subscribe newsletter
Subscribe

Category : Forging Equipment

Sub-Category : Hammer Forging Hydraulic

Total Machines Found : 13

Select | Machine Details
 
  1
IDNA30954
MakeEumuco,Germany
ModelMD HOG-10
YOM1969
ConditionGood working condition
PhotoSee Photo  |  See Video
Electro-Hydraulic Drop Forging Hammer
Capacity : 10 ton,
Work resulting a blow: 10,000 kgm (real 80,000kgm),
Stroke : 1270 mm,
Stroke per minutes : 68~90/min
Table size : 480 x 480 mm,
Height of fall: 590 mm,
Weight of ram hammer: 7,800 kg,
Shut height: 330~660 mm,
Clearance distance between guidance: 940 mm,
Depth of ram hammer: 1,000 mm,
Power: 2 x 75 kw,
Weight of anvil bed: 101 ton,
Total height: 8 m,
Height From the Floor: 6.7 m.
Total weight: 143 ton.
 
  2
IDNA30680
MakeBeche
Model31.5 kJ
YOM1989
ConditionComplete
PhotoSee Photo
Capacity : 1.5 tons,
Capacity: 31.5 kJ
Control: S7-300
Drive: 82 kW
Connection voltage: 400 V; 50 Hz
 
  3
IDNI6594
MakeLasco
ModelKH40
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 4 tons,
Blow energy : 4000 mkg,
Ram weight : 4000 kgs
Die height : 400 mm,
Die weight : 670 kgs,
Height of fall : 1200 mm,
Power : 60 kw,
Height of mc above floor : 6100 mm,
Anvil weight : 44000 kgs,
Diameter of anvil : 3200 x 1600 x 1800 mm,
Dimension of the frame : 2900 x 1050 x 1200 mm,
Weight of rh frame : 7900 kgs,
Dimension of lh frame : 2900 x 1050 x 1200 mm,
Weight of lh frame : 7900 kgs,
Total weight : 65 tons.
Operation electro- hydraulic.
 
  4
IDNA30600
MakeBeche
ModelKGH3.15
YOM1997
ConditionGood working condition
PhotoSee Photo
Capacity : 1.5 tons,
Capacity: 31.5 kJ,
Control: S7-300,
Drive: 82 kW,
Connection voltage: 400 V; 50 Hz,
Dimension :
Total height : 6000 mm
Height above the floor level : 5050 mm,
Height below the floor level : 950 mm,
Anvil base (L to R x F to B) : 2320 x 1500 mm
Total weight of the hammer : 468 ton,
The hammer includes spare tup and GERB anti-vibration springs.
 
  5
IDNI6546
MakeChina
Model
YOM
ConditionGood condition dismantled
PhotoSee Photo
Capacity : 3 tons ODF,
Hyd Pressure : 14MPa,
Stroke length : 1200 mm,
Blow Energy : 70 KG,
Stroke per min : 90-120 Nos.
 
  6
IDNA30174
MakeLasco
ModelKGK1600
YOM
ConditionGood Condition
PhotoSee Photo
Double Acting Electro-Hydraulic Drop Hammer Forging
Capacity : 12 tons,
Rated Size : 12000 kgs
Ram Stroke : 1100 mm,
Ram L-to-R : 1100 mm,
Ram F-to-B : 1200 mm,
Anvil L-to-R : 1200 mm,
Anvil F-to-B : 1100 mm
Max Blows per Minute : 70,
Max Weight of Ram : 12000 kgs,
Weight of Lower Anvil : 192000 kgs,
Weight of each side Frame : 25,000 kgs,
Hammer Height above the Floor : 8,000 mm,
Total Hammer weight : 287,000 kgs.
 
  7
IDNA29998
MakeLasco
ModelKH315
YOM1979
ConditionGood working condition
PhotoSee Photo  |  See Video
Capacity : 3 tons,
Working force : 3150 kgm,
Falling height : 1100 mm,
Ram weight : 2900 kg,
Opening between the stands : 700 mm,
Total consumption : 42 kW,
Approx. weight of anvil : 34 tons,
Height above floor : 5600 mm,
Total weight : 64 tons.
 
