subscribe newsletter
Subscribe

Category : Forging Equipment

Sub-Category : Hammer Forging Penumatic

Total Machines Found : 76

Select | Machine Details
 
  1
IDNA30928
MakeHuta Zygmunt,Polish
ModelMPM6300B
YOM1995
ConditionVery good condition
PhotoSee Photo
Capacity : 2.5 tons,
Energy of blow : 70 kJ,
Weight of falling part : 2496 kg,
Max weight of upper die : 800 kgs,
Anvil block weight w/o die holder : 47.5 tons,
Weight of hammer with anvil block : 72.5 tons,
Approximate forging weight : 1.5-7 kg,
Steam of incoming air pressure : 0.5-0.7 MPa,
Average Steam consumption : 970 kg/h,
Average cold air consumption : 24 m3/min,
Average hot air consumption : 18 m3/min,
Number of blows per minute : 100 1/min,
Overall dimension :
Length of hammer : 3100 mm,
Width of hammer : 1730 mm,
Total height of hammer : 5145 mm,
Height of hammer above floor : 4100 mm,
Min height of die partition above : 780 mm,
Min height of the die (without tail) : 300 mm,
Guideway spacing : 636 mm,
Length of die seat : 650 mm,
Length of the seat in the die holder : 900 mm,
Max width of working area : 650 mm,
Max tup stroke : 850 mm.
 
  2
IDNA30917
MakeBanning
Model
YOM
ConditionGood working condition
PhotoSee Photo
Maximum forming energy: 160 kJ,
Piston stroke: 1250 mm,
Maximum number of strokes: 80 / min,
Passage between lines (width): 700 mm,
Minimum die height: 360 mm,
Ram weight: 3000 kg,
The machine is fully operational, connected and in working order,
 
  3
IDNA30908
MakeKramatorsk
ModelM2152
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 16 tons,
Nominal mass of drop parts : 16000 kg,
Impact energy : 400 KJ,
Ram stroke : 1500 mm,
Ram stroke per minute : 20,
Distance clear between guides : 1180 mm,
Ram dimensions front to back : 1500 mm,
Die holder dimensions front to back : 1600 mm,
Bottom die impression to floor distance : 500 mm,
Steam/air pressure : 0.7-0.9 MPa,
Overal dimensions :
- Floor space : 4500 x 2450 mm,
- Height above floor level : 7920 mm,
Mass of anvil block : 325 tons,
Total weight of hammer : 425 tons.
 
  4
IDNA30890
MakeTMP Voronezh Russia
ModelM2145
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 3.15 tons,
Nominal mass of drop parts : 3150 kg,
Rated striking energy :80 KJ,
Max. no. of blows/min. : 56,
Ram stroke : 1250 mm,
Uprights distance : 710 mm,
Ram dimensions : 750 mm,
Die holder : 1000 mm,
Min. die holder to ram distance : 340 mm,
Steam/air pressure : 0.7-0.9 MPa,
Mass (less anvil block) : 25 tons,
Mass of anvil block : 63 tons.
 
  5
IDNA30876
MakeRussian
Model
YOM1986
ConditionGood Condition
PhotoSee Photo
Capacity : 25 tons,
Max RAM stroke : 1150 mm,
Max Energy: 9 bar 48,000 daN.m,
Min Energy : 6 bar 38,000 daN.m,
Hitting Energy : 480 Kj
Max debit necessary for air: 321,5 Nm3/min
Length x width x height: 4920 mm × 2800 mm, × 13700 mm,
Weight : 45.8 tons.
 
  6
IDNA30856
MakeTMP Voronezh Russia
ModelM211
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1 ton,
Max travel of ram : 1200 mm,
Distance between column : 560 mm,
Distance between guides : 500 mm,
Min. height of die upper : 110 mm,
Min. height of die lower : 110 mm,
Cylinder dia : 280 mm,
Piston rod dia : 120 mm,
Min. height of die : 220 mm,
Saw block height : 660 mm,
Weight of anvil block : 20.37 ton,
Hammer weight : 30.7 ton,
Dimensions : 2380 x 1390 x 5045 mm,
Quantity No. : 2,
 
  7
IDNI6610
MakeHuta Zygmunt,Polish
ModelMPM3150B
YOM
ConditionGood working condition
PhotoSee Photo  |  See Video
Capacity : 1 tons,
Precussive energy: 3600 mkg,
Ram weight: 1250 kg,
Mode of operation: pneumatic,
Table size (front to back): 700 mm,
Stroke: 800 mm,
Strokes / min: 10,
Working pressure: 5 — 7 atm,
Max. weight of upper die: 400 kg,
Die height: 220 mm,
Ram (front to back): 500 mm,
Air consumption: 15 m3 / min,
Anvil weight: 24 tons,
Height of machine above floor: 3750 mm,
Total machine’s height: 4380 mm,
Total weight: 35 tons.
Extra Cost available Induction Heater & Compressor
350 KW Induction Heating Inductotherm make @ Rs 30 lakhs
1000 CFM Compressor @ Rs 10 lakhs
 
  8
IDNA30838
MakeHuta Zygmunt,Polish
ModelMPM6300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2.5 tons,
Energy of blow : 7000 kg.m,
Weight of falling ram : 2500 Kg,
Max. Tup stroke : 850 mm,
Guideway spacing : 650 mm,
Length of die seat in the tup : 650 mm,
Length of die seat in the cushion : 900 mm,
Min. Height of the die (without dovetail) : 300 mm,
Max. Weight of upper die : 800 Kg,
Stroking rate : 100 s.p.m.,
Steam or incoming air pressure : 5-7 Kg/cm2,
Average steam consumption : 970 Kg/h,
Average air consumption : 18 m3/mm,
Height above the floor : 4100 mm,
Total height : 5145 mm,
Weight of anvil : 47.5 ton,
Total weight of the hammer : 64 tons.t
 
  9
IDNA30837
MakeKramatorsk
ModelMA2150
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 10 ton,
Nominal weight of falling parts : 10 ton,
Blow energy : 310 kJ,
Ram stroke length : 1400 mm,
Die height : 450 mm,
Distance between columns (guides) : 1000 mm,
Depth of ram : 1180 mm,
Length of die holder : 1320 mm,
Nominal weight of top die : 1000 kg.
 
  10
IDNA30792
MakeHuta Zygmunt,Polish
ModelMPM6300
YOM1980s
ConditionGood Condition
PhotoSee Photo
Capacity : 2.5 tons,
Ram stroke : 850 mm,
Energy of full blow : 7000 kgm,
Quantity of stroke : 100 u/min,
Distance between Guide : 650 mm
Cylinder diameter : 400 mm
Anvil size : 3100 x 1100 mm
Mass of anvil block : 47,5 tons,
Mass of hammer with anvil block : 64 tons.
One spare Ram available.
 
