons,
Max. opening clamp : 415 mm,
Upwards tilt angle : 28.5 ,
Downwards tilt angle : 16.5 ,
Driving speed : 1 90 M/min,
Rotation speed : 1 35 Rpm,
Power : 22 Kw,
Dimensions :
Length : 3400 mm,
Width : 1620 mm,
Height : 3200 mm,
Weight : 6500 mm.
 
  31
IDNA29945
MakeDemag
Model
YOMRetrofitted 2017-2018
ConditionGood Condition
PhotoSee Photo
65 Ton/150 MT Rail bound manipulator
Capacity : 65 tons,
Tongs clamping moment : 1500 kNm,
Tongs openings, without inserts (round) : 300/2000 mm
Max. turning circle of opening tongs : 3048 mm
Min. tongs centre height above rails : 1300 mm
Max. tongs centre height above rails : 2800 mm
Vertical stroke of tongs parallel to floor : 1500 mm
Vertical tilting angle of tongs (down , up) :7
Horizontal side shift of tongs 250 mm
Horizontal slew angle of tongs 7
Horizontal movements of tongs in forging :
direction, relative to carriage
Centre rail distance : 4200 mm,
Speed, times:
- forging 0-30 m/min
- traveling 0-40 m/min
- turning of tongs 0-12 RPM
- lifting and lowering of tongs, compl. Stroke 90 mm/sec
- clamping of tongs, compl. Stroke 60 mm/sec
Total electrical capacity installed, approx. : 400 kW,
Total delivery of the main pumps 1,000 L/min
Total capacity of accumulator 120 l
Usable capacity of accumulator 50 l
Cooling capacity, with max. water inlet tem 36C, min. : 160 kW
Travel distance : 20 m,
Weight on rails approx. Mechanic + Hydraulic Approx. : 295 tons.
2017-2018 retrofit, upgrade, new hydraulic,electric system.
Included Supply Part :
65Ton/150MT Rail bound manipulator assembly,
Oil hydraulic control system,
Electric and electronic control system,
Hydraulic piping and fittings,
Manipulator foundation drawing and loading data,
All documentation, drawings and manual,
Auto lubrication system,
Forging press with manipulator integration,
Export packing,
Supervising of commissioning, training (Option),
Rail track with chain,
Cableveyor and cableveyor track.
 
  32
IDNA29938
MakeForklift
Model
YOM
ConditionNew
PhotoSee Photo
Capacity : 1.2 tons,
Arm length : 2200 mm,
Min. dia : 120 mm,
Max. dia : 1250 mm,
Weight of machine : 9.5 tons.
 
  33
IDNI5954
MakeDavy
Model
YOM
ConditionComplete,working condition
PhotoSee Photo
1) 3 tons Rail Bound Manipulator :-
Moment of load to jaw centre : 6 meter ton,
Nominal lift capacity : 3 tons,
Grip force : 80 tons,
Peel rotation torque : 1000 metre kg,
Lowest position of jaw centre from floor with jaw parallel to floor : 910 mm,
Track centre : 2300 mm,
Travel available : 10 metre,
Parallel hoist of jaws : 550 mm maximum,
Upward lift of jaws : 5 degree maximum,
Downward lift of jaws : 17 degree maximum,
Automatic height reset : 100 mm maximum,
Side shift centres : 200 mm maximum,
Electrical voltage,
Motors & auxiliaries : 415 volts AC,
Controls & signaling : 220 volts AC,
Electro valves : 110 volts AC,
Hydraulic pressures,
Auxilliaries (hoist side shift etc.) : 125 kg/cm2,
Long travel & rotate : 150 kg/cm2,
A copy of all electrical, hydraulic drawing & other drawings will be available,

2) Chains 14.5 meter long each for manipulator long travel drive :-
1) cable carrier system.
top