subscribe newsletter
Subscribe

Category : Forging Equipment

Sub-Category : Cross Wedge Roll

Total Machines Found : 4

Select | Machine Details
 
  1
IDNA30751
MakeSmeral,Czech
ModelULS55
YOM
ConditionGood Condition
PhotoSee Photo
Diameter of work piece : max. 55 mm,
Diameter of roll segment : max. 600 mm,
Width of roll : 500 mm,
Roll revolutions : 8 - 16 min^-1,
Roll adjustment : 25 mm,
Driving power : 55 kW,
Dimensions : 3000 x 2400 x 2300 mm,
Total weight : 118 tons.
 
  2
IDNA30568
MakeRussian
ModelSP4200-2
YOM
ConditionBrand New
PhotoSee Photo
Output capacity, max. passes/hour : 260
Rolled billets dimensions, mm :
- diameter : 5090 mm,
- length with cutting-off wastes : 550 mm,
- length without cutting-off wastes : 750 mm,
3. Upper tool overall dimensions, mm
- width : 500 mm
- length : 2250 mm,
4. Lower tool overall dimensions, mm
- width : 500 mm,
- length : 2200 mm,
5.
Operating stroke of slides, mm, not less
- top : 1950 mm,
- bottom : 2650 mm,
6. Nominal distance between wedge tools : 2600,2 mm
- incremental range : -5,0 mm
- wedging range : +15 mm
7. Hydraulic cylinder power, ton, max
- top : 50 ton,
- bottom : 50 ton,
8. Hydro station reservoir capacity : 2500 dm 3
9. Hydro station electric motor power : 250 kW,
TFC power : 800 kW
Pneumatic system working pressure : MPa 0,5
Compressed air consumption : 4 m3 /min,
Cooling water pressure : 0,30,4 MPa
Cooling water consumption m 3 /hour 4
Water output temperature : 15-35 С
Overall dimensions in complete packaging, mm, max
- length : 11950 mm,
- width : 9900 mm,
- height :2550 mm,
Floor space covered : 118,3 m 2,
Weight : 55000 kg.
 
  3
IDNA29061
MakeAMT
ModelWRL2510
YOM2003
ConditionVery good condition
PhotoSee Photo
Max length: 350 mm,
Single piece rolling output : 500-750,
Max number double strokes per min: 14,
Max production rate: 800 pcs/hr,
Initial billet diameter : 20-23 mm,
Initial billet length : 80-120 mm,
Max length roll forging diameter : 20-23 mm,
Max length roll forging length 240 mm,
Tool length : 1000 mm,
Min automatic cycle time : 4.5,
Installed electric power : 116 kw,
Operation mode : 2-shift,
Dual motor hy unit : 50 hp,
Power supply : 3ph,ac/380/480v/50/60hz,
Compressed air line characteristics:
Pressure : 0,6-0,8 mpa,
Max rated normal air flow rate 1/min: 1000,
Technical Manuals available.
 
  4
IDNI6334
MakeChinese
ModelDA46
YOM2013
ConditionGood Condition
PhotoSee Photo
Distance between rollers : 1000 mm,
Diameter of the rollers : 780 mm,
Length of the rollers : 900 mm,
Maximum rolled diameter : 100 mm,
Adjustment of the distance between rollers : 25 mm,
Speed of the rollers : 25RPM,
Phase Angle of the adjustment of the rollers : 30
Power of the main motor : 160 kW
top