  11
IDNA30790
MakeKramatorsk
ModelM2150
YOM
ConditionComplete,very good condition
PhotoSee Photo
Capacity : 10 tons,
Ram hammer weight : 10 tons,
Impact capacity : 26000 kgm,
Number of strokes : 30 / min,
Stroke : 1400 mm,
Distance between columns : 1000 mm,
Ram head width : 1180 mm,
Die holder front to back : 1320 mm,
Between table and rams : 450 mm,
Required air pressure : 7 — 9 bar/atm,
Height over floor : 7,24 mm,
Anvil weight, in two parts : 200 tons.
 
  12
IDNA30763
MakeHuta Zygmunt,Polish
ModelMPM1600B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 0.75 tons.
Energy of blow : 18.4 KJ,
Weight of falling part (without die) : 690 kg,
Max weight of upper die : 200 kg,
Weight of anvil block without die holder : 12.5 tons,
Weight of hammer with anvil block : 22 tons,
Approximate forging weight : 0.5-1 kg,
Average steam consumption : 380 kg/h,
Average air consumption cold : 10 m3/min,
Average air consumption hot : 7 m3/min,
Number of blows per minute : 120 1/min,
Overall dimensions :
Length of hammer : 2100 mm,
Width of hammer : 1185 mm,
Total height of hammer : 3850 mm,
Height of hammer : 3440 mm,
Min height of die partition above floor : 800 mm,
Min height of the die (without tail) : 180 mm,
Guidway spacing : 418 mm,
Length of the die seat in the tup : 400 mm,
Length of the seat in the die holder : 600 mm,
Max width of working area : 450 mm,
Max tup stroke : 750 mm.
 
  13
IDNI6600
MakeHuta Zygmunt,Polish
ModelMPM6300B
YOM
ConditionGood working condition
PhotoSee Photo  |  See Video
Capacity : 2.5 tons,
Energy of blow : 70 kJ,
Weight of falling part : 2496 kg,
Max weight of upper die : 800 kgs,
Anvil block weight w/o die holder : 47.5 tons,
Weight of hammer with anvil block : 72.5 tons,
Approximate forging weight : 1.5-7 kg,
Steam of incoming air pressure : 0.5-0.7 MPa,
Average Steam consumption : 970 kg/h,
Average cold air consumption : 24 m3/min,
Average hot air consumption : 18 m3/min,
Number of blows per minute : 100 1/min,
Overall dimension :
Length of hammer : 3100 mm,
Width of hammer : 1730 mm,
Total height of hammer : 5145 mm,
Height of hammer above floor : 4100 mm,
Min height of die partition above : 780 mm,
Min height of the die (without tail) : 300 mm,
Guideway spacing : 636 mm,
Length of die seat : 650 mm,
Length of the seat in the die holder : 900 mm,
Max width of working area : 650 mm,
Max tup stroke : 850 mm.
Full Recondition in 2019.
With Spare Ram.
 
  14
IDNA30687
MakeHuta Zygmunt,Polish
ModelMPM3150B
YOM
ConditionGood working condition
PhotoSee Photo  |  See Video
Capacity : 1 tons,
Precussive energy: 3600 mkg,
Ram weight: 1250 kg,
Mode of operation: pneumatic,
Table size (front to back): 700 mm,
Stroke: 800 mm,
Strokes / min: 10,
Working pressure: 5 — 7 atm,
Max. weight of upper die: 400 kg,
Die height: 220 mm,
Ram (front to back): 500 mm,
Air consumption: 15 m3 / min,
Anvil weight: 24 tons,
Height of machine above floor: 3750 mm,
Total machine’s height: 4380 mm,
Total weight: 35 tons.
 
  15
IDNA30685
MakeHuta Zygmunt,Polish
ModelMPM2000A
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2.5 ton,
Weight of falling part: 2480 kg,
Stroke length: 950 mm,
Distance between guides: 600 mm,
Max weight of upper stamp: 800 kg,
Height of stamp above the floor: 780 mm,
Blow energy: 7000 kgm,
Max. blows per minute: 100,
Air pressure: 6-8 kg / cm2,
Cylinder dia: 540 mm,
Total weight: 62,5 tons.
 
  16
IDNA30684
MakeHuta Zygmunt,Polish
ModelMPM3150
YOM
ConditionGood working condition
PhotoSee Photo
Capacity: 1 tons,
Stroke rate: 110 spm,
Total height: 4380 mm,
Energy of blow: 3600 kg.m,
Max. tup stroke: 800 mm,
Weight of anvil: 24 tons,
Guideway spacing: 550 mm,
Weight of falling ram: 1250 Kg,
Height above the floor: 3750 mm,
Average air consumption: 12 m3/mm,
Max. weight of upper die: 400 Kg,
Average steam consumption: 650 kg/h,
Total weight of the hammer: 35 tons.
Length of die steam in the tup: 500 mm,
Steam or incoming air pressure: 5-7 Kg/cm2,
Length of die steam in the cushion: 700 mm,
Min.height of the die (without doveta): 220 mm.
 
  17
IDNA30683
MakeHuta Zygmunt,Polish
ModelMPM3000
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 3.5 ton,
Max. Impact energy: 9500 kGm,
Weight of the falling part of: 3570 kg
Stroke : 1000 mm,
Max. Number of jumps per minute: 90,
Length x width x height: 3620 x 2100 x 4700 mm,
The spacing of the guides: 660 mm,
Dimensions of anvils length x width: 550 x 450 mm,
Weight: 100,000 kg,
Power supply: compressed air 28 m3 / min,
Compressed air pressure: 5-7 bar,
The maximum weight of the forgings is: 4.0 - 24 kg.
 
  18
IDNA30682
MakeTMP Voronezh Russia
ModelM2145
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 3.15 tons,
Nominal mass of drop parts : 3150 kg,
Rated striking energy :80 KJ,
Max. no. of blows/min. : 56,
Ram stroke : 1250 mm,
Uprights distance : 710 mm,
Ram dimensions : 750 mm,
Die holder : 1000 mm,
Min. die holder to ram distance : 340 mm,
Steam/air pressure : 0.7-0.9 MPa,
Mass (less anvil block) : 25 tons,
Mass of anvil block : 63 tons.
 