  8
IDNA29733
MakeZdas
ModelHH30
YOM
ConditionGood Condition
PhotoSee Photo
Energy of blow : 30 kJ,
SPM : 60-65,
Total weight : 35 tons,
Drive unit Electro hydraulic.
 
  9
IDNA29459
MakeLasco
ModelKH315
YOM1980s
ConditionExcellent
PhotoSee Photo
Capacity : 3.15 tons,
Energy of blow : 3150 kgm,
Weight of falling ram : 2900 kg,
Max. weight of die : 530 kg,
Way between slides : 700 mm,
Motor power : 40 KW,
Total height : 6820 mm,
Height above floor : 5600 mm
Weight of anvil : 34 tons
Total weight : 64
The anvil has a crack and therefore has to be efficiently repaired. The price includes this repair. (drilling holes, fixing tie-rods by heat treatment inside the crack to fix and reinforce everything).
The machine is complete, and in good mechanical condition.
 
  10
IDNA28888
MakeSmeral,Czech
ModelKJH4
YOM
ConditionGood Condition
PhotoSee Photo
Capacity : 2 ton,
Ram Weight : 1800 kgs
Ram stroke : 500 mm,
Number of ram strokes 1/min: 48,
Ram impact rated energy : 4000 kgm,
Die camping area : 286 x 600 mm,
Min. Die Height : 350 mm,
Output of main motor : 45 kW,
Length of the machine : 3100 mm,
Width of the machine : 1900 mm,
Height of the machine : 3900 mm,
Weight of the machine : 37 tons.
 
  11
IDNI6294
MakeLasco
ModelKH315
YOM1989
ConditionGood condition dismantled
PhotoSee Photo
Blow work : 31.5 kJ,
Drop weight (ram and die holder) : 2900 kg,
Drop height to reach max. blow energy : 700 mm,
Max. blow frequency at nominal working capacity : 67 1/min,
Die height (without dovetails) at max. blow energy : 400 mm,
Height of die recess without dovetails : 150 mm,
Daylight between guides : 700 mm,
Ram depth : 600 mm,
Height above floor : 5370 mm,
Weight of anvil : 37.5 tons,
Overall weight of the hammer : 70 tons,
Oil quantity in head container : 900 l,
Piston rod : 50 X 2.30 lg
Cylinder-F (daylight) : 160 mm,
Filling pressure : 7 bars,
Slowly "up" : 0.77 m/min,
Operating voltage : 440 V, 3-phase, 60 hz,
Control voltage : 220 V, 60 Hz,
Valve voltage : 24 V - DC
Main drive motor : 60 kW,
Control motor : 1.8 kW,
Lube pump motor : 0.09 kW.
 
  12
IDNA26537
MakeLasco
ModelKH125
YOM
ConditionVery good condition
PhotoSee Photo
Capacity : 1.25 tons,
Height of blow : 1000 mm,
Weight of falling ram : 1.25 tons,
Way between uprights : 480 mm,
Thickness of falling ram : 480 mm,
Motor : 22 kW,
Min height of dies without dovetail : 100 mm,
Total height of hammer over the floor : 5000 mm,
Weight of anvil : 14 tons,
Total weight of hammer : 28 tons.
 
  13
IDNA25637
MakeEumuco,Germany
ModelHOG25a
YOM
ConditionGood Condition
PhotoSee Photo
Prrcussive energy : 2500 mkg,
Ram weight : 1500 kg,
Number of strokes : 60-90 min-1,
Ram front to back : 890 mm,
Drop height: 1000 mm,
Anvil weight approx : 316 ton,
Clearance distance between the guidances : 560 mm,
Total weight approx. : 36,8 t,
Driving power : 30 kW.
top