  19
IDNA30681
MakeHuta Zygmunt,Polish
ModelMPM500
YOM
ConditionGood working condition
PhotoSee Photo
Capacity: 0.5 ton,
Blow energy: 1800 mkg,
Stroke: 850 mm,
Weight of falling parts: 590 kg,
Number of strokes per minute: 120 1/min,
Length of die seat in the tup: 360 mm,
Length of die seat in the tup: 600 mm,
Max. weight of upper die: 200 kg,
Anvil weight: 11 ton,
Total weight: 17 ton,
Guideway spacing: 360 mm,
Steam consumption average: 380 kg/h.
 
  20
IDNI6599
MakeHuta Zygmunt,Polish
ModelMPM6300B
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 2.5 tons,
Energy of blow : 70 kJ,
Weight of falling part : 2496 kg,
Max weight of upper die : 800 kgs,
Anvil block weight w/o die holder : 47.5 tons,
Weight of hammer with anvil block : 72.5 tons,
Approximate forging weight : 1.5-7 kg,
Steam of incoming air pressure : 0.5-0.7 MPa,
Average Steam consumption : 970 kg/h,
Average cold air consumption : 24 m3/min,
Average hot air consumption : 18 m3/min,
Number of blows per minute : 100 1/min,
Overall dimension :
Length of hammer : 3100 mm,
Width of hammer : 1730 mm,
Total height of hammer : 5145 mm,
Height of hammer above floor : 4100 mm,
Min height of die partition above : 780 mm,
Min height of the die (without tail) : 300 mm,
Guideway spacing : 636 mm,
Length of die seat : 650 mm,
Length of the seat in the die holder : 900 mm,
Max width of working area : 650 mm,
Max tup stroke : 850 mm.
 
  21
IDNA30657
MakeOTANI
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1.35 ton,
Energy of blow : 1350 kg,
Table : 530 x 550 mm.
 
  22
IDNI6597
MakeHuta Zygmunt,Polish
ModelMPM6300A
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2.5 tons,
Weight of Falling part (without die) :-2490 Kg,
Height of hammer above Floor :- 4100 mm,
Weight of anvil block without die Holder :-47.5 tons,
Height of hammer above floor :-4100 mm,
Guide way spacing :-600 mm
Length of die seat in Tup :-650 mm,
Length of seat in the die holder:-900 mm,
Max tup stroke:-850 mm.
With Trimming Press are :
Make:- Wilkins & Mitchell Limited,
model : D4B-S4-8,
Press capacity:-200 tons,
Stroke :-203 mm,
Stroke per minutes :- 40,
Slide Left to Right :- 1175 mm,
Slide front to Back :- 700 mm,
Table size left To Right :- 1180 mm,
Table Size Front to Back :- 840 mm.
 
  23
IDNA30641
MakeEumuco,Germany
Model-
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 6.3 tons.
 
  24
IDNA30483
MakeTMP Voronezh Russia
ModelM2145
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 3.15 tons,
Rated striking energy : 80 KJ,
Max. no. of blows/min. : 60,
Ram stroke : 1250 mm,
Uprights distance : 710 mm,
Ram dimensions : 750 mm,
Die holder : 1000 mm,
Min. Die holder to ram distance : 340 mm,
Steam/air pressure : 0.7-0.9 MPa,
Dimensions : 3820 x 1800 x 5340 mm,
Mass (less anvil block) : 25 tons,
Mass of anvil block : 63 tons
 
  25
IDNA30482
MakeKramatorsk
ModelM2147
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity : 5 tons,
Impact energy : 125 kj,
Ram stroke : 1300 mm,
No. of blows :50 per min.,
Distance clear between guides : 800 mm,
Ram front to back dimensions : 950 mm,
Die holder front to back dimensions :1180 mm,
Bottom die impression to floor distance : 700 mm,
Minimum die holder to ram distance : 400 mm,
Steam (air) pressure : 0.7-0.9 MPa,
Overall dimensions: 3700 x 2000 x 6470 mm,
Mass (less anvil block) approx. : 40 tons,
Mass of anvil block approx. : 99 tons,
Total weight : 140 tons.
 
  26
IDNA30424
MakeRussian
ModelM212
YOM1978
ConditionGood Condition
PhotoSee Photo
Capacity : 2 tons,
Impact energy : 50 kj,
Max. no. of blows : 70 per minute,
Max. ram stroke : 1200 mm,
Distance clear between guides : 600 mm,
Ram front-to-back dimensions : 670 mm,
Die-holder front-to-back dimensions : 900 mm,
Bottom die impression-to-floor distance : 800 mm,
Minimum die holder-to-ram distance : 260 mm,
Steam (air) pressure : 0.6-0.8 MPa,
Overall dimensions : floor space 3650 x 1660 mm,
Height above floor level : 5310 mm,
Mass (less anvil block) approx : 18 tons,
Mass of anvil block approx : 40 tons.
 
  27
IDNA30420
MakePensotti,Italy
Model
YOM
ConditionGood Condition
PhotoSee Photo
Hammer Forging Penumatic
Make : Pensotti,
Capacity : 10 tons,
Ram length : 1450 mm
Depth of dowtail : 100 mm
Anvil in 3 pcs
Sow block length : 1850 mm
Weight : 300 tons
Total weight : 458 tons
Trimming Press
Make : Verson,
Capacity : 1250 tons,
 
  28
IDNA30407
MakeRussian
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2 tons,
Impact energy : 50 kj,
Max. no. of blows : 70 per minute,
Max. ram stroke : 1200 mm,
Distance clear between guides : 600 mm,
Ram front-to-back dimensions : 670 mm,
Die-holder front-to-back dimensions : 900 mm,
Bottom die impression-to-floor distance : 800 mm,
Minimum die holder-to-ram distance : 260 mm,
Steam (air) pressure : 0.6-0.8 MPa,
Overall dimensions : floor space 3650 x 1660 mm,
Height above floor level : 5310 mm,
Mass (less anvil block) approx : 18 tons,
Mass of anvil block approx : 40 tons.
 
  29
IDNI6575
MakeKramatorsk
ModelM2147
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 5 tons,
Impact energy : 125 kj,
Ram stroke : 1300 mm,
No. of blows : 50 per min.,
Distance clear between guides : 800 mm,
Ram front to back dimensions : 950 mm,
Die holder front to back dimensions :1180 mm,
Bottom die impression to floor distance : 700 mm,
Minimum die holder to ram distance : 400 mm,
Steam (air) pressure : 0.7-0.9 MPa,
Overall dimensions : 3700 x 2000 x 6470 mm,
Mass (less anvil block) approx. : 40 tons,
Mass of anvil block approx. : 99 tons,
Total weight : 140 tons.
With Trimming Press :
Make : Basant
Capacity : 500 tons.
 
  30
IDNI6573
MakeHungarian
ModelCM6300
YOM1987
ConditionGood Condition
PhotoSee Photo
Analogue of Huta Zgmunt Hammer MPM 16000B
Capacity : 6.2 tons,
Maximum energy of impact at maximum stroke : 17500 kgm,
Maximum working stroke of ram : 1000 mm,
Number of blows per minute : 80,
Guideway spacing : 850 mm,
Length of die seat in the tup : 900 mm,
Length of die seat in the die holder : 1250 mm,
Min. height of the die (without tail) : 400 mm,
Max. weight of upper die : 1.8 tons,
Min. height of die partition above floor : 740 mm,
Steam or Incoming air pressure : 5-7 atm,
Average steam consumption : 1600 Kg/h,
Average air consumption : 30 m3/min,
Height of hammer above floor : 5000 mm,
Total height of hammer : 7500 mm,
Weight of anvil block without die holder : 120 tons,
Weight of hammer with anvil block : 168 tons.
 
  31
IDNA30360
MakeHuta Zygmunt,Polish
ModelMPM6300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2.5 tons,
Power of typing: 7000 Kg / m,
Weight of the falling weight: 2500 Kg,
Max weight of upper die : 800 kgs,
Anvil block weight w/o die holder : 47.5 tons,
Weight of hammer with anvil block : 72.5 tons,
Approximate forging weight : 1.5-7 kg,
Steam of incoming air pressure : 0.5-0.7 MPa,
Average Steam consumption : 970 kg/h,
Average cold air consumption : 24 m3/min,
Average hot air consumption : 18 m3/min,
Number of blows per minute : 100 1/min,
Overall dimension :
Length of hammer : 3100 mm,
Width of hammer : 1730 mm,
Total height of hammer : 5145 mm,
Height of hammer above floor : 4100 mm,
Min height of die partition above : 780 mm,
Min height of the die (without tail) : 300 mm,
Guideway spacing : 636 mm,
Length of die seat : 650 mm,
Length of the seat in the die holder : 900 mm,
Max width of working area : 650 mm,
Max tup stroke : 850 mm,
Total hammer weight: 64 tons.
 
  32
IDNA30355
MakeRussian
ModelMB2145
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity : 3.15 tons,
Rated striking energy : 80 KJ,
Max. no. of blows/min. : 60,
Ram stroke : 1250 mm,
Uprights distance : 710 mm,
Ram dimensions : 750 mm,
Die holder : 1000 mm,
Min. Die holder to ram distance : 340 mm,
Steam/air pressure : 0.7-0.9 MPa,
Dimensions : 3820 x 1800 x 5340 mm,
Mass (less anvil block) : 25 tons,
Mass of anvil block : 63 tons.
 
  33
IDNA30250
MakeHuta Zygmunt,Polish
ModelMPM10000B
YOM1980
ConditionGood Condition
PhotoSee Photo
Forging Hammer CM3150 (3,15 to) made by Progresul Braila - Romania
Capacity : 3.5 tons
Max. stroke : 900 mm,
Energy of blow : 110 kJ,
Weight of falling part : 3850 kgs,
Max weight of upper die : 1100 kgs,
Anvil block weight w/o die holder : 75 tons,
Weight of hammer with anvil block : 103 tons,
Approximate forging weight : 5-18 kg,
Steam of incoming air pressure : 0.5-0.7 MPa,
Average Steam consumption : 1200 kg/h,
Average cold air consumption : 28 m3/min,
Average hot air consumption : 22 m3/min,
Number of blows per minute : 90 / pm,
Overall dimension :
Length of hammer : 3620 mm,
Width of hammer : 2100 mm,
Total height of hammer : 5930 mm,
Height of hammer above floor : 4700 mm,
Min height of die partition above : 780 mm,
Min height of the die (without tail) : 350 mm,
Guideway spacing : 704 mm,
Length of die seat : 750 mm,
Length of the seat in the die holder : 1050 mm,
Max width of working area : 750 mm,
Max tup stroke : 900 mm,
The total weight of the hammer, including the spare parts is about : 105 ton,
The weight of the bed : 70 ton.
With extra unused ram.
Technical documentation is available.
 
  34
IDNI6554
MakeHuta Zygmunt,Polish
ModelMPM10000B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 3.5 tons
Energy of blow : 110 kJ,
Weight of falling part : 3850 kgs,
Max weight of upper die : 1100 kgs,
Anvil block weight w/o die holder : 75 tons,
Weight of hammer with anvil block : 103 tons,
Approximate forging weight : 5-18 kg,
Steam of incoming air pressure : 0.5-0.7 MPa,
Average Steam consumption : 1200 kg/h,
Average cold air consumption : 28 m3/min,
Average hot air consumption : 22 m3/min,
Number of blows per minute : 90 / pm,
Overall dimension :
Length of hammer : 3620 mm,
Width of hammer : 2100 mm,
Total height of hammer : 5930 mm,
Height of hammer above floor : 4700 mm,
Min height of die partition above : 780 mm,
Min height of the die (without tail) : 350 mm,
Guideway spacing : 704 mm,
Length of die seat : 750 mm,
Length of the seat in the die holder : 1050 mm,
Max width of working area : 750 mm,
Max tup stroke : 900 mm.
 
  35
IDNI6549
MakeRussian
ModelM2150
YOM
ConditionGood Condition
PhotoSee Photo  |  See Video
Capacity 10 tons,
Weight of the ram : 10 tons,
Blow energy : 26000 Kgm,
Speed : 30 stroke/minute,
Stroke : 1400 mm,
Distance between guides : 1000 mm,
Ram surface : 1180 x 1180 mm,
Surface die support : 1320 x 1320 mm,
Overall dimensions : 4400 x 2700 x 7238 mm,
Weight of the base : 200 tons,
Total weight : 284 tons.
 
  36
IDNI6542
MakeOTANI
ModelNew-Max-150S
YOM1981
ConditionGood Condition
PhotoSee Photo
Capacity : 2.2 ton,
Dropping section weight : 2250 Kg,
Normal die weight : 450 Kg,
Maximum stroke : 950 mm,
Guide distance : 590 mm,
Minimum die thickness : 350 mm,
Ram bottom surface size : 570 x 550 mm,
Inlet pipe compressor capacity : 110 Kw,
Maximum air pressure : 7 Kg/sq. cm,
Weight : 40 ton,
Total weight : 85 tons.
 
  37
IDNA30137
MakeRussian
ModelK05.501
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1.6 ton,
Nominal mass of drop parts: 1600 kg
Strike energy: 40 kJ,
Max number of blows per 1 min: 70,
Distance clear between guides: 520 mm,
Ram front-to-back dimensions: 540 mm,
Die-holder front-to-back dimensions: 600 mm,
Min die holder-to-ram distance: 220 mm,
Steam (air) pressure: 0.6-0.8 MPa,
Weight of anvil block: 32 ton,
Total weight of the hammer with anvil block: 41 ton,
 
  38
IDNA30136
MakeRussian
ModelM2145
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 3.15 tons,
Nominal mass of drop parts: 3150 kg
Rated striking energy : 80 KJ,
Max. no. of blows/min. : 60,
Ram stroke : 1250 mm,
Uprights distance : 710 mm,
Ram dimensions : 750 mm,
Die holder : 1000 mm,
Bottom die impression-to-floor distance: 800 mm,
Min. Die holder to ram distance : 340 mm,
Steam/air pressure : 0.7-0.9 MPa,
Dimensions : 3820 x 1800 x 5340 mm,
Mass (less anvil block) : 25 tons,
Mass of anvil block : 63 tons,
Total weight of the hammer with anvil block: 88 ton.
 
  39
IDNA30135
MakeRussian
ModelM2147
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 5 tons,
Impact energy : 125 kj,
Ram stroke : 1300 mm,
No. of blows :50 per min.,
Distance clear between guides : 800 mm,
Ram front to back dimensions : 950 mm,
Die holder front to back dimensions :1180 mm,
Bottom die impression to floor distance : 700 mm,
Minimum die holder to ram distance : 400 mm,
Steam (air) pressure : 0.7-0.9 MPa,
Overall dimensions: 3700 x 2000 x 6470 mm,
Mass (less anvil block) approx. : 40 tons,
Mass of anvil block approx. : 99 tons,
Total weight : 140 tons.
 
  40
IDNA30124
MakeHuta Zygmunt,Polish
ModelMPM500
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 0.5 ton,
Blow energy: 1800 mkg,
Stroke: 850 mm,
Weight of falling parts : 590 kg,
Number of strokes per minute: 120 1/min,
Length of die seat in the tup : 360 mm,
Length of die seat in the tup : 600 mm,
Max. weight of upper die : 200 kg,
Anvil weight: 11 ton,
Total weight: 17 ton,
Guideway spacing: 360 mm,
Steam consumption, average : 380 kg/h,
Mode of operation: pneumatic.
 
  41
IDNA30122
MakeBanning
ModelGOA3150
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2 ton,
Blow energy : 4000 mkg,
Use able number of blows : max. 125 min^-1,
Ram stroke : 520 mm,
Die height : 350 mm,
Ram weight : 1760 kg,
Ram (front to back) : 530 mm,
Dimensions : 2250 x 1400 mm ( L x B ),
Height of machine above floor : 3300 mm,
Height of machine under floor : 590 mm,
Total weight : 40.5 tons.
 
  42
IDNA30121
MakeBanning
ModelGOA2000
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1 tons,
Max. Blow energy : 2500 mkg,
Use able number of blows : max. 135 min^-1,
Ram stroke : 480 mm,
Die height : 310 mm,
Ram weight : 1120 kg,
Ram (front to back) : 450 mm,
Distance between the guidelines : 500 mm,
Dimensions ( L x B ) : 1900 x 1200 mm,
Height of machine above floor : 3200 mm,
Height of machine under floor : 400 mm,
Total weight : 26 tons.
 
  43
IDNA30089
MakeBraila - Romania
ModelCM3150
YOM1980
ConditionGood Condition
PhotoSee Photo
Capacity : 3 tons,
Maximum energy of impact at maximum stroke : 10000 kgm,
Ram weight : 3150 kg,
Stroke : 900 mm,
Number of blows per minute : 90,
Working pressure : 5 - 7 bar,
Overall dimension (LxWxH) : 3300 x 2000 x 5900 mm,
Hammer Weight : 96 tons.
The hammer is delivered with additional new Spare Ram,
The total weight of the hammer, including the spare parts is about 105 ton,
The weight of the bed is 70 tons,
Mode of operation : pneumatic,
Technical documentation is available.
 
  44
IDNA30053
MakeTMP Voronezh Russia
ModelM213
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 3.15 tons,
Impact energy 8000 kgf-m,
Max. working stroke of ram : 1250 mm,
No. of die strokes : 60 per min.,
Distance clear between guide ways : 710 mm,
Ram dimensions (F-B) : 800 mm,
Dimensions of die holder (F-B) : 1000 mm,
Min. distance from ram to die-holder : 340 mm,
Steam (air) pressure from ram to die holder : 7-9 mm,
Overall dimensions : 4100 x 1900 x 5780 mm,
Weight of anvil : 63 tons,
Total weight of hammer : 89 tons.
 
  45
IDNA30052
MakeRussian
ModelM212
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2 tons,
Impact energy : 50 kj,
Max. no. of blows : 70 per minute,
Max. ram stroke : 1200 mm,
Distance clear between guides : 600 mm,
Ram front-to-back dimensions : 670 mm,
Die-holder front-to-back dimensions : 900 mm,
Bottom die impression-to-floor distance : 800 mm,
Minimum die holder-to-ram distance : 260 mm,
Steam (air) pressure : 0.6-0.8 MPa,
Overall dimensions : floor space 3650 x 1660 mm,
Height above floor level : 5310 mm,
Mass (less anvil block) approx : 18 tons,
Mass of anvil block approx : 40 tons.
 
  46
IDNA30051
MakeRussian
ModelM211
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1 ton,
Max travel of ram : 1200 mm,
Distance between column : 560 mm,
Distance between guides : 500 mm,
80 SPM,
Min. height of die upper : 110 mm,
Lower : 110 mm,
Cylinder dia : 280 mm,
Piston rod dia : 120 mm,
Air steam pressure : 7=9 atmospheres,
Min. height of die : 220 mm,
Saw block height : 660 mm,
Weight of anvil block : 20.37 tons,
Hammer weight : 30.7 tons,
Dimensions : 2380 x 1390 x 5045 mm.
 
  47
IDNI6516
MakeHuta Zygmunt,Polish
ModelMPM500
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 0.5 ton,
Blow energy: 1800 mkg,
Stroke: 850 mm,
Weight of falling parts : 590 kg,
Number of strokes per minute: 120 1/min,
Length of die seat in the tup : 360 mm,
Length of die seat in the tup : 600 mm,
Max. weight of upper die : 200 kg,
Anvil weight: 11 ton,
Total weight: 17 ton,
Guideway spacing: 360 mm,
Steam consumption, average : 380 kg/h,
Mode of operation: pneumatic.
 
  48
IDNA29986
MakeErie
Model
YOM1996
ConditionGood Condition
PhotoSee Photo
Capacity : 6 tons,
Cylinder Bore : 550 mm,
Max Stroke : 1250 mm,
Distance from Ram to Sow Block : 500 mm,
Distance between Guides : 750 mm,
Ram Front Back : 900 mm,
Front Back : 1775 mm,
Left Right : 3500 mm,
Height above floor Ft & In : 21-0,
Head room to drop in rod Ft. & In : 31-7.
 
  49
IDNA29908
MakeTMP Voronezh Russia
ModelM213
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 3.15 tons,
Impact energy 8000 kgf-m,
Max. working stroke of ram : 1250 mm,
No. of die strokes : 60 per min.,
Distance clear between guide ways : 710 mm,
Ram dimensions (F-B) : 800 mm,
Dimensions of die holder (F-B) : 1000 mm,
Min. distance from ram to die-holder : 340 mm,
Steam (air) pressure from ram to die holder : 7-9 mm,
Overall dimensions : 4100 x 1900 x 5780 mm,
Weight of anvil : 63 tons,
Total weight of hammer : 68 tons.
Falling parts.
 
  50
IDNI6503
MakeHuta Zygmunt,Polish
ModelMPM16000B
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 6 tons,
Energy of blow : 175 kJ,
Weight of falling part : 6265 kg,
Max. weight of upper die : 1600 kg,
Weight of anvil block without die holder : 120 tons,
Weight of hammer with anvil block : 168 tons,
Approximate forging weight : 15-45 kg,
Steam of incoming air pressure : 0.5-0.7 MPa,
Average steam consumption : 1600 kg/h,
Average cold air consumption : 38 m3/min,
Average hot air consumption : 30 m3/min,
Number of blows per minute : 80 1/min,
Overall dimension :
Length of hammer : 4080 mm,
Width of hammer : 2400 mm,
Total height of hammer : 7580 mm,
Height of hammer above floor : 5180 mm,
Min height of die partition above : 740 mm,
Min height of the die (without tail) : 400 mm,
Guideway spacing 834 mm
Length of die seat : 900 mm,
Length of the seat in the die holder : 1250 mm,
Max width of working area : 850 mm,
Max tup stroke : 1100 mm.
 
  51
IDNA29849
MakeKramatorsk
Model17KP
YOMretrofit in 2008
ConditionComplete,very good condition
PhotoSee Photo  |  See Video
Capacity : 5 tons,
Nominal weight of falling parts : 5000 Kg,
Actual mass of dropping parts without the Upper tool : 5080 kg,
Kinetic energy of the falling parts : 12500 kg min.,
Number of strikes per min: 50
Hammer stroke (max.) : 1300 mm,
Die block height (min.) : 400 mm,
Clear distance between guides : 700 mm,
Length of the hammer block (at direction, Perpendicular to hammer front) : 950 mm,
Length of the die holder (at direction, Perpendicular to hammer front) : 1180 mm,
Steam pressure before an admission to The cylinder : 7.. 9 atm,
Nominal weight of the upper tool : 500 kg,
Max weight of the upper tool : 1500 kg,
Max admitted temperature of steam : degr. C 200,
Overall dimensions of the hammer :
Length : 3700 mm,
Width : 2000 mm,
Height : 8770 mm,
Weight : 140 tons,
Anvil weight : 100 tons.
 
  52
IDNI6477
MakeRussian
ModelM211
YOM1963
ConditionGood Condition
PhotoSee Photo
Capacity : 1 ton,
Max travel of ram : 1200 mm,
Distance between column : 560 mm,
Distance between guides : 500 mm,
80 SPM,
Min. height of die upper : 110 mm,
Lower : 110 mm,
Cylinder dia : 280 mm,
Piston rod dia : 120 mm,
Air steam pressure : 7=9 atmospheres,
Min. height of die : 220 mm,
Saw block height : 660 mm,
Weight of anvil block : 20.37 tons,
Hammer weight : 30.7 tons,
Dimensions : 2380 x 1390 x 5045 mm.
With compressor 450 CFM Chicago Pneumatic & tank.
 
  53
IDNA29740
MakeHuta Zygmunt,Polish
ModelMPM1600
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 0.75 tons.
Energy of blow : 18.4 KJ,
Weight of falling part (without die) : 690 kg,
Max weight of upper die : 200 kg,
Weight of anvil block without die holder : 12.5 tons,
Weight of hammer with anvil block : 22 tons,
Approximate forging weight : 0.5-1 kg,
Average steam consumption : 380 kg/h,
Average air consumption cold : 10 m3/min,
Average air consumption hot : 7 m3/min,
Number of blows per minute : 120 1/min,
Overall dimensions :
Length of hammer : 2100 mm,
Width of hammer : 1185 mm,
Total height of hammer : 3850 mm,
Height of hammer : 3440 mm,
Min height of die partition above floor : 800 mm,
Min height of the die (without tail) : 180 mm,
Guidway spacing : 418 mm,
Length of the die seat in the tup : 400 mm,
Length of the seat in the die holder : 600 mm,
Max width of working area : 450 mm,
Max tup stroke : 750 mm.
 
  54
IDNA29739
MakeHuta Zygmunt,Polish
ModelMPM3150
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1 tons,
Energy of blow : 3600 kg.m,
Weight of falling ram : 1250 Kg,
Max. Tup stroke : 800 mm,
Guideway spacing : 550 mm,
Length of die steam in the tup : 500 mm,
Length of die steam in the cushion : 700 mm,
Min.height of the die (without doveta) : 220 mm,
Max. weight of upper die : 400 Kg,
Stroke rate : 110 spm,
Steam or incoming air pressure : 5-7 Kg/cm2,
Average steam consumption: 650 kg/h,
Average air consumption : 12 m3/mm,
Height above the floor : 3750 mm,
Total height : 4380 mm,
Weight of anvil : 24 tons,
Total weight of the hammer : 35 tons.
 
  55
IDNA29738
MakeHuta Zygmunt,Polish
ModelMPM6300
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 3 tons,
Energy of blow : 7000 kg.m,
Weight of falling ram : 2500 Kg,
Max. Tup stroke : 850 mm,
Guideway spacing : 650 mm,
Length of die steam in the tup : 650 mm,
Length of die steam in the cushion : 900 mm,
Min.height of the die (without doveta) : 300 mm,
Max. weight of upper die : 800 Kg,
Stroke rate : 100 spm,
Steam or incoming air pressure : 5-7 Kg/cm2,
Average steam consumption: 970 kg/h,
Average air consumption : 18 m3/mm,
Height above the floor : 4100 mm,
Total height : 5145 mm,
Weight of anvil : 475 tons,
Total weight of the hammer : 64 tons.
 
  56
IDNA29708
MakeRussian
ModelMB2145
YOM1983
ConditionGood working condition
PhotoSee Photo
Capacity : 3.15 tons,
Striking energy : 8000 KPM,
Rate of striking of hammer : 50/min,
Working stroke of hammer : 1250 mm,
Bearing distance between guidance : 2700 mm,
Space of working area : 630 mm,
Dimensions from upper anvil block till floor : 750 mm,
Vapour pressure before inlet 7-9 kp/cm2,
Air pressure before inlet : 6-8 kp/cm2,
Outlet pressure of vapour and air : 0,2-0,5 kp/cm2,
Dia of piston rod : 175 mm,
Dia of cylinder : 460 mm,
Dimensions of hammer : 5100 x 2490 x 5895 mm,
Anvil weight : 47 tons,
Weight of hammer : 75 tons.
 
  57
IDNA29707
MakeRussian
ModelM211
YOM1971
ConditionExcellent
PhotoSee Photo
Capacity : 1 ton,
Max travel of ram : 1200 mm,
Distance between column : 560 mm,
Distance between guides : 500 mm,
80 SPM,
Min. height of die upper : 110 mm,
Lower : 110 mm,
Cylinder dia : 280 mm,
Piston rod dia : 120 mm,
Air steam pressure : 7=9 atmospheres,
Min. height of die : 220 mm,
Saw block height : 660 mm,
Weight of anvil block : 20.37 tons,
Hammer weight : 30.7 tons,
Dimensions : 2380 x 1390 x 5045 mm.
 
  58
IDNA29706
MakeRussian
ModelM2143
YOM1979
ConditionExcellent
PhotoSee Photo
Capacity : 2 ton,
Impact energy : 50 kJ,
Max. no. of blows per min : 70,
Max. ram stroke : 1200 mm,
Distance clear between guides : 600 mm,
Ram front-to-back dimensions : 670 mm,
Die holder front-to-back dimensions : 900 mm,
Bottom die impression-to-floor distance : 800 mm,
Min. die holder-to-ram distance : 260 mm,
Steam (air) pressure : 0.6 - 0.8 MPa,
Overall dimensions : 3650 x 1660 x 5310 mm,
Total weight : 50 tons.
 
  59
IDNI6457
Make
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 350 kg.
 
  60
IDNI6456
Make
Model
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 2 tons
 
  61
IDNA29673
MakeRussian
ModelM212
YOM
ConditionGood working condition
PhotoSee Photo
Capacity : 2 tons,
Impact energy : 50 kj,
Max. no. of blows : 70 per minute,
Max. ram stroke : 1200 mm,
Distance clear between guides : 600 mm,
Ram front-to-back dimensions : 670 mm,
Die-holder front-to-back dimensions : 900 mm,
Bottom die impression-to-floor distance : 800 mm,
Minimum die holder-to-ram distance : 260 mm,
Steam (air) pressure : 0.6-0.8 MPa,
Overall dimensions : floor space 3650 x 1660 mm,
Height above floor level : 5310 mm,
Mass (less anvil block) approx : 18 tons,
Mass of anvil block approx : 40 tons.
 
  62
IDNA29651
MakeRussian
ModelMA2147
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 5 tons,
Impact energy : 125 kj,
Ram stroke : 1300 mm,
No. of blows : 50 per min.,
Distance clear between guides : 800 mm,
Ram front to back dimensions : 950 mm,
Die holder front to back dimensions : 1180 mm,
Bottom die impression to floor distance : 700 mm,
Minimum die holder to ram distance : 400 mm,
Steam (air) pressure : 0.7-0.9 MPa,
Overall dimensions : 3700 x 2000 x 6470 mm,
Mass (less anvil block) approx. : 40 tons,
Mass of anvil block approx. 100 tons.
 
  63
IDNI6451
MakeKyohan,Japan
Model1
YOM1984
ConditionGood working condition
PhotoSee Photo  |  See Video
Capacity : 1 ton,
Weight of the falling parts : 1000 kg,
Blow energy : 12500 kgf.m,
Max no. of ram strokes per minute : 30,
Ram travel : 850 mm,
Distance between columns : 650 mm,
Ram dimensions from front to back : 560 mm,
Die support dimensions from front to back : 690 mm,
Min. Distance between the ram and the die support : 500 mm,
Air(steam) pressure : 6 kgf/cmp,
Overall Dimensions :
Length : 2235 mm,
Width : 750 mm,
Height from the ground : 4800 mm,
Anvil weight(approx.) : 20 tons,
Total weight of the hammer(approx) : 32 tons.
 
  64
IDNA29565
MakeRussian
ModelM2145
YOM1988
ConditionGood Condition
PhotoSee Photo
Capacity : 3.15 tons,
Rated striking energy : 80 KJ,
Max. no. of blows/min. : 60,
Ram stroke : 1250 mm,
Uprights distance : 710 mm,
Ram dimensions : 750 mm,
Die holder : 1000 mm,
Min. Die holder to ram distance : 340 mm,
Steam/air pressure : 0.7-0.9 MPa,
Dimensions : 3820 x 1800 x 5340 mm,
Mass (less anvil block) : 25 tons,
Mass of anvil block : 63 tons.
 
  65
IDNI6432
MakeHuta Zygmunt,Polish
ModelMPM1600B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 0.75 tons.
Energy of blow : 18.4 KJ,
Weight of falling part (without die) : 690 kg,
Max weight of upper die : 200 kg,
Weight of anvil block without die holder : 12.5 tons,
Weight of hammer with anvil block : 22 tons,
Approximate forging weight : 0.5-1 kg,
Average steam consumption : 380 kg/h,
Average air consumption cold : 10 m3/min,
Average air consumption hot : 7 m3/min,
Number of blows per minute : 120 1/min,
Overall dimensions :
Length of hammer : 2100 mm,
Width of hammer : 1185 mm,
Total height of hammer : 3850 mm,
Height of hammer : 3440 mm,
Min height of die partition above floor : 800 mm,
Min height of the die (without tail) : 180 mm,
Guidway spacing : 418 mm,
Length of the die seat in the tup : 400 mm,
Length of the seat in the die holder : 600 mm,
Max width of working area : 450 mm,
Max tup stroke : 750 mm.
 
  66
IDNA29335
MakeTMP Voronezh Russia
ModelM212
YOM1982
ConditionGood working condition
PhotoSee Photo
Capacity : 2 ton
Impact energy : 50 kJ,
Max. no. of blows per min : 70,
Max. ram stroke : 1200 mm,
Distance clear between guides : 600 mm,
Ram front-to-back dimensions : 670 mm,
Die holder front-to-back dimensions : 900 mm,
Bottom die impression-to-floor distance : 800 mm,
Min. die holder-to-ram distance : 260 mm,
Steam (air) pressure : 0.6 - 0.8 MPa,
Overall dimensions : 3650 x 1660 x 5310 mm,
Anvil block's weight : 40 tons,
Weight : 58 tons.
 
  67
IDNI6390
MakeHuta Zygmunt,Polish
ModelMPM1000
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1 ton,
Precussive energy : 3600 mkg,
Ram weight : 1250 kg,
Mode of operation pneumatic,
Table size (front to back) : 700 mm,
Stroke : 800 mm,
Strokes : 10 min,
Working pressure : 5-7 atm,
Max. weight of upper die : 400 kg,
Die height : 220 mm,
Ram (front to back) : 500 mm,
Air consumption : 15 m3/min,
Anvil weight : 24 ton,
Height of machine above floor : 3750 mm,
Total machine height : 4380 mm,
Total weight : 40 tons
Brand New Ram included
 
  68
IDNI6375
MakeMassey,UK
Model
YOM1970s
ConditionGood Condition
PhotoSee Photo
Pneumatic Hammer,
Capacity : 1 ton.
 
  69
IDNA29090
MakeHuta Zygmunt,Polish
ModelMPM3150
YOM
Conditioncomplete,excellent condition
PhotoSee Photo
Capacity : 1 ton,
Energy of blow : 3600 kg.m,
Weight of falling ram : 1250 Kg,
Max. Tup stroke : 800 mm,
Guideway spacing : 550 mm,
Length of die steam in the tup : 500 mm,
Length of die steam in the cushion : 700 mm,
Min.height of the die (without doveta) : 220 mm,
Max. weight of upper die : 400 Kg,
Stroke rate : 110 spm,
Steam or incoming air pressure : 5-7 Kg/cm2,
Average steam consumption: 650 kg/h,
Average air consumption : 12 m3/mm,
Height above the floor : 3750 mm,
Total height : 4380 mm,
Weight of anvil : 24 tons,
Total weight of the hammer : 35 tons.
 
  70
IDNA29000
MakeRussian
ModelM212
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2 tons,
Impact energy : 50 kj,
Max. no. of blows : 70 per minute,
Max. ram stroke : 1200 mm,
Distance clear between guides : 600 mm,
Ram front-to-back dimensions : 670 mm,
Die-holder front-to-back dimensions : 900 mm,
Bottom die impression-to-floor distance : 800 mm,
Minimum die holder-to-ram distance : 260 mm,
Steam (air) pressure : 0.6-0.8 MPa,
Overall dimensions : floor space 3650 x 1660 mm,
Height above floor level : 5310 mm,
Mass (less anvil block) approx. : 18 tons,
Mass if anvil block approx. : 40 tons,
In 2009 the casing, the sleeves, the slide, head stock and die-holder as well as the grinding of head stock guides and the valve of hammer control were replaced. In 2010 it has been stopped due to changes of technological process i.e. the hammer after overhaul on mechanics.
 
  71
IDNA28925
MakeHuta Zygmunt,Polish
ModelMPM1000A
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1.5 tons
Blow energy 3500 mkg,
Stroke : 900 mm,
Number of strokes: 110 min^-1,
Ram weight : 1230 kg,
Length of die seat in the tup : 460 mm,
Length of die seat in the tup : 700 mm,
Weight of upper die Max. : 400 kg,
Anvil weight, without die holder : 22 ton,
Total weight, approx. : 34 ton,
Guideway spacing : 460 mm,
Pressed air consumption : 12 m3/min.,
Steam consumption : 650 Kg/h.
Mode of operation : pneumatic.
 
  72
IDNA26867
MakeHuta Zygmunt,Polish
ModelMPM3150B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1ton,
Energy : 3600 kgm,
Weight of the ram : 1250 kg,
Max. slide stroke : 800 mm,
Light on the guide : 550 mm,
Weight max up die : 400 kg,
Stroke : 110 min,
Weight chabotte without die holder : 24 ton,
Total weight : 35 ton.
 
  73
IDNI5999
MakeHuta Zygmunt,Polish
ModelMPM1600B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 0.75 tons.
Energy of blow : 18.4 KJ,
Weight of falling part (without die) : 690 kg,
Max weight of upper die : 200 kg,
Weight of anvil block without die holder : 12.5 tons,
Weight of hammer with anvil block : 22 tons,
Approximate forging weight : 0.5-1 kg,
Average steam consumption : 380 kg/h,
Average air consumption cold : 10 m3/min,
Average air consumption hot : 7 m3/min,
Number of blows per minute : 120 1/min,
Overall dimensions :
Length of hammer : 2100 mm,
Width of hammer : 1185 mm,
Total height of hammer : 3850 mm,
Height of hammer : 3440 mm,
Min height of die partition above floor : 800 mm,
Min height of the die (without tail) : 180 mm,
Guidway spacing : 418 mm,
Length of the die seat in the tup : 400 mm,
Length of the seat in the die holder : 600 mm,
Max width of working area : 450 mm,
Max tup stroke : 750 mm.
 
  74
IDNA25836
MakeHuta Zygmunt,Polish
ModelMPM1600B
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 0.75 tons.
Energy of blow : 18.4 KJ,
Weight of falling part (without die) : 690 kg,
Max weight of upper die : 200 kg,
Weight of anvil block without die holder : 12.5 tons,
Weight of hammer with anvil block : 22 tons,
Approximate forging weight : 0.5-1 kg,
Average steam consumption : 380 kg/h,
Average air consumption cold : 10 m3/min,
Average air consumption hot : 7 m3/min,
Number of blows per minute : 120 1/min,
Overall dimensions :
Length of hammer : 2100 mm,
Width of hammer : 1185 mm,
Total height of hammer : 3850 mm,
Height of hammer : 3440 mm,
Min height of die partition above floor : 800 mm,
Min height of the die (without tail) : 180 mm,
Guidway spacing : 418 mm,
Length of the die seat in the tup : 400 mm,
Length of the seat in the die holder : 600 mm,
Max width of working area : 450 mm,
Max tup stroke : 750 mm.
 
  75
IDNI5531
MakeBeche
Model4KGL
YOM1982
ConditionAbsolutely New
PhotoSee Photo
Capacity 4 tons,
Ram thickness 500 mm,
height 600 mm,
Die Blockap: between pillar 700 mm,
Input energy 40kj,
Ram dia. 480 mm,
Air receiver tank : 14 feet x 5.5 feet,
with all pipe line & other accessories.
Technical manuals available
 
  76
IDNI4763
MakeChambersburg
Model
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 1 ton (2000 pounds), Stroke 1150 mm, Between guides 475 mm, Ram(front to back)500 mm, Anvil cap(front to back) 650 mm, Inlet 50 mm, Exhuast 50 mm, manuals are available.
top